ViewSonic Projector Pro8400 User Manual

ViewSonic  Pro8400 49
6. Network Display Management displays th e Device Management and pwPresenter 
Management information.
Device Management allows you to change device settings
.
i. Click to change display port allows you to select display location of screen. 
ii. Change password allows you to change password for the user type.
iii. Disconnect allows you to disconnect the projector from network.
iv. Access device via webpage allows you to access ViewSonic webpage con- trol system.
v. View device...

ViewSonic  Pro8400 50
pwPresenter Management allows you to select which computer to be connected 
and transfer the desktop content to the network projector.
7. Disconnect allows you to disconnect fr om the projector(s) by clicking the 
Disconnect icon.
Important
„Be sure to turn off other virtual network control programs before using 
pwPresenter. 

ViewSonic  Pro8400 51
Displaying pictures with a USB storage device
The built-in the ImageViewer application can display packaged images on a USB 
storage device (e.g. USB flash drive, and USB disk), a digital camera, or other device. 
You can connect a USB storage device to your projector.
1. Take a USB cable and connect the larger end to the USB A socket on the 
projector, and smaller end to the USB port of the device. If you are using a USB 
flash drive, connect it directly to the 
USB A socket.
2....

ViewSonic  Pro8400 52
„Thumbnail/Slide show/Display: Display thumbnails, start the slide show or 
display the selected image.
„Name Order/Extend Order/Size Order/Time Order: Select the order setting 
by file/folder name, extended file name, image size or time.
„EXIF ON/EXIF OFF: Display the Exif information of the image or not.
„File Name On/File Name Off: Display the file name or not.
The projector supports the following image formats:
„JPEG (JPG)
„Bitmap (BMP)
„Portable Network Graphic (PNG)
„Graphics...

ViewSonic  Pro8400 53
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt 
or spots will project on the screen and diminish image quality. If any other parts need 
replacing, contact your dealer or qualified service personnel. When cleaning any part 
of the projector, always switch off and unplug the projector first.
Warning
Never open any of the covers on the projector. Dangerous electrical voltages 
inside the projector can cause severe injury. Do not...

ViewSonic  Pro8400 54
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp gradually 
decreases and the lamp becomes more susceptible to breakage. We recommend 
replacing the lamp if a warning message is displayed. Do not attempt to replace the 
lamp yourself. Contact the qualified service personnel for replacement.
„The lamp is extremely hot right after turning off the projector. If you touch the 
lamp, you may scald your finger. When you replace the lamp, wait...

ViewSonic  Pro8400 55
1. Turn off the projector.
2. If the projector is installed in a ceiling mount, remove it
3. Unplug the power cord.
4. Loosen the screw in the side of the lamp cover and remove the cover.
5. Remove the screws from the lamp module, raise the handle, and lift out the 
module.
6. Insert the new lamp module into the projector and tighten the screws.
7. Replace the lamp cover and tighten the screw.
8. Turn on the projector.  If the lamp does not turn on after the warm-up period, try...

ViewSonic  Pro8400 56
Specifications
Display system Single 0.65 DLP panel
Resolution 1080p (1920 × 1080 pixels)
Zoom 1.5X
F/No. 2.41 - 2.97
Focal length 20.72 - 31mm
Screen size 30” - 300”
Lamp 280W
Input terminal D-Sub 15-pin x 2, S-Video x 1, Video x 1, Audio signal input (3.5 
mm stereo mini jack) x 2, HDMI x 2, Component RCA jack x 1, 
RCA audio jack (L/R) x 1, 3.5 mm  Mic input x1, USB  A type x1 
(supports firmware update, USB flash drive display and wireless 
dongle for USB display), USB mini-B...

ViewSonic  Pro8400 57
Dimensions
 334.6 mm (W) x 264.5 mm (D) x 109.5 mm (H)
Ceiling mount installation
264.5
109.5334.6
64.5
84.9
174 227
103
Ceiling mount screws:
M4 x 8 (Max. L = 8 mm)Unit: mm 

ViewSonic  Pro8400 58
Appendix
LED Indicator Messages
LED type Color Status Meaning
Power LED Blue Solid Lamp life end
Lamp LED Red Flash
Temp LED Red Flash
Power LED Blue Solid Standby mode when green mode is 
turned on.
Lamp LED Red Off
Temp LED Red Off
Power LED Blue Flash Standby mode when green mode is 
turned off.
Lamp LED Red Off
Temp LED Red Off
Power LED Blue Solid Powering up
Lamp LED Red Off
Temp LED Red Off
Power LED Blue Solid Normal operation
Lamp LED Red Off
Temp LED Red Off
Power LED...