ViewSonic Projector PJD6352LS User Manual

4
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers the following features.
• Dynamic mode adjusting the power consumption of the lamp according to the 
brightness of the image being projected
• Power saving function decreasing the power consumption of the lamp by up to 70% 
when no input signal can be detected for a set period of time.
• Presentation timer for...

5
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these 
items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
Optional accessories
1. Replacement lamp (RLC-092 for PJD6350/PJD6351Ls. RLC-093 for PJD6550Lw/
PJD6551Lws. RLC-097 for PJD6352/PJD6352Ls. RLC-098 for PJD6552Lw/
PJD6552Lws.)
2. Soft carry case
3. VGA-Component adapter
4....

6
Projector exterior view
1. External control panel
(See Projector on page 7 for 
details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Front IR remote sensor
5. Adjuster foot
6. Focus and Zoom rings (for 
PJD6255/PJD6350/PJD6555w/
PJD6550Lw)
Focus ring (for PJD6385s/
PJD6351Ls/PJD6585ws/
PJD6551Lws)
7. HDMI/MHL port
8. Projection lens
9. Lens cap
10. Audio signal output socket
11. Audio signal input socket 2/
Microphone
12. Audio signal input socket 1
13. S-Video input socket
14. Video input socket...

7
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the projected image.
3. Menu
Turns on the On-Screen Display (OSD) 
menu. 
Exit
Goes back to previous OSD menu, exits 
and saves menu settings.
4. / / /  (Keystone keys)
Manually corrects distorted images 
resulting from an angled projection.
Left/Right/Up/Down
Selects the desired menu items and makes 
adjustments.
5. Power
Toggles the projector between standby 
mode and Power ON.
6....

8
Remote control
To use the remote mouse control keys 
(Page Up, Page Down,  , and ), see 
Using the remote mouse control on 
page 10 for details.
1. Power
Toggles the projector between standby 
mode and Power ON.
2. Source selection keys 
•COMP1/COMP2
Selects D-Sub / Comp. 1 or D-Sub / 
Comp. 2 source for display.
•HDMI
Selects HDMI source for display.
3. Auto Sync
Automatically determines the best 
picture timings for the displayed 
image.
4. / / /  (Keystone keys)
Manually corrects distorted images...

9 Operating the LASER pointer
The Laser Pointer is a presentation aid for professionals. It emits colored light when you 
press it. The laser beam is visible. It is necessary to press and hold Laser for continuous 
output.
Do not look into the laser light window or shine the laser light beam on yourself or others. See 
the warning messages on the back of the remote control prior to using it.
The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and 
keep this remote...

10
To switch the code for the remote control, press ID set and 
the number button corresponding to the remote control code 
set in the projector OSD together for 5 seconds or more. 
The initial code is set to 1. When the code is switched to 8, 
the remote control can control every projector.
If different codes are set on the projector and remote control, 
there will be no response from the remote control. When that 
happens, switch the code for the remote control again.
Using the remote mouse control
The...

11
Replacing the remote control batteries
1. To open the battery cover, turn the remote control over to view its back, press on the 
finger grip on the cover and pull it up in the direction of the arrow as illustrated.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing 
the battery polarities as indicated in the base of the battery compartment. Positive (+) 
goes to positive and negative (-) goes to negative.
3. Refit the cover by aligning it with the base and pushing...

12
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. 
Take into consideration the size and position of your screen, the location of a suitable power 
outlet, as well as the location and distance between the projector and the rest of your 
equipment.
Your projector is designed to be installed in one of the following 4 possible installation 
locations:
1. Front Table
Select this location with the projector placed near...

13
Projection dimensions
The screen mentioned below refers to the projection screen usually consisting of a screen 
surface and a support structure.
PJD6350/PJD6352/PJD6351Ls/PJD6352Ls 
PJD6350/PJD6352
(a) 
Screen 
Size
[inch (m)]4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen
(b) Projection 
distance [m (inch)](c) Image 
height
[cm (inch)](d) Vertical 
offset
[cm (inch)] (b) Projection 
distance [m (inch)](c) Image 
height
[cm 
(inch)](d) Vertical 
offset
[cm (inch)]
min. max. min. max.
30(0.8) 0.9...