ViewSonic Projector PJD6352LS User Manual

54
Function Description
Splash ScreenAllows you to select which logo screen will be displayed 
during projector start-up.
Screen CaptureSee Creating your own startup screen on page 37 for 
details.  
My ButtonSets a hotkey on remote control.
AdvancedPattern
The projector can display several test patterns. It helps you 
adjust the image size and focus and check that the projected 
image is free from distortion.
Message
Selecting On displays the current information on the screen 
when the projector is...

55
Function Description
Closed CaptionSelects a preferred closed captioning mode when the selected 
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration, 
and sound effects of TV programs and videos that are 
closed captioned (usually marked as CC in TV listings).This function is only available when a Composite video 
or S-Video input signal is selected and its system format 
is NTSC.
To view captions, select CC1, CC2, CC3, or CC4 (CC1 
displays captions in...

56
Function Description
Current System 
StatusSource
Shows the current signal source.
Color Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format.
Lamp Hours
Displays the number of hours the lamp has been used.
Filter Hours
Displays the number of hours the filter has been used.
IP Address
Shows the IP address of your projector.
MAC Address
Shows the MAC Address of your projector.
MAC Address stands for Media...

57
Maintenance
Care of the projector
You need to keep the lens and/or filter (optional accessory) clean on a regular basis.
Never remove any parts of the projector. Contact your dealer when any part of the projector 
needs replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
• Use a canister of compressed air to remove dust.
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens 
cleaner and gently wipe the lens surface.
CAUTION...

58
• If your projector is ceiling-mounted or is not easily accessible, pay special attention to 
your personal safety when replacing the dust filter.
Installing the dust filter
1. Be sure to turn off the projector and unplug it 
from power source.
2. As the arrows shown to the right, fit the filter 
by aligning and inserting it into the projector 
slots. Make sure it clicks into place.
For first time installation:
3. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Filter 
Settings menu.
4....

59
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically 
calculated by the built-in timer.
To obtain the lamp hour information:
1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > 
Lamp Settings menu.
2. Press Enter and the Lamp Settings page is displayed.
3. You will see the Lamp Hours information on the menu.
4. To leave the menu, press Exit.
You can also get the lamp hour information on the INFORMATION...

60
Timing of replacing the lamp
When the Lamp indicator light lights up red or a message appears suggesting it is time to 
replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a 
malfunction in the projector and in some instances the lamp may explode.
CAUTION
The Lamp indicator light and Temperature indicator light will light up if the lamp becomes too 
hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp indicator light or 
Temperature...

61
Replacing the lamp
Turn the power off and disconnect the projector from the power outlet. Please contact 
qualified service personnel for changing the lamp.
Type number: 
• PJD6350/PJD6351Ls: RLC-092
• PJD6550Lw/PJD6551Lws: RLC-093
• PJD6352/PJD6352Ls: RLC-097
• PJD6552Lw/PJD6552Lws: RLC-098 

62
Indicators
LightStatus & Description
Power events
Blue
FlashingOff OffStand-by mode
Blue Off OffPowering up
Blue Off OffNormal operation
Blue
FlashingOff OffNormal power-down cooling (3 sec)
Red Off OffDownloading
Lamp events
Blue
FlashingOff RedFirst Lamp-Lit error cooling (60 sec)
Off Off RedLamp error in normal operation (30 sec)
Blue Off RedCW start fail (30 sec)
Thermal events
Off Red OffFan 1 error (the actual fan speed is +25% outside the 
desired speed.)
Off Red RedFan 2 error (the actual fan...

63
Troubleshooting
The projector does not turn on.
No picture
Blurred image
Remote control does not work
CauseRemedy
There is no power from the power cord.Plug the power cord into the AC inlet on the 
projector, and plug the power cord into the power 
outlet. If the power outlet has a switch, make sure 
that it is switched on.
Attempting to turn the projector on again 
during the cooling process.Wait until the cooling down process has completed.
CauseRemedy
The video source is not turned on or 
connected...