ViewSonic Projector PJ758 User Manual

ViewSonic
16PJ758/PJ759/PJ760
Selecting an input signal
1. Press INPUT button on the projector. 
Each time you press the button, the projector switches 
its input port as below.
          COMPUTER IN 1 
Æ   COMPUTER IN 2 
             VIDEO  Æ  S-VIDEO  Æ  COMPONENT (Y, Cb/Pb, Cr/Pr)
Operating
Adjusting the volume
1. Press VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the 
volume.
2. Use the ▲/▼ cursor buttons to adjust the volume.
To close the dialog and...

ViewSonic
17PJ758/PJ759/PJ760
Operating
Searching an input signal
1. Press SEARCH button on the remote control.
The projector will start to check its input ports in order to 
fi nd any input signals.
When an input is found, the projector will stop searching and 
display the image. If no signal is found, the projector will return to 
the state selected before the operation.
          COMPUTER IN 1 
Æ   COMPUTER IN 2 
             VIDEO  Æ  S-VIDEO  Æ  COMPONENT (Y, Cb/Pb, Cr/Pr)
Selecting an input signal...

ViewSonic
18PJ758/PJ759/PJ760
Adjusting the zoom and focus
1. Use the zoom ring to adjust the screen size. 
2. Use the focus ring to focus the picture.
Operating
Focus ringZoom ring
Adjusting the projectors elevator
When the place to put the projector is slightly uneven to the left or right, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project at 
a suitable angle to the screen, elevating the front side of the 
projector within 10...

ViewSonic
19PJ758/PJ759/PJ760
Adjusting the position
1. Press POSITION button on the remote control when no menu 
is indicated.
The “POSITION” indication will appear on the screen.
2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press RESET button on 
the remote control during the operation.
To complete this operation, press POSITION button again. Even 
if you do not do anything, the dialog will automatically disappear 
after a few seconds.
● When...

ViewSonic
20PJ758/PJ759/PJ760
Operating
Using the magnify feature
1. Press the ON button of MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and the 
projector will go into the MAGNIFY mode. The indication will 
disappear in several seconds with no operation.
2. Use the ▲/▼ cursor buttons to adjust the zoom level. 
To move the zoom area, press POSITION button in the MAGNIFY 
mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to 
fi nalize the zoom area,...

ViewSonic
21PJ758/PJ759/PJ760
Operating
Temporarily blanking the screen
1. Press BLANK button on the remote control. 
The blank screen will be displayed instead of the screen of 
input signal. Please refer to BLANK item in SCREEN menu 
(		36).
To exit from the blank screen and return to the input signal screen, 
press BLANK button again. 
● The projector automatically returns to the input signal screen 
when one of the projector’s buttons or the remote control buttons 
(except ASPECT, POSITION, MAGNIFY...

ViewSonic
22PJ758/PJ759/PJ760
1. Press the MENU button on the remote control or the projector. 
The Advanced Menu or EASY MENU, which has priority just after powered 
on will appear.
If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button. While the projector is displaying any menu, MENU button on 
the projector works as the cursor buttons.
In the EASY MENU
2. If you want to change it to the Advanced Menu, 
select the “Go to Advanced Menu...”
3. Use the ▲/▼...

ViewSonic
23PJ758/PJ759/PJ760
Using the menu function (continued)
In the Advanced Menu
2. Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU, select 
EASY MENU.
Then press the ► cursor button, or ENTER button to 
select an item. The lower layer menu of the selected item 
will appear.
3. Use the ▲/▼ cursor buttons to select an item to 
operate.
Then press the ► cursor button, or ENTER button to progress. The operation 
menu of the selected item will appear.
4. Use the...

ViewSonic
24PJ758/PJ759/PJ760
EASY MENU
EASY MENUEASY MENU
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio. 
See the ASPECT item in IMAGE menu
 (		29).
AUTO 
KEYSTONE 
EXECUTEUsing the ► button executes the auto keystone function. See AUTO  KEYSTONE  EXECUTE item in SETUP menu (		34).
KEYSTONE 
Using the ◄/► buttons corrects the vertical keystone distortion.
See KEYSTONE  item in SETUP menu (		34).
 PICTURE MODEUsing the ◄/► buttons switches the picture mode. 
The picture...

ViewSonic
25PJ758/PJ759/PJ760
EASY MENU
Item Description
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.
See BRIGHTNESS item in PICTURE menu
 (		26).
CONTRAST
Using the ◄/► buttons adjusts the contrast.
See CONTRAST item in PICTURE menu
 (		26).
COLORUsing the ◄/► buttons adjusts the strength of whole color.
See COLOR item in PICTURE menu
 (		26).
TINTUsing the ◄/► buttons adjusts the tint.
See TINT item in PICTURE menu
 (		26).
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
See SHARPNESS...