ViewSonic Projector Pro8400 User Manual

ViewSonic  Pro8400 59
Compatibility Modes
Computer: 
Compatibility Resolution H-Sync [KHz] V-Sync [Hz]
VGA 640 x 480 24.69 50
31.5 60
37.9 72
37.5 75
43.3 85
SVGA 800 x 600 30.99 50 35.2 56
37.9 60
48.1 72
46.9 75
53.7 85
XGA 1024 x 768 39.63 50 48.4 60
56.5 7060 75
SXGA 1280 x 1024 64 60
80 75
UXGA 1600 x 1200 47.7 60
Mac 13 640 x 480 35 67
Mac 16 832 x 624 49.72 75
Mac 19 1024 x 768 60.24 75
1080i30 1920 x 1080 33.75 60
1080i25 1920 x 1080 28.13 50
480p 720 x 480 31.47 59.94
576p 720 x 576 31.25 50...

ViewSonic  Pro8400 60
Video:  
Compatibility Resolution H-Sync [KHz] V-Sync [Hz]
1080p 1920 x 1080 67.5 60
1080p 1920 x 1080 56.3 50
1080i 1920 x 1080 33.8 60
1080i 1920 x 1080 28.1 50720p 1280 x 720 45 60
720p 1280 x 720 37.5 50
576p 720 x 576 31.3 50 576i 720 x 576 15.6 50
480p 720 x 480 31.5 60 480i 720 x 480 15.8 60 

ViewSonic  Pro8400 61
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector for 
repairs. If the problem persists, contact your local reseller or service center. Please 
refer to LED Indicator Messages as well.
Start-up problems
If no lights turn on:
„Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power.
„Press the power button again.
„Unplug the power cord and wait for a short while, then plug it...

ViewSonic  Pro8400 62
RS-232 Command and Configuration
POWER ON / POWER OFF
 POWER ON BE,EF,10,05,00,C6,FF,11,11,01,00,01,00
 POWER OFF BE,EF,02,06,00,6D,D2,34,00,00,00,00,00
SOURCE SELECT
Computer 1 BE,EF,02,06,00,BC,D3,35,00,00,00,00,00
Computer 2 BE,EF,02,06,00,8F,D3,36,00,00,00,00,00
COMPONENT BE,EF,02,06,00,5E,D2,37,00,00,00,00,00
COMPOSITE BE,EF,02,06,00,A1,D2,38,00,00,00,00,00
S-VIDEO BE,EF,02,06,00,70,D3,39,00,00,00,00,00
HDMI 1 BE,EF,02,06,00,43,D3,3A,00,00,00,00,0
HDMI 2...

ViewSonic  Pro8400 63
                 
 D-Sub 9 pin
11 CD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI           Wire List
C1 COLOR C2
1Black 1
2Brown 2
3Red 3
4 Orange 4
5 Yellow 5
6Green 6
7Blue 7
8 Purple 8
9White 9
SHELL DW SHELL 

ViewSonic  Pro8400 64
IR Control Code
System Code: 83F4
Format : NEC
 
HDMI1 HDMI2 Compo
PC
Video
Swap
Default
08
87
6D 6E6F
67
8D
82
83 8C81
85
84
05
0A 01
62
04 09
0B
03 63 06
8F 8E 

65
ViewSonic   Pro8400
Customer Support
For technical support or product service, see the table below or contact your reseller .
Note : You will need the product serial number.
Country/Region Website T = Telephone
F = FAXEmail
Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818
NZ= 0800 008 [email protected]
Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= [email protected]
Europe www.viewsoniceurope.com...

66
ViewSonic   Pro8400
Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and workmanship, under normal 
use, during the warranty period. If a product proves to be defective in material or workmanship during 
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. 
Replacement product or parts may include remanufactured or refurbished parts or components. 
Limited Three...

67
ViewSonic   Pro8400
 h.   Use of supplies or parts not meeting ViewSonic’s specifications.
 
i.   Normal wear and tear.
 
j.   Any other cause which does not relate to a product defect.
3.
  Removal, installation, and set-up service charges.
How to get service: 
1. 
    For information about receiving service under warranty, contact ViewSonic Customer Support 
(please refer to “Customer Support” page). You will need to provide your product’s serial number.
2. 
 
 To obtain warranted service, you will...

68
ViewSonic   Pro8400
Mexico Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the 
warranty period. If a product proves to be defective in material or workmanship during the warranty period,  ViewSonic 
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include 
remanufactured or refurbished parts or components &...