Home > ViewSonic > Projector > ViewSonic Projector PJ758 User Manual

ViewSonic Projector PJ758 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ViewSonic Projector PJ758 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ViewSonic
    ®
    PJ758/PJ759/PJ760
    LCD Projector- User Guide
    - Guide de l’utilisateur
    - Bedienungsanleitung
    - Guía del usuario
    - Guida dell’utente
    - Guia do usuário
    - Användarhandbok
    - Käyttöopas
    - Руководство пользователя
    - 使用手冊 (繁體)
    - 使用手冊 (簡體)
    - 사용자 안내서
    Model No. : VS11862/VS11861/VS11822 
    						
    							ViewSonic
    iPJ758/PJ759/PJ760
    Compliance Information
    FCC Statement
    This device complies with part 15 of FCC Rules. Operation is subject to the following two 
    conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
    any interference received, including interference that may cause undesired operation.
    This equipment has been tested and found to comply with the limits for a Class B digital device, 
    pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
    against harmful interference in a residential installation. This equipment generates, uses, and can 
    radiate radio frequency energy, and if not installed and used in accordance with the instructions, 
    may cause harmful interference to radio communications. However, there is no guarantee that 
    interference will not occur in a particular installation. If this equipment does cause harmful 
    interference to radio or television reception, which can be determined by turning the equipment 
    off and on, the user is encouraged to try to correct the interference by one or more of the 
    following measures:
        •  Reorient or relocate the receiving antenna.
        •  Increase the separation between the equipment and receiver.
        •   Connect the equipment into an outlet on a circuit different from that to which the receiver 
    is connected.
        •  Consult the dealer or an experienced radio/TV technician for help.
    Warning: You are cautioned that changes or modifi cations not expressly approved by the party 
    responsible for compliance could void your authority to operate the equipment.
    For Canada
        •  This Class B digital apparatus complies with Canadian ICES-003.
        •  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
    CE Conformity for European Countries
    The device complies with the requirements of the EEC directive 89/336/EEC as 
    amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic 
    compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”
    Following information is only for EU-member states:
    The mark shown to the right is in compliance with the Waste Electrical and Electronic 
    Equipment Directive 2002/96/EC (WEEE).
    The mark indicates the requirement NOT to dispose the equipment as unsorted municipal 
    waste, but use the return and collection systems according to local law.  
    						
    							ViewSonic
    iiPJ758/PJ759/PJ760
    Important Safety Instructions
    1.   Read these instructions.
    2.   Keep these instructions.
    3.   Heed all warnings.
    4.   Follow all instructions.
    5.   Do not use this unit near water.
    6.    Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for 
    further instructions.
    7.  
     Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s 
    instructions.
    8.    Do not install near any heat sources such as radiators, heat registers, stoves, or other 
    devices (including amplifi ers) that produce heat.
    9.    Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 
    has two blades with one wider than the other. A grounding type plug has two blades and a 
    third grounding prong. The wide blade and the third prong are provided for your safety. If 
    the provided plug does not fi t into your outlet, consult an electrician for replacement of the 
    obsolete outlet.
    10.    Protect the power cord from being walked on or pinched particularly at plugs. Convenience 
    receptacles and the point where they exit from the unit. Be sure that the power outlet is 
    located near the unit so that it is easily accessible.
    11.    Only use attachments/accessories specifi ed by the manufacturer.
    12.     Use only with the cart, stand, tripod, bracket, or table specifi ed by the 
    manufacturer, or sold with the unit. When a cart is used, use caution when 
    moving the cart/unit combination to avoid injury from tipping over.
    13.    Unplug this unit when unused for long periods of time.
    14.    Refer all servicing to qualifi ed service personnel. Servicing is required when the unit has 
    been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is 
    spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the 
    unit does not operate normally or has been dropped. 
    						
    							ViewSonic
    iiiPJ758/PJ759/PJ760
    Declaration of RoHS Compliance
    This product has been designed and manufactured in compliance with Directive 2002/95/EC of 
    the European Parliament and the Council on restriction of the use of certain hazardous substances 
    in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the 
    maximum concentration values issued by the European Technical Adaptation Committee (TAC) 
    as shown below: 
    SubstanceProposed Maximum 
    ConcentrationActual Concentration
    Lead (Pb) 0.1% < 0.1%
    Mercury (Hg) 0.1% < 0.1%
    Cadmium (Cd) 0.01% < 0.01%
    Hexavalent Chromium (Cr6+
    ) 0.1% < 0.1%
    Polybrominated biphenyls (PBB) 0.1% < 0.1%
    Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
    Certain components of products as stated above are exempted under the Annex of the RoHS 
    Directives as noted below:
    Examples of exempted components are:
    1.  Mercury in compact fl uorescent lamps not exceeding 5 mg per lamp and in other lamps not 
    specifi cally mentioned in the Annex of RoHS Directive.
    2.  Lead in glass of cathode ray tubes, electronic components, fl uorescent tubes, and electronic 
    ceramic parts (e.g. piezoelectronic devices).
    3.  Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or 
    more lead).
    4.  Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium 
    containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by 
    weight. 
    						
