ViewSonic Vt3200-l Manual

Getting Started
2
Installing the LCD TV
Installing the Stand (For 42”)
Screw type1 x 5pcs
Screw type2 x 5pcs
TYPE1TYPE2
Place the display face down on a protective surface. Afterwards attach the neck piece onto the 
display and screw in the 5 screws to secure the neck. then insert the neck onto the bottom stand 
and secure the parts by inserting the screws and tightening them with the screwdriver provied.
Note: Attaching the stand requires two people.
Installing the Stand (For 32”)
Screw x 5 pcs
Place...

Getting Started
3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to 
the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual. 
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do  not
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to...

Getting Started
4
:DOO0RXQW.LW6SHFL

Getting Started
5
FRONT View & SIDE View of the Product
1
2
3
4
5
6 7 8
Item Icon Description
1 Volume
VOL +Increase the volume.
Move to the right or adjust the setting on the OSD menu.
VOL -Decrease the volume.
Move to the left or adjust the setting on the OSD menu.
2 Channel SelectCH -Return to the previous channel.
CH  +Advance to the next channel.
3 Menu MENU
Turn the on-screen display (OSD) menu on / off.
4 Input INPUTSelect the input source.
Enter the submenu.
5 PowerTurn the power on from standby...

Getting Started
6
Rear View of the Product
Pr Pb Y VIDEO
 IN PC/VGA INTV
INPC/VGA
AUDIO
IN REMOTE
CONTROL
OUTAUDIO IN
RL
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUTRS232
USBEARPHONE
OUT
8765234
1
13
12
10
9
11
Item Description
1 Power (AC input)Connect to the AC input power source.
2 Remote Control outputConnect to an IR emitter. This will enable the remote control of 
external equipment.
3 TV Input JackConnect to an antenna or cable TV.
4 VGA signal inputConnect to a PC VGA port.
5 PC/VGA Audio inputConnect to a PC...

Getting Started
7
Connecting the LCD TV
&DEOH6\VWHPRU9+)8+)$QWHQQD6\VWHP
PLQJDORQJZLWKVWDQGDUGGH¿QLWLRQ
analog programming.

• This TV is capable of receiving unscrambled digital programming for both cable and external VHF/
UHF antenna. 
• We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable 
(not supplied) to ensure the best picture quality. 
Cable or VHF/UHF
75-ohm coaxial cableRear side of the TV
VHF/UHF/CABLE input...

Getting Started
8
DVI Connection
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
Pr Pb Y VIDEO
 IN PC/VGA
AUDIO
INAUDIO IN
RL
COMPONENT
VIDEO OUT
Pr YVIDEODVI-HDTV OUT
HDMI OUT
OUTIN
AUDIOL R
Pb
LINE OUT
Audio cable
DVI-to-HDMI cable Rear side of the TV
DVI-to-HDMI cableCATV / Satellite 
antenna cableDVI-to-HDMI adapterAudio cable HD cable box /  
HD satellite box

• For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or adapter), and connect the 
audio jack to the AUDIO IN jacks of PC Audio input.
HDMI...

Getting Started
9
YPbPr or Component Connection
Pr Pb Y VIDEO
 IN PC/VGA
AUDIO
INAUDIO IN
RL
COMPONENT
VIDEO OUT
Pr YVIDEODVI-HDTV OUT
HDMI OUT
OUTIN
AUDIOL R
Pb
LINE OUT
Audio cableComponent  
cable Rear side of the TV
Component cableCATV / Satellite 
antenna cableAudio cableHD cable box /  
HD satellite box

• YPbPr provides better quality than the AV connection.
AV Connection
COMPONENT
VIDEO OUT
Pr YVIDEODVI-HDTV OUT
HDMI OUT
OUTIN
AUDIOL R
Pb
LINE OUT
Pr Pb Y VIDEO
 IN PC/VGA
AUDIO
INAUDIO IN
RL
AV...

Getting Started
10
Programming your Cable or Satellite Box remote
Refer to the user manual from your service provider to determine the setting.
If it requires:
• 3 digits, please try “566”, “565”, “556”, or “688”. It usually works with DISHNetwork.
• 4 digits, please try “0054”. It usually works with Cox.
• 5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.
Personal Computer
Use the LCD TV as the monitor of your computer.
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
VIDEO
 IN PC/VGA...

11
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
 CAUTION
• 2QO\XVHWKHVSHFL