ViewSonic Pro10100 Projector User Manual

Pro10 Series
Professional DLP
® Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing 
and using your product in a safe manner, as well as registering your product for 
future service. Warranty information contained in this User Guide will describe your 
limited coverage from ViewSonic Corporation, which is also found on our web site at  
http://www.viewsonic.com in English, or in specific languages using the Regional 
selection box in the upper right...

i
FCC Statement
This equipment has been tested and found to comply with the limits for a\
 Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated i\
n a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction manual\
, may cause harmful 
interference to radio...

ii
Important Safety Instructions
1. Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this unit near water.
6.  Clean with a soft, dry cloth.
7.  Do not block any ventilation openings. Install the unit in accordance wi\
th the   
manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, \
stoves, or other 
devices (including amplifiers) that produce heat.
9.  Do not defeat the safety...

iii
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Direc\
tive 2011/65/
EU of the European Parliament and the Council on restriction of the use \
of certain hazard-
ous substances in electrical and electronic equipment (RoHS2 Directive)\
 and is deemed to 
comply with the maximum concentration values issued by the European Technical Adapta-
tion Committee (TAC) as shown below:
SubstanceProposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1%<...

iv
Copyright Information
Copyright © ViewSonic®
 Corporation, 2013. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks 
of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS...

v
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this \
projector. Please 
confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord 
is used. If the supplied AC Power Cord does not match your AC outlet, please contact your 
sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure 
that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We 
highly...

vi
Please follow all warnings, precautions and maintenance as 
recommended in this user’s guide.
▀■ Warning-Do not look into the projector’s lens when the lamp is on. The 
bright light may hurt your eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do not expose this 
projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the projector as this may 
cause electric shock.
▀■ Warning-When replacing the lamp, please allow the unit to cool down. 
Follow instructions as...

vii
Do:
 
y Turn off and unplug the power plug from the AC outlet before cleaning the 
product.
 
y Use a soft dry cloth with mild detergent to clean the display housing.
 
y Disconnect the power plug from AC outlet if the product is not being used for a 
long period of time.
Do not:
 
y Block the slots and openings on the unit provided for ventilation.
 
y Use abrasive cleaners, waxes or solvents to clean the unit.
 
y Use under the following conditions:
 
- In extremely hot, cold or humid...

8
SCREEN | PIP / POP .......................40
SETTING  ......................................... 41
SETTING | Lens Function ................ 42
SETTING | Security  .........................43
SETTING | Signal (RGB)  .................44
SETTING | Signal (Video)  ................45
SETTING | Audio Settings  ...............46
SETTING  | Advanced  ....................... 47
SETTING | Network  .........................48
SETTING | Image Blending ............. 52
OPTIONS...

9
 
` XGA (1024x768) / WXGA(1280x800), support resolution: Up to WUXGA 
@60Hz (Reduced Blanking) and UXGA @60Hz
 
` Single lamp system
 
` Power Zoom/Focus
 
` Power lens shift
 
` Dynamic Aperture
 
` 10W x 1 speaker
 
` Filter module
 
` Support PIP/POP function
 
` Support network management for remote control and monitoring
Introduction
Product Features