ViewSonic Projector Pro8510L User Manual

46
3. The info page displays the information and status of this projector.
4. After pressing the button “Contact IT Help ”, the HELP DESK window will appear in 
the upper right corner of the screen. You will be able to deliver messages to 
RoomView™ software administrators/users  who connect to the same local area 
network.
For more information, visit  http://www.crestron.com & www.crestron.com/getroomview . 
**Crestron RoomView
On the “Edit Room” page, enter the IP Address (or hostname) as shown on the...

47
PJLink™, SNMP, AMX and Xpanel formats supported
This projector is PJLink™, SNMP V.1, AMX or Xpanel  V1.10 compliant. For details, 
please follow its user guide or website resp ectively to control and manage projectors.
Using the projector in standby mode
Some of the projector functions are available  in standby mode (plugged in but not turned 
on). To use these functions, be sure the ca ble connections are correctly made. For the 
connection methods, see the  Connection chapter.
Active VGA Out...

48
Adjusting the Audio In 2 setting
1. Open the OSD menu and go to the BASIC > Audio Settings  > Audio In 2  menu. 
2. Press  /  to decide the audio input source for the  AUDIO IN 2/MIC  port. This 
will affect the connection method for differ ent devices, and where the sound is from.
• When  Audio is selected:
The selected input signal determines which sound will be played by the projector speaker, and 
which sound will be output from the projector when AUDIO OUT is connected. For instance, if 
you...

49
Shutting down the projector
1. Press Power and a confirmation message is 
displayed prompting you. 
If you dont respond in a few seconds, the 
message will disappear.
2. Press  Power a second time.
3. Once the cooling proce ss finishes, a Power 
Off Ring Tone will be heard. Disconnect the 
power cord from the wall socket if the 
projector will not be  used in an extended 
period of time.
To turn off the ring tone, see  Turning off the Power On/Off Ring Tone on page 48  for details.
CAUTION
• To...

50
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
The menu items are available when the projector  detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1. 
DISPLAY
Screen ColorOff/Blackboard/Greenboard/Whiteboard
Aspect Ratio Auto/4:3/16:9/16:10/Panorama/2.35:1/
Anamorphic
Keystone Auto V 
Keystone
Off/On...

51
Main menuSub-menu Options
3. POWER 
MANAGEMENT
Auto Power On Computer Disable/Enable
CEC Disable/Enable
Direct Power On Off/On
Smart Energy Auto Power Off Disable/10 min/20 min/30 min
Sleep Timer
Disable/30 min/1 hr /2 hr/3 hr/
4 hr/8 hr/12 hr
Power Saving Enable/Disable
MHL Settings Power Out HDMI/MHL 4/USB 1/USB 2
MHL Reset Reset/Cancel
Standby 
Settings Active VGA Out Off/On
Active Audio Out Off/On
4. 
BASIC
Audio SettingsAudio Mode
Standard/Speech/
Entertainment
Mute On/Off
Audio Volume
Audio In 2...

52
Main menuSub-menu Options
4. 
BASICMy ButtonAuto/Projection (Projector Position)/Menu 
Position/Color Temp./Brightness/Contrast/3D 
Settings/Screen Color/Splash Screen/
Message/Quick Auto Search/CEC/DCR/Closed 
Caption/Power Saving/Freeze/INFORMATION/
Aspect Ratio/Power Out
5. 
ADVANCED
3D Settings3D Glasses DLP/3D VESA
3D Sync
Auto/Off/Frame 
Sequential/Frame 
Packing/Top-Bottom/
Side-by-Side
3D Sync Invert Disable/Invert
HDMI Settings HDMI Format Auto/RGB/YUV
HDMI Range Auto/Enhanced/Normal
LAN...

53
Main menuSub-menu Options
6. SYSTEM
Language Multi-language OSD 
selection
Projector Position Front Table/Rear Table/
Rear Ceiling/Front 
Ceiling
Menu Settings Menu Display Time
5 sec/10 sec/15 sec/20 
sec/25 sec/30 sec
Menu Position Center/Top-Left/Top-
Right/Bottom-Left/
Bottom-Right
High Altitude Mode On/Off
Quick Auto Search Off/On
Security Settings Change Password
Power On Lock Off/On
Panel Key Lock Off/On
Remote Control Code 1/2/3/4/5/6/7/8
7. 
INFORMATION
• Source
• Color Mode
• Resolution
•...

54
Description of each menu
FunctionDescription
Screen ColorSee Using Screen Color on page 34  for details.
Aspect Ratio See Selecting the aspect ratio on page 32  for details.
Keystone See Correcting keystone on page 30  for details.
Corner Adj. See Adjusting 4 corners on page 30  for details.
Position Displays the position adjustment
 page. To move the projected 
image, use the directional arrow keys. The values shown on the 
lower position of the page change with every key press you made 
until they...

55
FunctionDescription
Color ModeSee Selecting a picture mode on page 33  for details.
Brightness See Adjusting Brightness on page 34  for details.
Contrast See Adjusting Contrast on page 34  for details.
Color Temp. See 
Selecting a Color Temperature on page 35  and Setting a 
preferred color temperature on page 35  for details.
Advanced Color
See 
Adjusting Color on page 34  for details.
Tint
See  Adjusting Tint on page 34  for details.
Sharpness
See  Adjusting Sharpness on page 35  for details.
Gamma...