Vidicode Call Recorder Manual

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  71
10  The Call Recorder as a Normal Recorder 
The Call Recorder can be used as an audio-recorder at any time, with the 
same high capacity it has when recording telephone calls. If you are 
conducting a normal conversation, for instance, and the headset is on the 
rest, just press the recording button, and the conversation will be recorded. 
Note: The Call Recorder cannot operate as a telephone or call recorder while it is recording through the...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  72  pressing the appropriate softkeys. The recorder will give you 60 seconds to 
decide this in; if you do not, the recording will automatically be stored.   
Searchcode: _______
STORE 55 DELETE
If the Play key is pressed in this situation, the recording can first be listened 
to, and deleted or stored later. 
On a hard disk model deleted  recordings  can still be retrieved by pressing 
the Play key first, followed by 
, and then be stored after...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  73
11  The Network Interface  
Every Call Recorder has been provided with a 10BaseT Ethernet interface. 
This type of interface is the most common one for local area networks and 
connection to the Internet. 
The protocol chosen for communication via the Network is TCP/IP, the 
Internet protocol that can be used on most local area networks. 
11.1 The possibilities 
The main reason for developing the network interface is to offer the possibility...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  74  •  Connecting a PC with various recorders in the same building is possible 
by connecting all recorders and the PC onto the local network. 
•  A good example of a simple solution to get access to a number of 
recorders on a distant location is to work with an ISDN router with hub, 
as provided by several manufacturers such as Cisco or Intel. The 
recorders are connected to a hub, and a PC with our archive software is 
connected to the hub via...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  75
FTP ID: 0000
NEXT CHANGE BACK
This is the ID a user should give to approach a Call Recorder via FTP. There 
is only one possible ID. 
FTP code: XXXXXXXX
NEXT CHANGE BACK
The access code for an FTP session. The default setting is 0000.  
The next question concerns a property of your network: 
Use DHCP Server Yes
NEXT CHANGE BACK
If there is a DHCP, server, the recorder will automatically be assigned an IP 
address (network address), in which...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  76  If there is an IP subnet mask, there will be a gateway to the other network as 
well, and the address of this gateway will be filled in. This should also be 
done if there is a DHCP server. 
Gateway: 0.0.0.0
NEXT CHANGE BACK
If the gateway is not applicable in your situation, you do not change anything.  
If DHCP is used, the address mentioned here has come  from the DHCP 
server and  the name found in the next question will be used : 
IP...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  77
Monitor code: XXXXXXXX
NEXT CHANGE BACK
11.3  Use of the network interface 
The network functions are important for applications that use the network for 
communicating with the recorder, such as the Call Recorder Archive Software 
and the Call Recorder Monitor Software. 
11.3.1  The FTP protocol  
FTP is the standard method to ask for files via the Internet, which explains 
why there is a lot of software that can retrieve the files of your...

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  78    

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  79
12  The Crypto Card option 
The Crypto Card is, along with the Archive Software, the most important 
option of the Call Recorder. Every Call Recorder has been provided with an 
IC card reader. If a set of Crypto Cards is purchased, the recorder will 
automatically be able to work with them. 
12.1  How a Crypto Card works 
The Crypto Card works as follows: 
•  All recordings that are made while the Crypto Card is inside the computer 
are coded....

Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV  80  This method of protection is similar to the protection of telebanking via 
Internet and the risk that this form of protection is broken is very low.  
12.2  Changing the card code 
The card code (PIN code of the Crypto Card) is only used when playing 
recordings made with the Crypto Card. Select the option “Changing the Card 
Code” from the settings menu. The recorder will first ask for your present card 
code: 
Card code: XXXX
CONTINUE STOP...