Uniden Receiver Bearcat BC235XLT Operating Instructions

User Defined Fleet Maps
Type I Programming Information
When a Type I system is designed, the address
information for all the IDs is divided into 8 equal sized
blocks, numbered 0–7. When you program your scanner to
track a Type I system, you must select a size code for
each of these blocks. When you have assigned a size
code to all 8 blocks, you’ll have defined the Fleet Map for
the system you’re tracking. Each size code determines the
number of Fleets, Subfleets, and IDs each block will have.
For...

If you don’t already know the size codes used, you’ll have
to guess at them. But since you don’t have to figure out all
the blocks at once, this isn’t as hard as it seems. Select a
size code for a block, and then press
R. Now listen to the
communications. If you decide you are receiving most of
the replies to the conversations with IDs assigned to the
block you just programmed, then you’ve probably selected
the right size code and can work on the next block of the
map.
Finally, for most public safety...

Size Code Restrictions
If you select size code S-12, S-13, or S-14, there are some
restrictions as to which blocks can be used for these codes.
S-12 can only be assigned to Blocks 0, 2, 4, or 6.
S-13 can only be assigned to Blocks 0 and 4.
S-14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you will be
prompted for the next available block when programming a
Fleet Map. For example, if you assign Block 0 as an S-12,
you will be prompted for b2, the next block available,...

Precautions
Before you use this scanner, please read and observe
the following:
EARPHONE WARNING!
Be sure to use only the recommended optional
monaural earphone (EP009). You may also use a 32W
stereo headset. Use of an incorrect earphone or stereo
headset may be potentially hazardous to your hearing.
The output of the phone jack is monaural, but you will
hear it in both headphones of a stereo headset.
Set the volume to a comfortable audio level coming
from the speaker before plugging in the monaural...

Front View
888.8888888BATT
1     2     3     4     5     6     7     8 9 10BANK
TRUNK
DATA POLICE   FIRE/EMG AIR MRN W X
SCAN SRCH PRI HOLD DLY L /O
2
3
4
5
6
7
8
9
1011
12 1
13
14
15
16
17
18
1. DC Power Jack 10. LightK/ Lock Key
2. Scan Key
S11. Speaker
3. Manual Key
M12. Display
4. Trunking Key
T13. Keypad
5. Decimal Key
.14. Enter KeyE
6. Service KeyC15. Search KeyR
7. Limit KeyL/
Down Key
(
16. Hold KeyH/
Up Key
)
8. Priority KeyP/
Turbo Key17. Lockout KeyO
9. Delay KeyY18. Data KeyD 

Top View and Display
19 20 21 22
19. Antenna Connector
20. Earphone Jack
21. Squelch Control
22. On/Off Volume Control
BATT
23 24
30
29
28 27
888.8888888
12345678 910BANK
TRUNK
DATA POLICE FIRE/EMG AIR MRN W X
SCAN SRCH PRI HOLD DLY L /O25
26
23. Channel Display
24. Frequency Display
25. Bank/Activity Indicators
26. Battery Low Indicator
27. Keypad Lockout Indicator
28. Mode Indicators
29. Priority Channel Indicator
30. Bank/Trunk Indicators 

One Year Limited Warranty
Important:Evidence of original purchase is required for
warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION(“Uniden”)
ELEMENTS OF WARRANTY:Uniden warrants, for one year, to
the original retail owner, this Uniden Product to be free from
defects in materials and craftsmanship with only the limitations or
exclusions set out below.
WARRANTY DURATION:This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale....

Covered under one or more of the following U.S. patents:
RE31,523 4,057,760 4,092,594 4,100,497 4,114,103
4,156,193 4,157,505 4,179,662 4,219,821 4,270,217
4,398,304 4,409,688 4,455,679 4,461,036 4,521,915
4,597,104 4,627,100 4,841,302 4,888,815 4,932,074
4,947,456 5,014,348 5,199,109 5,408,692 5,428,826
5,438,688 5,448,256 5,465,402 5,471,660 5,483,684
5,548,832 5,551,071
and other patents pending.
©1997 Uniden America Corporation. All rights reserved.
Printed in the Philippines