Vivitar Vivicam 3788xi User Manual

							 35 12.4 How to set up the auto power off time, camera preset at 5 min.
1. Turn on the camera.
2. Press the menu button; enter the camera
original set-up menu.
3. Use the up or down key of 4 direction control
button, enter the Auto off menu bar.
4. Use the left or right key of 4 direction control
button, select the Auto power off time you hoped.
5. Press the OK button to confirm.
6. Press the MENU button to return the
state.



preview
13. Install software and download picture
13.1 Installation of the Application
Insert the accompanying CD into the CD-ROM
drive and the application starts to install
automatically.
Language select dialogue box will appear
then click English , then click  
and  
Flash mode OffFlash
mode
Off
TV made PALTV
made
PA L
Auto offDisableAuto
offDisable
2/3 EXIT OKMENU OK2/3 EXIT OKMENU OKMENUUSB mode CameraUSB
mode
Camera  
						

							 36 Step1: Put provide disc into CD room, Application will run automatically (or you
may click on CD Room icon then double click on autorun . Exe File to run
setup program)
Step2: Click Ulead Photo Explorer 8 SE Basic then display below diagram.  
						

							 37 Step3: Select language , click next
Step4: Confirm installation, click next  
						

							 38
Step5: Type in serial number (provide in package), click next
Step6: Select installation path, click next  
						

							 39 Step7: Select installation item, click next
Step8: Confirm installation path, click next  
						

							 40
Step9: Select country, click next
Step10: Click next  
						

							 Step12: Installation complete, select reboot PC or not, program can be used
after PC is rebooted.
41 Step11: Select installation items, click next  
						

							 42
13.2 Download picture
Power ON your camera. Connect the camera with the computer, you can
d the photos to the computer, or you can copy the documents you
card of camera, so you can communicate with other users,
letthecameraasaUdisk.
Some OS first connect with the camera, maybe need special set-up.
Note : If camera is not ON, your PC will not recognize the camera asaUdisk.
13.3 Install camera and software under Windows 98 system
Because Windows 98 dont sustain the Mass Storage of Microsoft, so if you
the OS of Windows 98, you need install relevant driver system and then
download the photos correctly, and use the camera as the U disk. downloa
need to the SD
use
you can program can be used after PC is rebooted.
The computer turn on and start-up the Windows 98 SE;
If you are operating application, please exit all of them;
Insure the usage of battery is enough.
Before insert to the camera, please confirm that the camera has turned on;
Before pull out the camera, please confirm that the camera has turned off;
of operating Windows 98 SE need install the USB driver when you
camera with the computer first time. Confirm:
Note:
The user
connect the  
						

							 43 13.4 How to install driver under Windows 98:
1. Insert he attached software disk into CD-ROM driver;
2. Insert the USB cable into the USB port of computer;
3. After confirming the camera has turned on, insert the USB cable into the USB
port of camera;
4. The system of computer management will identify the camera, according to
every indicator, you can complete the installation. Driver on X:\DRIVER\ V1.0 ;
( X: as the driver of computer CD);
5. The computer identify the camera as one new equipment
When you first connect the camera with the computer, computer identifies the
camera automatically. When appears the news of installation finished , click
confirm button. Computer will identify the camera as U disk.
When the camera connects with the computer, the button on the camera
work. cannot
This camera use Mass Storage of Microsoft, when you first insert the camera
the PC, the system will show find new equipment , then it can install
camera automatically, dont need person to operate.
Remarks: After the first time, your computer need not install driver system. 13.5 Install camera under Windows ME/2000/XP
into
the driver of  
						

							 44 Before connect the camera with the computer, please confirm the camera
has turned on; before pull out the camera, and please confirm that the camera has
turned off.
1. Insert the USB cable into the USB port of computer;
2. After confirming the camera has turned on, insert the USB cable into the USB
of camera;
3. The system of computer management will identify the camera automatically.
4. The computer identify the camera as one new equipment
When you first connect the camera with the computer, computer identifies the
camera automatically. When appears the news of installation finished , click
confirm button. Computer will identify the camera as U disk.
* For Mac 10.0, computer identify the camera as (unlabeled) hard disk Note:
port
13.6 Download the photos
After installing the driver system, the camera becomesaUdisk.
1. Double click the icon of my computer on the desktop;
2. Double click the icon of U Disk ;
3. Double click DCIM file ;
4. Save the documents that all final words are JPG to the file of computers
disk you appointed.
* For Mac 10.0, Double click the icon of New harddisk. Repeat step 3&4 to retrieve
photos.hard



Note: Dont open the cameras insert-card cover, install or take out the battery, or
the image files will be broken.