ViewSonic Projector PJD6551W User Manual

46
PJLink™, SNMP, AMX and Xpanel formats supported
This projector is PJLink™, SNMP V.1, AMX or Xpanel  V1.10 compliant. For details, 
please follow its user guide or website resp ectively to control and manage projectors.
Using the projector in standby mode
Some of the projector functions are available  in standby mode (plugged in but not turned 
on). To use these functions, be sure you have turned on the corresponding menus under 
SOURCE  > Standby Settings , and the cable connections are correctly...

47
Adjusting the Audio In 2 setting (for selected models)
1. Open the OSD menu and go to the  SYSTEM SETTING: ADVANCED > Audio 
Settings >  Audio In 2 menu. 
2. Press  /  to decide the audio input source for the  AUDIO IN 2/MIC  port. This 
will affect the connection method for differ ent devices, and where the sound is from.
• When  Audio is selected:
The selected input signal determines which sound will be played by the projector speaker, and 
which sound will be output from the projector when AUDIO...

48
Shutting down the projector
1. Press Power and a confirmation message is 
displayed prompting you. 
If you dont respond in a few seconds, the 
message will disappear.
2. Press  Power a second time.
3. Once the cooling proce ss finishes, a Power 
Off Ring Tone will be heard. Disconnect the 
power cord from the wall socket if the 
projector will not be  used in an extended 
period of time.
To turn off the ring tone, see  Turning off the Power On/Off Ring Tone on page 47  for details.
CAUTION
• To...

49
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
The menu items are available when the projector  detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1. 
DISPLAY
Screen ColorOff/Blackboard/Greenboard/Whiteboard
Aspect Ratio Auto/4:3/16:9 (PJD6252L/PJD7326/
PJD7720HD)/16:10 (PJD6551W/
PJD7526W)/Panorama...

50
Main menuSub-menu Options
3. SOURCE
Quick Auto Search Off/On
3D Settings 3D Sync Auto/Off/Frame Sequential/
Frame Packing/Top-Bottom/
Side-by-Side
3D Sync Invert Disable/Invert
Standby 
Settings Active VGA Out 
(PJD6252L/PJD6551W/
PJD7326/PJD7526W)
Off/On
Active Audio Out Off/On
LAN Control 
(PJD6252L/PJD6551W/
PJD7326/PJD7526W) Off/On
Auto Power On Computer (PJD6252L/
PJD6551W/PJD7326/
PJD7526W)
Disable/Enable
CEC Disable/Enable
Direct Power On Off/On
Smart Energy Auto Power Off Disable/10 min/20...

51
Main menuSub-menu Options
4. 
SYSTEM 
SETTING: 
BASIC
My ButtonAuto (PJD6252L/PJD6551W/PJD7326/
PJD7526W)/Projection (Projector Position)/
Menu Position/Color Temp./Brightness/
Contrast/3D Settings/Screen Color/Splash 
Screen/Message/Quick Auto Search/CEC/DCR/
Closed Caption (PJD6252L/PJD6551W/
PJD7326/PJD7526W)/Power Saving/Freeze/
INFORMATION/Aspect Ratio
Advanced Pattern
Off/Test Card/Note Pad 
/World Map/Stave/
Trellis Chart
Message On/Off
Presentation Timer Timer Period
Timer Display
Timer...

52
Main menuSub-menu Options
5. 
SYSTEM 
SETTING: 
ADVANCED
Lamp SettingsLamp Mode
Normal/Eco/Dynamic/
SuperEco
Reset Lamp Hours
Lamp Hours
Filter Settings Filter Mode On/Off
Reset Filter Hours
Filter Hours
Remote Control Code 1/2/3/4/5/6/7/8
Advanced Security Settings
Change Password
Power On Lock
Panel Key Lock Off/On
Reset Settings Reset/Cancel
6. 
INFORMATIONCurrent System Status •
Source
• Color Mode
• Resolution
• Color System
• IP Address 
(PJD6252L/PJD6551W/
PJD7326/PJD7526W)
• MAC Address...

53
Description of each menu
FunctionDescription
Screen ColorSee Using Screen Color on page 32  for details.
Aspect Ratio See Selecting the aspect ratio on page 30  for details.
Keystone See Correcting keystone on page 28  for details.
Corner Adj. 
(PJD7326/
PJD7526W) See 
Adjusting 4 corners (PJD7326/PJD7526W) on page 29  for 
details.
Position 
(PJD6252L/
PJD6551W/
PJD7326/
PJD7526W) Displays the position adjustment
 page. To move the projected 
image, use the directional arrow keys. The values shown on...

54
FunctionDescription
AdvancedColor
See 
Adjusting Color on page 32 for details.
Tint
See  Adjusting Tint on page 33  for details.
Sharpness
See  Adjusting Sharpness on page 33  for details.
Gamma
See  Selecting a gamma setting on page 33  for details.
Brilliant Color
See  Adjusting Brilliant Color on page 33  for details.
Noise Reduction
See  Reducing image noise on page 33  for details.
Color Management
See  Color Management on page 34  for details.
Reset Color 
Settings Returns all color settings to...

55
FunctionDescription
Smart EnergyAuto Power Off
See 
Setting Auto Power Off on page 61  for details.
Sleep Timer
See  Setting Sleep Timer on page 61  for details.
Power Saving
See  Setting Power Saving on page 61  for details.
Smart Restart Selecting 
Enable enables you to restart the projector 
immediately within 120 seconds after turning it off. After 120 
seconds, if the projector is not turn ed on again, it will directly 
enter the standby mode.
It takes some time to initiate this function. Make...