Home > ViewSonic > Projector > ViewSonic Projector PJ758 User Manual

ViewSonic Projector PJ758 User Manual

Here you can view all the pages of manual ViewSonic Projector PJ758 User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 61

ViewSonic
56PJ758/PJ759/PJ760
Troubleshooting
Regarding the indicator lamps
When operation of the LAMP, TEMP and POWER indicators differs from usual, 
check and cope with it according to the following table.
POWER 
indicatorLAMP 
indicatorTEMP 
indicatorDescription
Lighting
In 
Orange
Turned
offTurned
offThe projector is in a standby state.Please refer to the section “Power on/off”.
Blinking
In 
Green
Turned
offTurned
offThe projector is warming up.Please wait.
Lighting
In 
Green
Turned
offTurned
offThe...

Page 62

ViewSonic
57PJ758/PJ759/PJ760
Troubleshooting
Regarding the indicator lamps (continued)
POWER 
indicatorLAMP 
indicatorTEMP 
indicatorDescription
Blinking
In 
Red
or
Lighting
In 
Red
Turned
offLighting
In 
Red
There is a possibility that the interior portion 
has become heated.
Please turn the power off, and allow the projector to cool down at least 
20 minutes. After the projector has suffi ciently cooled down, please make 
confi rmation of the following items, and then turn the power on again.
• Is there...

Page 63

ViewSonic
58PJ758/PJ759/PJ760
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it 
according to the following table.
Phenomenon Cases not involving a machine defectReference
page
Power does not 
come on.
The electrical power cord is not plugged in.
Correctly connect the power cord.12
The main power source has been interrupted during 
operation such as by a power outage (blackout), etc.
Please disconnect...

Page 64

ViewSonic
59PJ758/PJ759/PJ760
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defectReference
page
No pictures are 
displayed.
(continued)
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu 
function.25, 26
The computer cannot detect the projector as a plug 
and play monitor.
Make sure that the computer can detect a plug and play 
monitor using another plug and play monitor.11
The...

Page 65

ViewSonic
60PJ758/PJ759/PJ760
Specifi cations
Specifi cationsSpecifi cations
Specifi cation
Item Specifi cation
Product name Liquid crystal projector
Liquid 
Crystal 
PanelPanel size 1.6 cm (0.63 type)
Drive system TFT active matrix
Pixels 786,432 pixels (1024 horizontal x 768 vertical)
LensZoom lens,

F=1.7 ~ 1.9
f = 18.9~ 22.6 mm
F=1.7 ~ 1.9
f = 19.5~ 23.4 mm
F=1.6 ~ 1.8
f = 18.9~ 22.6 mm
(approximately)
Lamp 220W UHB
Audio output 7 W
Power supply AC 100-120V/3.5A, AC220-240V/1.5A
Power consumption 320W...

Page 66

ViewSonic
61PJ758/PJ759/PJ760
Specifi cations




Specifi cations (continued)
[unit: mm] 

Page 67

ViewSonic62PJ758/PJ759/PJ760
Customer Support
For technical support or product service, see the table below or contact\
 your reseller.
Note : 
You will need the product serial number.
Country/Region Web Site T=Telephone
F=FaxE-mail
United States  www.viewsonic.com T= 800 688 6688
F= 909 468 [email protected]
Puerto Rico & Virgin Islands www.viewsonic.com T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= [email protected]
[email protected]
Canada...

Page 68

ViewSonic
63PJ758/PJ759/PJ760
Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and workmanship, under 
normal use, during the warranty period. If a product proves to be defective in material or 
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace 
the product with a like product. Replacement product or parts may include remanufactured or 
refurbished parts or components. 
How long...

Page 69

ViewSonic
64PJ758/PJ759/PJ760
Limitation of implied warranties: 
There are no warranties, express or implied, which extend beyond the description contained 
herein including the implied warranty of merchantability and fi tness for a particular purpose. 
Exclusion of damages: 
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic 
shall not be liable for: 
1.    Damage to other property caused by any defects in the product, damages based upon 
inconvenience, loss...

Page 70


				            
Start reading ViewSonic Projector PJ758 User Manual

Related Manuals for ViewSonic Projector PJ758 User Manual

All ViewSonic manuals