    							ViewSonic
    ivPJ758/PJ759/PJ760
    Copyright Information
    Copyright© ViewSonic© Corporation, 2007. All rights reserved.
    Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
    Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
    Corporation in the United States and other countries.
    ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks 
    of ViewSonic Corporation.
    VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC 
    are trademarks of VESA.
    PS/2,  VGA and XGA are registered trademarks of International Business Machines Corporation.
    Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or 
    omissions contained herein; nor for incidental or consequential damages resulting from furnishing 
    this material, or the performance or use of this product.
    In the interest of continuing product improvement, ViewSonic Corporation reserves the right to 
    change product specifi cations without notice. Information in this document may change without 
    notice.
    No part of this document may be copied, reproduced, or transmitted by any means, for any 
    purpose without prior written permission from ViewSonic Corporation.
    Product Registration
    To meet your future needs, and to receive any additional product information as it becomes 
    available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic® 
    Wizard CD-ROM also provides an opportunity for you to print the registration form, which you 
    may mail or fax to ViewSonic.
    For Your Records
    Product Name:
    Model Number:
    Document Number:
    Serial Number:
    Purchase Date:PJ758/PJ759/PJ760
    ViewSonic LCD Projector
    VS11862/VS11861/VS11822
    PJ758_PJ759_PJ760_UG_ENG Rev. 1A 03-29-07
    ________________________________________
    ________________________________________
    Personal Identification Number (PIN):
    The lamp in this product contains mercury.
    Please dispose of in accordance with local, state or federal laws. 
    						
    							ViewSonic
    1PJ758/PJ759/PJ760
    Projector
    PJ758/PJ759/PJ760
    Users Manual (detailed) 
    Operating Guide
    (1) Projector
    (2) Remote control
          with two AA batteries
    (3) Power cord
    (4) RGB cable
    (5) Audio/Video  cable
    (6) Soft case
    (7) Quick Start Guide
          and ViewSonic Wizard CD
    (8) Lens cover and Strap
    Thank you for purchasing this projector.
    WARNING  ►Before using this product, please read all manuals for this 
    product. Be sure to read “Safety Guide” fi rst. After reading them, store them in 
    a safe place for future reference.
    About this manualAbout this manual
    Various symbols are used in this manual. The meanings of these symbols are 
    described below. 
    WARNING  This symbol indicates information that, if ignored, could possibly 
    result in personal injury or even death due to incorrect handling.
    CAUTION  This symbol indicates information that, if ignored, could possibly 
    result in personal injury or physical damage due to incorrect 
    handling.
    		  Please refer to the pages written following this symbol.
      NOTE  • The information in this manual is subject to change without notice.
    • The manufacturer assumes no responsibility for any errors that may appear in this manual.
    • The reproduction, transfer or copy of all or any part of this document is not permitted 
    without express written consent.
    Trademark acknowledgment
    • Mac is registered trademarks of Apple Computer, Inc.
    • VESA and SVGA are trademarks of the Video Electronics Standard Association.
    • Windows is a registered trademark of Microsoft Corporation.
    All other trademarks are the properties of their respective owners.
    HOMEPAGE UPPAGE DOWNENDVIDEO
    RGBSEARCH
    FREEZEOFFONMAGNIFYASPECT AUTOBLANKMUTE VOLUMEKEYSTONEPOSITION
    ESCENTERMENU
    RESET
    (1) (2) (3)
    (6) (7) (8)(4) (5) 
    						
