ViewSonic Projector PJD6551W User Manual
Have a look at the manual ViewSonic Projector PJD6551W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
46 PJLink™, SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website resp ectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SOURCE > Standby Settings , and the cable connections are correctly made. For the connection methods, see the Connection chapter. Active VGA Out (for selected models) Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1 . Active Audio Out Selecting On outputs an audio signal when the AUDIO IN 1 socket is correctly connected to a proper device. LAN Control (for selected models) Selecting On allows the projector to provide the network function when it is in standby mode. See Controlling the projector through a LAN environment (for selected models) on page 39 for details. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See Connection on page 15 for more details. Adjusting the audio mode 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Mode menu. 2. Press / to select a preferred audio mode. If available, you can press Audio Mode on the remote control to select a preferred audio mode. Muting the sound 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press on the remote control to toggle the projector audio between on and off. Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press // on the remote control to adjust the projector’s sound level.
47 Adjusting the Audio In 2 setting (for selected models) 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio In 2 menu. 2. Press / to decide the audio input source for the AUDIO IN 2/MIC port. This will affect the connection method for differ ent devices, and where the sound is from. • When Audio is selected: The selected input signal determines which sound will be played by the projector speaker, and which sound will be output from the projector when AUDIO OUT is connected. For instance, if you select a D-Sub / Comp. 1 source, the proj ector can play the sound received from AUDIO IN 1. • When Microphone is selected: Adjusting the microp hone sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Microphone Volume menu. 2. Press / to select a desired sound level. This function is only availa ble when the SYSTEM SETTING: ADVANCED > Audio Settings > Audio In 2 menu is set to Microphone. Turning off the Power On/Off Ring Tone 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Power On/Off Ring Tone menu. 2. Press / to select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. Device COMPUTER IN 1 COMPUTER IN 2 Video/S-Video Audio input portAUDIO IN 1 AUDIO IN 2AUDIO IN 2 The projector can play the sound from...AUDIO IN 1 AUDIO IN 2AUDIO IN 2 Audio output portAUDIO OUT AUDIO OUTAUDIO OUT DeviceCOMPUTER IN 1 COMPUTER IN 2 Video/S-Video Audio input portAUDIO IN 1 AUDIO IN 1AUDIO IN 1 The projector can play the sound from...• AUDIO IN 1 •MIC • AUDIO IN 1 •MIC• AUDIO IN 1 •MIC Audio output portAUDIO OUT AUDIO OUT AUDIO OUT
48 Shutting down the projector 1. Press Power and a confirmation message is displayed prompting you. If you dont respond in a few seconds, the message will disappear. 2. Press Power a second time. 3. Once the cooling proce ss finishes, a Power Off Ring Tone will be heard. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. To turn off the ring tone, see Turning off the Power On/Off Ring Tone on page 47 for details. CAUTION • To protect the lamp, the projector will not respond to any commands during the cooling process. • To shorten the cooling time, you can also activate the Quick Power Off function. See Quick Power Off on page 55 for details. • Do not unplug the power cord before the projector shutdown sequence is complete.
