Vivitar Vivicam 3788xi User Manual

 25 c. Then press the OK/Preview button to confirm. the screen will shows Del 1
(OK) No(Menu).
d. If you decided to delete this picture or movie, just press OK/Preview button)
you do not want to delete, press the Menu button to cancel the delete
request.
e.
Menu page for Del Image and del 1 screen, you can press
button to change the  del 1 to  del all Then, press the OK/Preview to
confirm, the screen will show  del all Yes No(Menu).
f. to delete all file, press OK/Preview or if you do not want toYe s
or...

 Menu
d. Press the OK/Preview button to confirm
e. Press the Menu button to preview status
f. Connect the USB port of the camera to the Computer.
g. Operating the  AMCAP.EXE.
h. Then it will appear window show in the computer screen of a dynamic images
shot by the camera.
i. You can cut off the PC camera connection by closing the software, and
can operate the other system.
j. Disconnect the cable and removed the camera from the connection.computer
11. Adjust the setting of camera by Menu function
Besides...

 27 11.1 Self-Timer
When using Self-Timer, you can take your own pictures as well as take for a
group, which has sculpted already. Turn on the Self-Timer and press the
shutter; the camera can work after 10 seconds.
*
1. Turn on the camera.
2. Press the menu button , enter the camera original set-up menu.
3. Press the up or down button to select the capture mode .
4. Press the left or right button to select Self .
5. Press OK to confirm
6. Press menu return to review option.
repeat the operation to cancel...

 3. Press the up or down button to select the
flash mode .
4. Press the left or right button to select the
status of the flashlight.
5. Press OK to confirm
6. Press menu button return to review option.
7. The indicate light of the flash stopped means
the charge is OK 2. Press the menu button; enter the camera
original set-up menu.
Attention:
Charge the flashlight during the interval of taking photos. The green light
to LCD can indicate.
The photo could be taken when the green light stops flash blinking...

 11.3 Adjusting white balance
Adjust white balance to get the excellent photo.
Incandescence lampTaken outdoor
Taken under fluorescent lamp
Taken under incandescence lampSpotAuto
Common spot
Mode
Daylight
Fluorescent lampNormal Set Up
1. Turn on the camera.
2. Press the menu button; enter the camera
set-up menu.
3. Press the up or down button to select white bal .
4. Press the left or right button to select white
needed.
5. Press OK to confirm
6. Press menu return to review option.original
balance
29...

 30 11.4 Adjusting the size of picture
There are 4 sizes for the picture: 1280-,1600-,2048-,2816-. The size of the photo will
adjusted by set up, which decides the picture quantity saved in SD card.
the size is, the less the quantity is in the SD card.
Attention: all photos with different sizes can be saved in the same SD card. But the
camera keeps the present size set until you change this set. The picture quantity will
be changed according to the photo size.
Default setting is 2048,3.0M
Normal set up...

 31
11.5 Adjusting quality of photo
There are 3 set-up options for the camera display on the screen: normal
/best /basic
The photo quality is based on the option you select, which also decides the
quantity saved in SD card. The higher the quality is, the clearer the picture
is and the bigger the space in SD will be taken.
1. Turn on the camera.
2. Press the menu button; enter the camera
original set-up menu.
3. Press the up or down button to select the
Quality .
4. Press the left or right button to...

 32
11.6 Set-up date and time, camera will preset as Off .
Adjusting the data and time:
menu button; enter the camera original set-up menu.
3. Press the up or down button to select set time .
4. Press OK to confirm.
5. Press the left and right button to select set up time.
6. Re-press the up or down button to select the time and date needed.
7. Re- presses the up or down button to adjust the data.
8. Press the left and right button select,
9. Press  OK to confirm,
10. Press,  cance l to return.1. Turn on...

 33 11.7 Format the memory card, camera preset as Format F .
Attention:The photos & information will be cancelled after formatting the card.
Please check your card before format.
1. Press the card to unlock.
2. Put the card into the camera
3. Push the dial to turn on the camera.
4. Select the manual to set-up
5. Press the up & down button to select format
6. Press the left & right button to select format
push OK to confirm.
7. The format finished in short time.
8. Press set-up to return.
and
Attention:...

 34 12.2 How to change the USB model, camera preset as card camera .
12.3 How to change the TV model, camera preset as PAL :1.Turn on the camera.
2.Press the menu button; enter the camera
original set-up menu.
3.Use the up or down key of 4-direction control
button, enter the USB mode .
4.Press the OK button to confirm.
5.Use the up or down key of 4-direction control
button, select the USB model you hoped.
6.Press the OK button to confirm.
7.Press the MENU button to return the preview
state....