    							ViewSonic
    2PJ758/PJ759/PJ760
    About this manual . . . . . . . . . .  1
    Content . . . . . . . . . . . . . . . . . .  2
    Projector features . . . . . . . . . .  3
    Preparations . . . . . . . . . . . . . .  3
    Contents of package . . . . . . . . . . . . .3
    Fastening the lens cover . . . . . . . . . .3
    Part names  . . . . . . . . . . . . . . .  4
    Projector  . . . . . . . . . . . . . . . . . . . . . .4
    Control panel . . . . . . . . . . . . . . . . . . .5
    Rear panel . . . . . . . . . . . . . . . . . . . . .5
    Remote control  . . . . . . . . . . . . . . . . .6
    Setting up  . . . . . . . . . . . . . . . .  7
    Arrangement . . . . . . . . . . . . . . . . . . .7
    Connecting your devices . . . . . . . . .10
    Connecting power supply  . . . . . . . .12
    Using the security bar and slot  . . . .12
    Remote control . . . . . . . . . . .  13
    Putting batteries  . . . . . . . . . . . . . . .13
    About the remote control signal . . . .13
    Changing the frequency of remote 
    control signal . . . . . . . . . . . . . . . . .14
    Using as a 
    simple PC mouse & keyboard  . . .14
    Power on/off  . . . . . . . . . . . . .  15
    Turning on the power . . . . . . . . . . . .15
    Turning off the power . . . . . . . . . . . .15
    Operating  . . . . . . . . . . . . . . .  16
    Adjusting the volume . . . . . . . . . . . .16
    Temporarily muting the sound . . . . .16
    Selecting an input signal . . . . . . . . .16
    Searching an input signal  . . . . . . . .17
    Selecting an aspect ratio . . . . . . . . .17
    Adjusting the projectors elevator  . .18
    Adjusting the zoom and focus . . . . .18
    Using the automatic adjustment feature .  .19
    Adjusting the position  . . . . . . . . . . .19
    Correcting the keystone distortions .  .20
    Using the magnify feature . . . . . . . .20
    Freezing the screen . . . . . . . . . . . . .21
    Temporarily blanking the screen . . .21
    Using the menu function  . . . . . . . . .22
    Content
    ContentContent
    EASY MENU. . . . . . . . . . . . . .  24ASPECT, AUTO KEYSTONE  EXECUTE, 
    K
    EYSTONE , PICTURE MODE, BRIGHTNESS, 
    CONTRAST, COLOR, TINT, SHARPNESS, 
    WHISPER, MIRROR, RESET, FILTER TIME, 
    LANGUAGE, Go to Advanced Menu...
    PICTURE menu  . . . . . . . . . . .  26BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP, 
    COLOR, TINT, SHARPNESS, MY MEMORY
    IMAGE menu . . . . . . . . . . . . .  29ASPECT, OVER SCAN, V POSITION, H POSITION, 
    H PHASE, H SIZE, AUTO ADJUST EXECUTE
    INPUT menu  . . . . . . . . . . . . .  31PROGRESSIVE, VIDEO NR, COLOR SPACE, 
    COMPONENT, VIDEO FORMAT, 
    FRAME LOCK, COMPUTER IN, 
    RESOLUTION
    SETUP menu . . . . . . . . . . . . .  34AUTO KEYSTONE  EXECUTE, KEYSTONE , 
    WHISPER, MIRROR, VOLUME, SPEAKER, AUDIO
    SCREEN menu . . . . . . . . . . . .  36
    LANGUAGE, MENU POSITION, BLANK, 
    STA R T UP, MyScreen, MyScreen Lock, 
    M
    ESSAGE, SOURCE NAME
    OPTION menu . . . . . . . . . . . .  40
    AUTO SEARCH, AUTO KEYSTONE , 
    AUTO ON, AUTO OFF, LAMP TIME, 
    FILTER TIME, MY BUTTON, SERVICE, 
    SECURITY
    Maintenance . . . . . . . . . . . . .  51
    Lamp . . . . . . . . . . . . . . . . . . . . . . . .51
    Air fi lter  . . . . . . . . . . . . . . . . . . . . . .53
    Other care . . . . . . . . . . . . . . . . . . . .54
    Troubleshooting  . . . . . . . . . .  55
    Related messages . . . . . . . . . . . . . .55
    Regarding the indicator lamps . . . . .56
    Shutting the projector down . . . . . . .57
    Resetting all settings . . . . . . . . . . . .57
    Phenomena that may be easy 
    to be mistaken for machine defects .  .58
    Specifi cations . . . . . . . . . . . .  60
    				 
    						
    							
