Uniden Mystic Vhf Marine Radio With Gps Owners Manual

79
zSetting the Track Mode to “OFF” will cause severe limitations to 
the ability of the MYSTIC to create a backtrack route. The same 
temporary waypoints used to create the displayed track are 
used to compute a backtrack route. Therefore, it is highly rec-
ommended that you use the 
Auto mode whenever possible.
The following is an overly simplified diagram of the three track rate 
options. In most cases, 
Auto should meet all of your require-
ments but if you want more detail on turns and still not...

80 b. Use S and T to select the Track 
Mode you want, and press 
[ENTER].
Selecting Primary Usage
The MYSTIC can be set to either Land or Marine Usage. When in 
Land (default), the map displays land areas in white and water 
areas as dark gray. For marine applications it may be desirable to 
reverse the display, showing water as white and land as dark gray. 
This will make reading some of the data information on the water 
easier.
To select primary usage:
a. Use S and T to move to 
Primary 
Usage
. Press...

81 b. Use S and T to select the Primary 
Usage you want, and press 
[ENTER].
c. Press [ESC] to return to the Map 
screen.
Your Map screen selections have now been set. You can go back and 
change any of them at any time.
Compass Screen
Destination
Name
Destination
 Icon
CompassCustomizable
Data Fields
Heading
Marker
Sun/Moon
Position
Markers
Mystic OM.book  Page 81  Wednesday, October 22, 2003  8:59 PM 

82 Destination Name
When you are navigating on a GOTO or multileg route, the name 
of the destination is placed here. For multileg routes, the name 
displayed is the name of the destination for the leg of the route you 
are presently navigating on.
Compass/Heading Marker
Using the compass and the heading marker, you can view your 
heading information in a familiar manner. Note that you need to be 
moving for this data to be valid.
Destination Icon
When you are travelling on a route, an icon representing...

83
Large Data Screen
Destination Name
When you are navigating on a GOTO or multileg route, the name 
of the destination is placed here. or multileg routes, the name dis-
played is the name of the destination for the leg of the route you 
are presently navigating on.
Customizable Data Fields
See page 64 for the steps for customizing these fields.
Destination
Name
Customizable
Data
Fields
Mystic OM.book  Page 83  Wednesday, October 22, 2003  8:59 PM 

84
Position Screen
There are two Position screens. You can toggle between the two 
using W and X. The illustration above shows Position screen 1.
Present Position Coordinates and Elevation
Displays your present position in the coordinate system you 
choose. Also displays the elevation of your present position. If the 
MYSTIC is not computing position fixes, the last computed posi-
tion is displayed.
GPS Status
Provides information on the current status of the GPS receiver 
portion of the MYSTIC....

85 b. Use S and T to highlight 
Reset Trip. Press [ENTER].
c. You will see a Warning screen asking you to verify the reset. 
Use W or X to select 
Yes or No and press [ENTER].
Position Screen 2
Position screen 2 displays GPS data based on the navigation units 
you selected.
Road Screen
Destination Name
When you are navigating on a GOTO or multileg route, the name 
of the destination is placed here. or multileg routes, the name dis-
played is the name of the destination for the leg of the route you 
are...

86 play. Also, you will see upcoming turns in advance allowing you to 
make necessary preparations.
Customizable Data Fields
See page 64 for the steps for customizing these fields.
Scale Indicator
Use the [IN] and [OUT] keys to change the scale.
Data Screen
Destination Name
When you are navigating on a GOTO or multileg route, the name 
of the destination is placed here. or multileg routes, the name dis-
played is the name of the destination for the leg of the route you 
are presently navigating on....

87 Customizable Data Fields
See page 64 for the steps for customizing these fields.
Speed Screen
Destination Name
When you are navigating on a GOTO or multileg route, the name 
of the destination is placed here. or multileg routes, the name dis-
played is the name of the destination for the leg of the route you 
are presently navigating on.
Speedometer
Displays your speed using a familiar speedometer display. The 
scale of the speedometer is not adjustable but will change dynam-
ically to best display...

88
Satellite Status Screen
The Satellite Status screen visually displays the satellites being 
used and the strength of the received signal. Additionally, this 
screen displays how much battery life is remaining. This is a very 
handy screen when you wish to view how well your MYSTIC is 
tracking satellites.
Satellite Position Graph
The two circles indicate satellite elevation as seen from your cur-
rent position. The outer circle represents the horizon and the inner 
circle represents 45° from the...