Uniden Mystic Vhf Marine Radio With Gps Owners Manual

99 Uploaded
Using the MapSend
® software you can add detailed maps to your 
MYSTIC. Along with the detailed maps, there is a set of waypoints 
for a wide variety of categories. 
To Access Waypoints:
1. Press [MENU].
2. Select 
Database, and press [ENTER].
3. At the Database screen, select the category of Waypoint.
4. If you have uploaded a detailed map, you will notice a black line 
near the top of the database list with the name of the detailed 
map(s) you have uploaded. To select a category for the...

100 go to the first waypoint beginning with 
B, and then C and so forth. 
Press [OUT] to go in the reverse direction (
C, B, A).
Nearest To
Nearest To provides you with a way to find the waypoints nearest 
to a waypoint you select. Set 
Find By is set to Nearest To and 
press [ENTER]. You will see waypoints in the category you 
selected nearest to your present position. Once you see the 
display with the waypoints nearest to your position, you can 
change position to any waypoint in the database, or to...

101
Multileg Route
A 1-leg Route is a Route with a starting point and a destination point. 
A multi-leg Route is a group of 1-leg Routes strung together where the 
destination of one 1-leg Route is the starting point for the next 1-leg 
Route. That means if you had three 1-leg Routes, one from A to B, 
another from B to C and a third from C to D you could then put 
them together to make one multileg route. In this example you would 
have a 3-leg route that went from A to B to C to D.
These routes have an...

102
Activate/Deactivate a Route
You can activate or deactivate any stored Route. When a Route is 
being used to navigate, it is said to be active. When you want to use 
a Route to navigate with, you must first activate it.
To Activate/Deactivate a Route:
1. From any Map Screen, press [MENU].
2. At the Map Menu, select 
Routes, and press [ENTER].
3. At the 
Routes Menu, select the desired Route and press 
[MENU].
Note:If the route is active, the next screen will automatically have 
Deactivate Route...

103
Edit a Route
You can modify an existing Route by inserting a leg, deleting a leg or 
replacing a leg.To Edit a Route:
1. From any Map Screen, press  [MENU].
2. At the Map Menu, select 
Routes, and press  [ENTER].
3. At the 
Routes Menu, select the desired Route and press 
[MENU] .
4. Select 
View/Edit Route and press  [ENTER].
To Insert a Leg
 (inserts a Waypoint in the middle of an existing Leg, making 
two Legs):
1.  Select the Destination Waypoint fo r the Leg that you want to  delete 
a...

104 To Append a Leg
(Add a Leg to the end of the route.):
1. Select the next available Leg (dashes).
2. Press [ENTER].
3. Select 
Database and press [ENTER].
4. Select the desired Waypoint and press [ENTER].
Save Edited route
When you are finished editing, use S and T to select 
Save Route 
and press [ENTER] to save the Route.
Reverse a Route
You can reverse any Route stored in Memory.
To Reverse a route:
1. From any Map Screen, press [MENU].
2. At the Map Menu, select 
Routes, and press [ENTER].
3. At...

105
Create a Route Using Track History
You can automatically create a multileg route using your Track 
History. This route will be saved to your Route list with a naming 
convention of T01P01 to T01Pxx where Pxx indicates the number of 
points in the route.
To Create a Route using Track History:
1. From any Map Screen, press [MENU].
2. At the Map Menu, select 
Routes, and press [ENTER].
3. At the 
Routes Menu, press [MENU].
4. Select 
Save Trk to Rte and press [ENTER].
Vertical Profile
The Vertical...

106
Change the Sun/Moon Position
You can change the position that you want to view the Sun/Moon 
information for. The default is Position which is your present 
position.
To change the Sun/Moon Position:
1. From any Map Screen, press  [MENU].
2. At the Map Menu, select 
Sun/Moon, and press  [ENTER].
3. Select 
At field and press  [ENTER].
4. Use  W and  X to “Find By” and press  [ENTER].
5. Select Waypoint and press  [ENTER].
Change the Sun/Moon Date:
You can change the date for the Sun/Moon information...

107
Change the Fish/Hunt Position
You can change the position that you want to view the Fish/Hunt 
information for. The default is P osition which is your present 
position.
To change the Fish/Hunt Position:
1. From any Map Screen, press  [MENU].
2. At the Map Menu, select 
Fish/Hunt, and press  [ENTER].
3. Select 
At field and press  [ENTER].
4. Use  W and  X to “Find By” and press  [ENTER].
5. Select Waypoint and press  [ENTER].
Change the Fish/Hunt Date:
You can change the date for the Fish/Hunt...

108
Alarms
All the Alarm options are set in the same way. The instructions below 
apply to all the Alarm settings. When the beeper is turned on for Alarms 
an audible beep will be sounded for the Alarm. A visual alert is displayed 
for the Alarm whether the beeper is turned on or off.
To set an Alarm:
1. From any Map Screen, press [MENU].
2. At the Map Menu, select 
Alarms/Msg and press [ENTER].
3. Select the desired Alarm and press [ENTER].
4. Select Alarm Distance and press [ENTER].
Arrival Alarm
The...