ViewSonic Projector Pj358 User Manual

26ViewSonic	 PJ358
IMAGE Menu
IMAGE	Menu
ItemDescription
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio. For a PC signal or a signal from the USB STORAGENORMAL 	
ó	4:3	ó	16:9	ó	SMALL									
For a Video signal, s-video signal or component video signal
4:3	
ó 	16:9	ó	14:9	ó	SMALL					
For no signal4:3 (fixed)
•	 Ths	tem	can	be	selected	only	for	a	proper	sgnal.
•	 The	NORMAL 	mode	keeps	the	orgnal	aspect	rato	settng.
• 	
Perform ng	 the	automat...

27ViewSonic	 PJ358
IMAGE Menu
ItemDescription
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
Rght	ó	Left
• 	Th s 	tem 	can 	be 	selected 	only 	for 	a 	computer 	s gnal 	or 	component	
vdeo	sgnal.
H SIZE
Using the ▲/▼ buttons adjusts the horizontal size.
Large	
ó 	Small
•
	Ths	tem	can	be	selected	only	for	a	computer	sgnal.• 	When	ths	adjustment	s	excessve,	the	pcture	may	not	be	
dsplayed	correctly....

28ViewSonic	 PJ358
INPUT Menu
INPUT	Menu
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV	
ó 	FILM	ó	
TURN	OFF
• 	Ths	functon	s	performed	only	for	an	nterlaced	sgnal	of	a	vdeo,	
s-vdeo	or	component	vdeo	of	525	(480)	or	625	(576)	sgnal.
• 	When	 TV	or	FILM	s	selected,	the	screen	mage	wll	be	sharp.	
FILM	adapts	to	the	2-3	Pull-Down	converson	system.	But	these	
may	cause	a	certan	defect...

29ViewSonic	 PJ358
ItemDescription
VIDEO FORMATSet	the	vdeo	format	for	the	s-vdeo	port	and	vdeo	port.
(1) Use the ◄/► buttons to select the input port.
(2) Using the ▲/▼ buttons switches the mode 
for	vdeo	format.
AUTO		
ó 		NTSC		ó		PAL
		ó		SECAM	
						N-PAL 	
ó	M-PAL
	ó	NTSC4.43	
•
	Ths	tem	s	performed	only	for	a	vdeo	sgnal	
from	the	VIDEO	port	or	the	S-VIDEO	port.	
• 	The	 AUTO	mode	automatcally	selects	the	optmum	mode.
•	The	 AUTO...

30ViewSonic	 PJ358
INPUT Menu
ItemDescription
RESOLUTIONThe	resoluton	for	the	COMPUTER	IN1	and	COMPUTER	IN2	nput	
sgnals	can	be	set	on	ths	projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.
The	RESOLUTION	menu	wll	be	dsplayed.
(2)		In	the	RESOLUTION	menu,	select	the	
resolution you wish to display using the ▲/▼ 
buttons.	
Selectng	
AUTO	wll	set	a	resoluton	
approprate	to	the	nput	sgnal.
(3)...

31ViewSonic	 PJ358
SETUP Menu
SETUP	Menu
ItemDescription
AUTO 
KEYSTONE EXECUTE Selectng	ths	tem	performs	the	automatc	keystone	dstorton	
correcton.	Projector	automatcally	corrects	vertcal	keystone	
dstorton	due	to	the	(forward/backward)	setup	angle	by	tself.
Th
s 	funct on 	w ll 	be 	executed 	only 	once 	when 	selected 	n 	the 	menu.	
When	the	slant	of	the	projector	s	changed,	execute	ths	functon...

32ViewSonic	 PJ358
SETUP Menu
SETUP Menu (continued)
ItemDescription
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.NORMAL 	
ó	WHISPER
•	
When	the	WHISPER	s	selected,	acoustc	nose	and	screen	
brghtness	are	reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL 	ó	H:INVERT
	ó	V:INVERT
	ó	H&V:INVERT	
If	the	
Transton	Detector 	s	TURN	ON	and	MIRROR	status	s	
changed,	 Transton	Detector 	Alarm	wll	be	dsplayed...

33ViewSonic	 PJ358
SCREEN Menu
SCREEN	Menu
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
SUOMI	ó	POLSKI	ó	TÜRKÇE
ENGLISH	ó	FRANÇAIS	ó	DEUTSCH	ó	ESPAÑOL	ó	ITALIANO
NORSK	ó	NEDERLANDS	ó	PORTUGUÊS	ó	日本語
				ó				ó								ó	SVENSKA	ó
MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.
To	qut	the	operaton,	press	the	MENU	button	on	the	remote	control	
or	keep	no	operaton	for	about	10	seconds.
BLANK
Using the ▲/▼ buttons switches the...

34ViewSonic	 PJ358
SCREEN Menu
ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The	start-up	screen	s	a	screen	dsplayed	when	no	sgnal	or	an	
unsutable	sgnal	s	detected.MyScreen	
ó 	ORIGINAL
	ó	
TURN	OFF				
Feature
MyScreen Screen	can	be	regstered	by	the	MyScreen	tem.
ORIGINALScreen	preset	as	the	standard	screen.
TURN	OFF Plan	black	screen.
•	To	avod	remanng	as	an	aftermage,	the	MyScreen	or	ORIGINAL...

35ViewSonic	 PJ358
SCREEN Menu
ItemDescription
MyScreenThs	tem	allows	you	to	capture	an	mage	for	use	as	a	MyScreen	
mage	whch	can	be	used	as	the	BLANK	screen	and	START
	UP	
screen.	Dsplay	the	mage	you	want	to	capture	before	executng	the	
followng	procedure.
1.		 Selectng	ths	tem	dsplays	a	dalog	
ttled	“MyScreen”.	It	wll	ask	you	f	
you	start	capturng	an	mage	from	the	
current	screen.
Please	wat	for	the...