    ViewSonic3PJ758/PJ759/PJ760
    Fastening the lens cover
    To avoid losing the lens cover, please fasten the 
    lens cover to the projector using the enclosed strap.
    1. Fix the strap to the strap hole of the lens cover.
    Thread one end of the strap through the strap hole 
    of the lens cover and make the loop at the end, and 
    let the other end of the strap through the loop. Not 
    have a knot in the strap at either end.
    2. 
    Fix the strap to the strap hole of the projector.
    Thread the other end of the strap through the strap hole of the projecto\
    r and make 
    the loop there. Let the lens cover with the one end of strap though the \
    loop.
    Projector features / Preparations
    P ro je cto r fe atu re sProjector features
    This projector has a capability to project various picture signals onto \
    a screen. 
    This projector requires only a minimal amount of space for installation \
    and can 
    produce a large projected image from even a short distance.
    This projector boasts a variety of I/O port and low noise. These features provide 
    you with the broad use of this projector.
    P re para tio nsPreparations
    Contents of  package
    Please see the “Contents of package” in the “User’s Manual (concise)” which 
    is a book. Your projector should come with the items shown there. Contact 
    immediately your dealer if anything is missing.
    NOTE   • Keep the original packing materials, for future reshipment. Be su\
    re 
    to use the original packing materials when moving the projector. Use special  caution for the lens. 
    						
    							ViewSonic
    4PJ758/PJ759/PJ760
    Part names
    Part namesPart names
    Projector
    (1)  Lamp cover (		51)
    The lamp unit is inside.
    (2) Focus ring (
    		18)
    (3) Zoom ring (
    		18)
    (4) Control panel (
    		5)
    (5) Elevator buttons (x 2) (
    		18)
    (6) Elevator feet  (x 2) (
    		18)
    (7) Remote sensor (
    		13)
    (8) Lens (
    		18, 54)
    (9) Lens cover (
    		3)
    (10) Intake vents
    (11)  Filter cover (
    		53)
    The air fi lter and intake vent are 
    inside.
    (12) Speaker (
    		35)
    (13) Exhaust vent
    (14) AC inlet (
    		12)
    (15) Power switch (
    		15)
    (16) Rear panel (
    		5)
    (17) Security bar (
    		12)
    (18) Security slot (
    		12)
    WARNING  ►HOT! : Do not touch around the lamp cover and the exhaust 
    vents during use or just after use, since it is too hot.
    ►Do not look into the lens or vents while the lamp is on, since the strong light 
    is not good for your eyes. 
    ►Do not handle the elevator buttons without holding the projector, since the 
    projector may drop down.
    CAUTION  ►Maintain normal ventilation to prevent the projector from heating 
    up. Do not cover, block or plug up the vents. Do not place anything that can stick or 
    be sucked to the vents, around the intake vents. Clean the air fi lter periodically.
    HOT!(1) (2) (3) (4)
    (7)(10)
    (9)(8)(11)
    (6)(5)
    HOT!
    (13)
    (12)
    (6)
    (6)
    (6)
    (18)
    (16)
    (17)(15)(14)
    (4)
    (13)(1)(10)
    (11) 
    						
    							ViewSonic
    5PJ758/PJ759/PJ760
    Part names
    Control panel
    (1) STANDBY/ON button (		15)
    (2) INPUT button (
    		16, 22)
    (3)  MENU button (
    		22)
    It consists of four cursor buttons.
    (4) POWER indicator (
    		15, 56)
    (5) TEMP indicator (
    		56)
    (6) LAMP indicator (
    		56)
    Rear panel
    (1) AUDIO IN1 port (		10)
    (2) AUDIO IN2 port (
    		10)
    (3) AUDIO OUT port (
    		10)
    (4) COMPUTER IN1 port (
    		10)
    (5) COMPUTER IN2 port (
    		10)
    (6) MONITOR OUT port (
    		10)
    (7) Shutdown switch (
    		57)(8) CONTROL port (
    		10)
    (9) USB port (
    		10)
    (10)  COMPONENT
    (Y, Cb/Pb, Cr/Pr) port (
    		10)
    (11) VIDEO port (
    		10)
    (12) S-VIDEO port (
    		10)
    (13) AUDIO IN3 (L,R) ports (
    		10)
    CAUTION  ►Do not use the security bar and slot to prevent the projector 
    from falling down, since it is not designed for it.
    ►Use the shutdown switch only when the projector is not turned off by normal 
    procedure, since pushing this switch stops operation of the projector without 
    cooling it down.
    (1)
    (2)(3) (4) (7)(10)
    (9) (8) (11)(6) (5)
    (12) (13)
    (1) (2)(3) (4) (6)
    (5) 
    						
    All ViewSonic manuals Comments (0)

    Related Manuals for ViewSonic Projector PJ758 User Manual