49 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 1. DISPLAY Screen ColorOff/Blackboard/Greenboard/Whiteboard Aspect Ratio Auto/4:3/16:9 (PJD6252L/PJD7326/ PJD7720HD)/16:10 (PJD6551W/ PJD7526W)/Panorama (PJD6551W/ PJD7526W/PJD7720HD)/2.35:1/ Anamorphic (PJD6551W/PJD7526W/ PJD7720HD) Keystone Corner Adj. (PJD7326/PJD7526W) Position (PJD6252L/PJD6551W/PJD7326/PJD7526W) Phase (PJD6252L/PJD6551W/PJD7326/PJD7526W) H. Size (PJD6252L/PJD6551W/PJD7326/PJD7526W) Zoom 2. PICTURE Color Mode Brightest/Dynamic/Standard/ViewMatch sRGB/Movie/ DICOM SIM (PJD7326/PJD7526W) Brightness Contrast Color Temp. Warm Red Gain/Green Gain/ Blue Gain/Red Offset/ Green Offset/Blue Offset Normal Neutral Cool OverScan Off/1/2/3/4/5 HDMI Settings HDMI Format Auto/RGB/YUV HDMI Range Auto/Enhanced/Normal Advanced Color Tint Sharpness Gamma 1/2/3/4/5/6/7/8 Brilliant Color Off/1/2/3/4/5/6/7/8/9/10 Noise Reduction Color Management Primary Color Hue Saturation Gain Reset Color Settings Reset/Cancel
50 Main menuSub-menu Options 3. SOURCE Quick Auto Search Off/On 3D Settings 3D Sync Auto/Off/Frame Sequential/ Frame Packing/Top-Bottom/ Side-by-Side 3D Sync Invert Disable/Invert Standby Settings Active VGA Out (PJD6252L/PJD6551W/ PJD7326/PJD7526W) Off/On Active Audio Out Off/On LAN Control (PJD6252L/PJD6551W/ PJD7326/PJD7526W) Off/On Auto Power On Computer (PJD6252L/ PJD6551W/PJD7326/ PJD7526W) Disable/Enable CEC Disable/Enable Direct Power On Off/On Smart Energy Auto Power Off Disable/10 min/20 min/30 min Sleep Timer Disable/30 min/1 hr /2 hr/3 hr/ 4 hr/8 hr/12 hr Power Saving Enable/Disable Smart Restart Disable/Enable Quick Power Off Disable/Enable Lamp SPA Mode (PJD7326/PJD7526W) Disable/Enable LAN Control Settings (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) LAN Control Settings DHCP ON/Static IP Projector IP Address Subnet Mask Default Gateway DNS Server Apply 4. SYSTEM SETTING: BASIC Language Multi-language OSD selection Projector Position Front Table/Rear Table/ Rear Ceiling/Front Ceiling Menu Settings Menu Display Time 5 sec/10 sec/15 sec/20 sec/ 25 sec/30 sec Menu Position Center/Top-Left/Top-Right/ Bottom-Left/Bottom-Right Blank Timer Disable/5 min/10 min/15 min/ 20 min/25 min/30 min Splash Screen Black/Blue/ViewSonic/ Screen Capture/Off Screen Capture
51 Main menuSub-menu Options 4. SYSTEM SETTING: BASIC My ButtonAuto (PJD6252L/PJD6551W/PJD7326/ PJD7526W)/Projection (Projector Position)/ Menu Position/Color Temp./Brightness/ Contrast/3D Settings/Screen Color/Splash Screen/Message/Quick Auto Search/CEC/DCR/ Closed Caption (PJD6252L/PJD6551W/ PJD7326/PJD7526W)/Power Saving/Freeze/ INFORMATION/Aspect Ratio Advanced Pattern Off/Test Card/Note Pad /World Map/Stave/ Trellis Chart Message On/Off Presentation Timer Timer Period Timer Display Timer Position Timer Counting Direction Sound Reminder Start Counting/Off 5. SYSTEM SETTING: ADVANCED High Altitude Mode On/Off DCR On/Off Audio Settings Audio Mode Standard/Speech/ Entertainment Mute On/Off Audio Volume Audio In 2 (PJD6252L/ PJD6551W/PJD7326/ PJD7526W) Audio/Microphone Microphone Volume Power On/Off Ring Tone On/Off Closed Caption (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Closed Caption Enable On/Off Caption Version CC1/CC2/CC3/CC4
52 Main menuSub-menu Options 5. SYSTEM SETTING: ADVANCED Lamp SettingsLamp Mode Normal/Eco/Dynamic/ SuperEco Reset Lamp Hours Lamp Hours Filter Settings Filter Mode On/Off Reset Filter Hours Filter Hours Remote Control Code 1/2/3/4/5/6/7/8 Advanced Security Settings Change Password Power On Lock Panel Key Lock Off/On Reset Settings Reset/Cancel 6. INFORMATIONCurrent System Status • Source • Color Mode • Resolution • Color System • IP Address (PJD6252L/PJD6551W/ PJD7326/PJD7526W) • MAC Address (PJD6252L/PJD6551W/ PJD7326/PJD7526W) • Firmware Version
