ViewSonic Projector PJD6350 User Manual

44
3. The info page displays the information and status of this projector.
4. After pressing the button “Contact IT Help”, the HELP DESK window will appear in 
the upper right corner of the screen. You will be able to deliver messages to 
RoomView™ software administrators/users who connect to the same local area 
network.
For more information, visit http://www.crestron.com & www.crestron.com/getroomview. 
**Crestron RoomView
On the “Edit Room” page, enter the IP Address (or hostname) as shown on the...

45
Active VGA Out
Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT 
sockets are correctly connected to devices. The projector outputs the signal received only 
from COMPUTER IN 1. 
Active Audio Out
Selecting On outputs an audio signal when the AUDIO IN 1 socket is correctly connected 
to a proper device.
LAN Control
Selecting On allows the projector to provide the network function when it is in standby 
mode. See Controlling the projector through a LAN environment on page 39 for...

46
Adjusting the Audio In 2 setting
1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings > Audio In 2 menu. 
2. Press  /  to decide the audio input source for the AUDIO IN 2/MIC port. This 
will affect the connection method for different devices, and where the sound is from.
• When Audio is selected:
The selected input signal determines which sound will be played by the projector speaker, and 
which sound will be output from the projector when AUDIO OUT is connected. For...

47
Shutting down the projector
1. Press Power and a confirmation message is 
displayed prompting you. 
If you dont respond in a few seconds, the 
message will disappear.
2. Press Power a second time.
3. Once the cooling process finishes, a Power 
Off Ring Tone will be heard. Disconnect the 
power cord from the wall socket if the 
projector will not be used in an extended 
period of time.
To turn off the ring tone, see Turning off the Power On/Off Ring Tone on page 46 for details.
CAUTION
• To protect the...

48
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
The menu items are available when the projector detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1. 
DISPLAY
Screen Color Off/Blackboard/Greenboard/Whiteboard
Aspect RatioAuto/4:3/16:9/16:10 (PJD6550Lw/
PJD6551Lws/PJD6552Lw/PJD6552Lws)/
Wide...

49
Main menu Sub-menu Options
3. SOURCE
Quick Auto Search Off/On
3D Settings3D SyncAuto/Off/Frame Sequential/
Frame Packing/Top-Bottom/
Side-by-Side
3D Sync Invert Disable/Invert
Standby 
SettingsActive VGA Out Off/On
Active Audio Out Off/On
LAN Control Off/On
Auto Power OnComputer Disable/Enable
CEC Disable/Enable
Direct Power On Off/On
Auto Power OffPower Saving Disable/10 min/20 min/30 min
Sleep TimerDisable/30 min/1 hr /2 hr/3 hr/
4 hr/8 hr/12 hr
Smart Restart Disable/Enable
Quick Power Off...

50
Main menu Sub-menu Options
4. 
SYSTEM 
SETTING: 
BASIC
AdvancedPattern Off/1/2/3
Message On/Off
Presentation TimerTimer Period
Timer Display
Timer Position
Timer Counting 
Direction
Sound Reminder
Start Counting/Off
5. 
SYSTEM 
SETTING: 
ADVANCED
High Altitude Mode On/Off
DCR On/Off
Audio SettingsAudio ModeStandard/Speech/
Entertainment
Mute On/Off
Audio Volume
Audio In 2 Audio/Microphone
Microphone Volume
Power On/Off Ring 
ToneOn/Off
Closed Caption Off/CC1/CC2/CC3/CC4
Lamp SettingsLamp...

51
Description of each menu
FunctionDescription
Screen ColorSee 
Using Screen Color on page 32  for details.This function is only available when a PC input signal is 
selected.
Aspect RatioSee Selecting the aspect ratio on page 30  for details.
Keystone See Correcting keystone on page 29  for details.
Corner Adj. See Adjusting 4 corners on page 29  for details.
Position Displays the position adjustment
 page. To move the projected 
image, use the directional arrow keys. The values shown on the 
lower...

52
Function Description
AdvancedColor
See Adjusting Color on page 33 for details.
Tint
See Adjusting Tint on page 33 for details.
The function is only available when Video or S-Video 
input with NTSC system is selected.
Sharpness
See Adjusting Sharpness on page 33 for details.
Gamma
See Selecting a gamma setting on page 33 for details.
Brilliant Color
See Adjusting Brilliant Color on page 33 for details.
Noise Reduction
See Reducing image noise on page 33 for details.
Color Management
See Color...

53
Function Description
Auto Power OffPower Saving
See Setting Power Saving on page 59 for details.
Sleep Timer
See Setting Sleep Timer on page 59 for details.
Smart RestartSelecting Enable enables you to restart the projector 
immediately within 120 seconds after turning it off. After 120 
seconds, if the projector is not turned on again, it will directly 
enter the standby mode.
It takes some time to initiate this function. Make sure 
the projector has been turned on for more than 4 
minutes. If the...