ViewSonic Pro10100 Projector User Manual
Here you can view all the pages of manual ViewSonic Pro10100 Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
40
SCREEN | PIP / POP
Screen
` Single Screen: Projection single window.
`
PIP Screen: Main source is at large window; PIP source is at small
window and displays in the corner of the main window.
`
POP Screen: Main source is at the left window and POP source is at the \
right widow, they are equal sizes and side by side.
PIP Location
Choose the PIP screen position on the display screen.
PIP Size
Choose the PIP size from 1/16, 1/25 or 1/36 on the display screen.
PIP / POP Source
Choose the source...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-40.png "Page 41
40
SCREEN | PIP / POP
Screen
` Single Screen: Projection single window.
`
PIP Screen: Main source is at large window; PIP source is at small
window and displays in the corner of the main window.
`
POP Screen: Main source is at the left window and POP source is at the \
right widow, they are equal sizes and side by side.
PIP Location
Choose the PIP screen position on the display screen.
PIP Size
Choose the PIP size from 1/16, 1/25 or 1/36 on the display screen.
PIP / POP Source
Choose the source...")
40 SCREEN | PIP / POP Screen ` Single Screen: Projection single window. ` PIP Screen: Main source is at large window; PIP source is at small window and displays in the corner of the main window. ` POP Screen: Main source is at the left window and POP source is at the \ right widow, they are equal sizes and side by side. PIP Location Choose the PIP screen position on the display screen. PIP Size Choose the PIP size from 1/16, 1/25 or 1/36 on the display screen. PIP / POP Source Choose the source...
Page 42
![Page 42
41
SETTING
Language
Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use
the ▲ or ▼ to select your preferred language. Press “Enter” to finalize the selection.
Projection
` Front-Desktop
This is the default selection. The image is projected straight on t\
he screen.
`
Rear-Desktop
When selected, the image will appear reversed.
`
Front-Ceiling
When selected, the image will turn upside down.
`
Rear-Ceiling
When selected, the image will appear...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-41.png "Page 42
41
SETTING
Language
Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use
the ▲ or ▼ to select your preferred language. Press “Enter” to finalize the selection.
Projection
` Front-Desktop
This is the default selection. The image is projected straight on t\
he screen.
`
Rear-Desktop
When selected, the image will appear reversed.
`
Front-Ceiling
When selected, the image will turn upside down.
`
Rear-Ceiling
When selected, the image will appear...")
41
SETTING
Language
Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use
the ▲ or ▼ to select your preferred language. Press “Enter” to finalize the selection.
Projection
` Front-Desktop
This is the default selection. The image is projected straight on t\
he screen.
`
Rear-Desktop
When selected, the image will appear reversed.
`
Front-Ceiling
When selected, the image will turn upside down.
`
Rear-Ceiling
When selected, the image will appear...
Page 43
42 Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Menu Location Choose the menu location on the display screen. SETTING | Lens Function Focus Adjust focus function on the projected image. Zoom Adjust zoom function on the projected image. Lens Shift Shift the projected image. ` Lock: This function can not be used by user. ` Unlock: This function can be used by user. Lens Calibration Perform calibration and return lens to the center position.
Page 44
![Page 44
43
SETTING | Security
Security Timer
Use this function to set the how long (Month/Day/Hour) the projector c\
an be used.
Once this time has elapsed you will be requested to enter your password \
again.
Change Password
` First time:
1. Press “
” to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new password and then
press “
” key to confirm your password.
` Change Password:
1. Press “
” to input old password.
2. Use number button to enter...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-43.png "Page 44
43
SETTING | Security
Security Timer
Use this function to set the how long (Month/Day/Hour) the projector c\
an be used.
Once this time has elapsed you will be requested to enter your password \
again.
Change Password
` First time:
1. Press “
” to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new password and then
press “
” key to confirm your password.
` Change Password:
1. Press “
” to input old password.
2. Use number button to enter...")
43 SETTING | Security Security Timer Use this function to set the how long (Month/Day/Hour) the projector c\ an be used. Once this time has elapsed you will be requested to enter your password \ again. Change Password ` First time: 1. Press “ ” to set the password. 2. The password has to be 4 digits. 3. Use number button on the remote to enter your new password and then press “ ” key to confirm your password. ` Change Password: 1. Press “ ” to input old password. 2. Use number button to enter...
Page 45
![Page 45
44
Security
` On: Choose “On” to use security verification when turning on projector.
` Off: Choose “Off” to be able to switch on the projector without pa\
ssword
verification.
SETTING | Signal (RGB)
Signal is supported except Video and S-Video.
Frequency
Change the display data frequency to match the frequency of your compute\
r’s
graphic card. Use this function only if the image appears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card. If t\
he...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-44.png "Page 45
44
Security
` On: Choose “On” to use security verification when turning on projector.
` Off: Choose “Off” to be able to switch on the projector without pa\
ssword
verification.
SETTING | Signal (RGB)
Signal is supported except Video and S-Video.