53 Description of each menu FunctionDescription Screen ColorSee Using Screen Color on page 32 for details. Aspect Ratio See Selecting the aspect ratio on page 30 for details. Keystone See Correcting keystone on page 28 for details. Corner Adj. (PJD7326/ PJD7526W) See Adjusting 4 corners (PJD7326/PJD7526W) on page 29 for details. Position (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC input signal is selected. The adjustment range may va ry under different timings. Phase (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W)Adjusts the clock phase to reduce image distortion. This function is only available when a PC input signal is selected. H. Size (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) Adjusts the horizontal width of the image. This function is only available when a PC input signal is selected. Zoom See Magnifying and searching for details on page 29 for details. Color Mode See Selecting a picture mode on page 31 for details. Brightness See Adjusting Brightness on page 32 for details. Contrast See Adjusting Cont rast on page 32 for details. Color Temp. See Selecting a Color Temperature on page 33 and Setting a preferred color temperature on page 33 for details. OverScan Adjusts the overscan rate from 0% to 5%. This function is only available when a Composite Video, S-Video or HDMI input signal is selected. HDMI Settings See Changing HDMI input settings on page 26 for details. 1. DISPLAY menu 2. PICTURE menu
54 FunctionDescription AdvancedColor See Adjusting Color on page 32 for details. Tint See Adjusting Tint on page 33 for details. Sharpness See Adjusting Sharpness on page 33 for details. Gamma See Selecting a gamma setting on page 33 for details. Brilliant Color See Adjusting Brilliant Color on page 33 for details. Noise Reduction See Reducing image noise on page 33 for details. Color Management See Color Management on page 34 for details. Reset Color Settings Returns all color settings to the factory preset values. Quick Auto SearchSee Switching input signal on page 26 for details. 3D Settings See Using the 3D functions on page 38 for details. Standby Settings See Using the projector in standby mode on page 46 for details. Auto Power On Computer (PJD6252L/PJD 6551W/PJD7326/PJD7526W) Selecting Enable allows the projector to turn on automatically once the VGA signal is fed through the VGA cable. CEC See Using the CEC function on page 37 for details. Direct Power On Selecting On allows the projector to turn on automatically once the power is fed through the power cord. 2. PICTURE menu 3. SOURCE menu
55 FunctionDescription Smart EnergyAuto Power Off See Setting Auto Power Off on page 61 for details. Sleep Timer See Setting Sleep Timer on page 61 for details. Power Saving See Setting Power Saving on page 61 for details. Smart Restart Selecting Enable enables you to restart the projector immediately within 120 seconds after turning it off. After 120 seconds, if the projector is not turn ed on again, it will directly enter the standby mode. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. When Enable is selected, the Quick Power Off function will be automatically set to “Enable”. Quick Power Off Selecting Enable enables the function and the projector will not enter the cooling process after being shut down. Selecting Disable disables the function and the projector will enter normal cooling process after being shut down.If you attempt to restart the projector right after it’s been turned off, it may not be turned on successfully and will rerun its cooling procedure. When Disable is selected, the Smart Restart function will be automatically turned off. Lamp SPA Mode (PJD7326/ PJD7526W) Selecting Enable sets the projector’s cooling time after being shut down to 180 seconds. If Disable is selected, the cooling procedure will depend on the Smart Restart and Quick Power Off settings. When Enable is selected, the Smart Restart and Quick Power Off functions will be automatically turned off. LAN Control Settings (PJD6252L/ PJD6551W/ PJD7326/ PJD7526W) See Controlling the projector through a LAN environment (for selected models) on page 39 for details. 3. SOURCE menu