US Robotics Wireless MAXg ADSL Gateway User Manual

1
Wireless MAXg ADSL Gateway
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida all'installazione rapida
Guía breve de instalación
Beknopte installatiegids
Kurulum Kõlavuzu
R24.0547.00
rev 1.6 07/06 

Wireless MAXg ADSL Gateway Installation .............................. 3
Installation de la passerelle Wireless MAXg ADSL Gateway  ... 19
Installation des Wireless MAXg ADSL Gateways ...................... 35
Installazione di Wireless MAXg ADSL Gateway  ........................ 51
Instalación de Wireless MAXg ADSL Gateway  .......................... 67
Installatie van de Wireless MAXg ADSL Gateway  ..................... 83
Wireless MAXg ADSL Gateway Kurulumu  ................................. 99 

3
Wireless MAXg ADSL Gateway Installation
Thank you for purchasing the U.S. Robotics Wireless MAXg ADSL Gateway. 
For current product support and contact information, go to the following Web site:
http://www.usr.com/support
NOTE: It is important that you have your serial number written down for future 
reference. If you ever need to call our technical support department, you will 
need this number to receive assistance. You can find your 12-character serial 
number on a bar code sticker located on the...

4a microfilter on the cable that connects your ADSL gateway to the telephone jack unless 
your microfilter has a connection for both the gateway and the phone.
Step 2. Connect the Antenna and Cables
To configure the gateway, you will initially use the supplied yellow Ethernet cable to 
connect it to the computer. You can set up a wireless connection later in the installation 
process, once the gateway is communicating with the Internet.
This diagram shows you how the devices will be connected when the...

5 D. Plug the AC power adapter into the 9VDC jack on the back of your gateway. Then 
plug the AC power adapter into a standard wall outlet. If the   LED on the front 
panel is not lighted, press the Power switch on the back of the gateway.    
The gateway starts up after you turn on the power. This may take one to two 
minutes.
E. See if the   and any of the   indicator LEDs are lighted. If they are not, see the 
troubleshooting section later in this guide.
Step 3. Install EasyConfigurator
1. Insert the...

6
Step 4. Configure the Gateway with EasyConfigurator
1. This is the EasyConfigurator login window:
If EasyConfigurator does not start up automatically, you can open it yourself. 
Windows users: Click Start and select Programs and U.S. Robotics 
EasyConfigurator. 
Macintosh and Linux users: Double-click on the EasyConfigurator icon on the 
desktop.
The user name and password are already entered for you. Click Log In and wait a few 
moments.  

7 2. This window appears after you log in:
Select your country and your Internet Service Provider (ISP) from the drop-down 
lists. If your country or ISP does not appear in the list, select Other and manually 
enter the settings provided by your ISP.
You may need to enter your ISP-supplied user name and password after making your 
selections. Click Apply to continue. 
3. EasyConfigurator now configures your gateway based on your ISP selection or 
manually-entered settings.  

8At this point, the system attempts to access the Internet. This may take a few 
minutes, until the following status page appears. 
If the status is CONNECTED TO THE INTERNET, you have successfully configured 
your Internet connection. If it does not say CONNECTED TO THE INTERNET, go to the 
Troubleshooting section of this installation guide. 
Step 5. Set Up the Wireless Configuration 
In wireless communications, devices communicate with each other via radio waves rather 
than cables. The gateway can...