Frequency
Change the display data frequency to match the frequency of your compute\
r’s
graphic card. Use this function only if the image appears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card. If t\
he...")
44 Security ` On: Choose “On” to use security verification when turning on projector. ` Off: Choose “Off” to be able to switch on the projector without pa\ ssword verification. SETTING | Signal (RGB) Signal is supported except Video and S-Video. Frequency Change the display data frequency to match the frequency of your compute\ r’s graphic card. Use this function only if the image appears to flicker vertically. Phase Synchronize the signal timing of the display with the graphic card. If t\ he...
Page 46
45 SETTING | Signal (Video) “Signal” is only supported when the source is Video or S-video. White Level Allow user adjust White Level when inputting S-Video or Video signals. Black Level Allow user adjust Black Level when inputting S-Video or Video signals. Saturation Adjust a video image from black and white to fully saturated color. ` Press the ◄ to decrease the amount of saturation in the image. ` Press the ► to increase the amount of saturation in the image. IRE Adjust measurement of...
Page 47
![Page 47
46
SETTING | Audio Settings
Internal Speaker
Choose the “On” or “Off” to turn on or off the internal spea\
ker.
Mute
` Choose the “On” to turn mute on.
` Choo
se the “Off” to turn mute off.
Volume
` Press the ◄ to decrease the volume.
` Press the ► to increase the volume.](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-46.png "Page 47
46
SETTING | Audio Settings
Internal Speaker
Choose the “On” or “Off” to turn on or off the internal spea\
ker.
Mute
` Choose the “On” to turn mute on.
` Choo
se the “Off” to turn mute off.
Volume
` Press the ◄ to decrease the volume.
` Press the ► to increase the volume.")
46 SETTING | Audio Settings Internal Speaker Choose the “On” or “Off” to turn on or off the internal spea\ ker. Mute ` Choose the “On” to turn mute on. ` Choo se the “Off” to turn mute off. Volume ` Press the ◄ to decrease the volume. ` Press the ► to increase the volume.
Page 48
![Page 48
47
SETTING | Advanced
Logo
Use this function to set the desired startup screen. If changes are made\
they will
take effect the next time the projector is powered on.
` Viewsonic: The default startup screen.
` Neutral: Logo is not displayed on startup screen.
` User: Use stored picture from “Logo Capture” function.
Logo Capture
Press to capture an image of the picture currently displayed on screen.
Closed Captioning
If changes are made they will take effect the next time the projector is\
powered...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-47.png "Page 48
47
SETTING | Advanced
Logo
Use this function to set the desired startup screen. If changes are made\
they will
take effect the next time the projector is powered on.
` Viewsonic: The default startup screen.
` Neutral: Logo is not displayed on startup screen.
` User: Use stored picture from “Logo Capture” function.
Logo Capture
Press to capture an image of the picture currently displayed on screen.
Closed Captioning
If changes are made they will take effect the next time the projector is\
powered...")
47 SETTING | Advanced Logo Use this function to set the desired startup screen. If changes are made\ they will take effect the next time the projector is powered on. ` Viewsonic: The default startup screen. ` Neutral: Logo is not displayed on startup screen. ` User: Use stored picture from “Logo Capture” function. Logo Capture Press to capture an image of the picture currently displayed on screen. Closed Captioning If changes are made they will take effect the next time the projector is\ powered...
Page 49
![Page 49
48
SETTING | Network
Network State
Display the network connection status.
DHCP
Use this function to select your desired startup screen. If you change t\
he setting
from one to another, when you exit the OSD menu, the new setting will ta\
ke effect
on next open.
` On: Assign an IP address to the projector from an external DHCP server
automatically.
When making a connection in the local area network.
1. Connect the computer and the projector to your network.
2. Press the ‘menu’ key in the remote...](http://img.usermanuals.tech/thumb/80/97292/w300_viewsonic-pro10100-manual_d-48.png "Page 49
48
SETTING | Network
Network State
Display the network connection status.
DHCP
Use this function to select your desired startup screen. If you change t\
he setting
from one to another, when you exit the OSD menu, the new setting will ta\
ke effect
on next open.
` On: Assign an IP address to the projector from an external DHCP server
automatically.
When making a connection in the local area network.
1. Connect the computer and the projector to your network.
2. Press the ‘menu’ key in the remote...")
48 SETTING | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change t\ he setting from one to another, when you exit the OSD menu, the new setting will ta\ ke effect on next open. ` On: Assign an IP address to the projector from an external DHCP server automatically. When making a connection in the local area network. 1. Connect the computer and the projector to your network. 2. Press the ‘menu’ key in the remote...
Page 50
49 Gateway Select the default gateway of the network connected to the projector. DNS Select DNS number. Apply Press “” and then choose “Yes” to apply the selection. All of the new settings of the non-DHCP mode shall be triggered by “Yes”. Control System IP Address Select an IP address for Crestron Control System. Control System IP ID Select an IP ID for Crestron Control System. Control System Port Select a connection port for Crestron Control System.