ViewSonic Cd4220 Users Guide
Here you can view all the pages of manual ViewSonic Cd4220 Users Guide. The ViewSonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 41
ViewSonicCD4220 39 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/RegionWebsite T = Telephone F = FAXEmail Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 [email protected] Canada www.viewsonic.com T= 1-866-463-4775 F= [email protected] Europe/Middle East/ Baltic countries/North Africa www.viewsoniceurope.com Contact your reseller Hong...
Page 42
ViewSonicCD4220 40 Limited Warranty VIEWSONIC® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a pr oduct proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement pr oduct or parts may include remanufactured or refurbished parts or components. How long the...
Page 43
ViewSonicCD4220 41 Exclusion of damages: ViewSonics liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any def ects in the product, damages based upon incon- venience, loss of use of the product, loss of time, loss of profits, loss of business opportu- nity, loss of goodwill, interference with busine ss relationships, or other commercial loss, even if advised of the pos sibility of such damages. 2. Any...
Page 44
ViewSonicCD4220 42 Mexico Limited Warranty VIEWSONIC® DISPLAY PRODUCTS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defectiv e in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or re place the product with a like produc t. Replacement product or parts may include remanufactured or refurbis hed parts or components &...
Page 45
ViewSonicCD4220 43 4.3: ViewSonic Mexico Limited Warranty Page 2 of 2LCD_LW03 Rev. 1a 06-11-07 Contact Information for Sales & Au thorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004...
Page 46
![Page 46
CD4620/CD4220 RS232 protocol
Table of Content
1 Introduction........................................................................\
............................... 45
2 Descrip tion....................................................................\
..................................... 45
2.1 Hardware sp ecification ........................................................................\
............................. ....... 45
2.2 Communica tion...](http://img.usermanuals.tech/thumb/80/54807/w300_viewsonic_cd4220-user-s-guide-45.png "Page 46
CD4620/CD4220 RS232 protocol
Table of Content
1 Introduction........................................................................\
............................... 45
2 Descrip tion....................................................................\
..................................... 45
2.1 Hardware sp ecification ........................................................................\
............................. ....... 45
2.2 Communica tion...")
CD4620/CD4220 RS232 protocol Table of Content 1 Introduction........................................................................\ ............................... 45 2 Descrip tion....................................................................\ ..................................... 45 2.1 Hardware sp ecification ........................................................................\ ............................. ....... 45 2.2 Communica tion...
Page 47
3. Introduction This document describes the hardware interface spec and software protocols of RS232 interface communication between Viewsonic Commercial Display and PC or other control unit with RS232 protocol. Viewsonic CD4620 and CD4220 contain with 2 set of protocol command 1. Protocol 1, with ID This set protocol allow user to assign the ID in the command to control the specify ID monitor 2. Protocol 2, without ID The set protocol is best for single display control and for Viewsonic...
Page 48
![Page 48
5. Protocol 1 : with ID
5.1 Command Description
Length: Total Byte of Message excluding “CR”
TV ID Identification for each of TV
Command Type Identify command type,
“s” (0x73h) : Set Command
“g” (0x67h) : Get Command
“r” (0x72h) : Reply Command
“p” (0x70h) : RCU Pass-through
“+” (0x2Bh) : Valid command Reply
“-“ (0x2Dh) : Invalid command Reply
Command: Function command code: One byte ASCII code
Value[1~3]: Three bytes ASCII that defines the value
CR 0x0D
5.2 Set-Function Listing...](http://img.usermanuals.tech/thumb/80/54807/w300_viewsonic_cd4220-user-s-guide-47.png "Page 48
5. Protocol 1 : with ID
5.1 Command Description
Length: Total Byte of Message excluding “CR”
TV ID Identification for each of TV
Command Type Identify command type,
“s” (0x73h) : Set Command
“g” (0x67h) : Get Command
“r” (0x72h) : Reply Command
“p” (0x70h) : RCU Pass-through
“+” (0x2Bh) : Valid command Reply
“-“ (0x2Dh) : Invalid command Reply
Command: Function command code: One byte ASCII code
Value[1~3]: Three bytes ASCII that defines the value
CR 0x0D
5.2 Set-Function Listing...")
5. Protocol 1 : with ID 5.1 Command Description Length: Total Byte of Message excluding “CR” TV ID Identification for each of TV Command Type Identify command type, “s” (0x73h) : Set Command “g” (0x67h) : Get Command “r” (0x72h) : Reply Command “p” (0x70h) : RCU Pass-through “+” (0x2Bh) : Valid command Reply “-“ (0x2Dh) : Invalid command Reply Command: Function command code: One byte ASCII code Value[1~3]: Three bytes ASCII that defines the value CR 0x0D 5.2 Set-Function Listing...
Page 49
Hex 0x38 0x30 0x32 0x73 0x24 0x31 0x37 0x36 0x0D Reply (Hex Format) Name Length ID Command Type CR Hex 0x34 0x30 0x32 0x2D 0x0D Example3: Set Tint as 32 for TV-03 and this command is valid Send (Hex Format) Name Length ID Command Type CommandValue1 Value2 Value3 CR Hex 0x38 0x30 0x33 0x73 0x27 0x30 0x33 0x32 0x0D Reply (Hex Format) Name Length ID Command Type CR Hex 0x34 0x30 0x33 0x2B 0x0D Example4: Set Tint as 75 for TV-03 and this command is NOT valid Send (Hex Format)...
Page 50
Chinese 006 : Russian OSD timeout 8 s 3 33 005 ~120 Sec Set OSD timeout Volume 8 s 5 35 000 ~ 100 000: OFF Mute 8 s 6 36 001: ON (mute) 000: OFF Off Timer 8 s 7 37 001~024 (hour) 000 : OFF 001: PIP 002: POP 003 : PBP PIP Mode 8 s 9 39 004 : PBPA 000: Main PIP Sound select 8 s : 3A 001: PIP 000: Up 001: Down 002: Left PIP position 8 s ; 3B 003: Right 000 : VGA 001 : HDMI1 002 : HDMI2 003 : AV 004 : YPbPr PIP Input...