Uniden Mystic Vhf Marine Radio With Gps Owners Manual

69 c. Use S and T to move to the 
second line (
Detail). Press 
[ENTER] to access the Detail 
selection list.
d. Use S and T to select the detail 
you want to display, and press 
[ENTER].
e. Press [ESC] to return to the Map 
screen.
Customizing the Map Display
The Map screen can be customized for your individual needs and 
requirements. You can select what is being displayed on the map 
as well as what additional data will be presented at the bottom of 
the screen.
Customization involves two steps:...

70 Customizing the Map Items
a. Press [MENU] from the Map display.
b. Use S and T to select 
Map Setup and press [ENTER].
c. Use W or X to select the 
Display tab.
d. Use S and T to select the options 
you want to display. If you select 
Mark All, all items will be displayed 
on the Map. If you select Clear All, 
no items will be displayed on the 
Map.
If you want to display only certain 
items, use S and T to move to 
each item, and press [ENTER]. If 
the item was checked, the check 
mark will be...

71 Turning Map Info On/Off
You can turn on or turn off the data 
fields that are displayed on the Map 
screen. When you turn them off, you 
have more room for the Map display. 
(The Default is 
Show Map Info.)
a. While in the Position Mode of the 
Map display, press [MENU].
b. The first item should be 
Hide Map 
Info
. If it is not highlighted, use S 
and T to select it.
c. Press [ENTER].
Mystic OM.book  Page 71  Wednesday, October 22, 2003  8:59 PM 

72  You are now returned to the Map 
screen with no data fields.
With the Map Info hidden, press W or X 
to go back to the cursor mode. Notice 
that the bearing and distance to the cur-
sor are shown at the bottom of the map, 
together with the scale. If the cursor 
happens to be on a map object, the 
name of the object is displayed.
To restore the Map Info:
a. Make sure you are in the Position 
Mode.
b. Press [MENU].
c. With 
Show Map Info highlighted, press [ENTER]. You will 
be returned to the Map...

73 c. Use S and T to highlight 
Select 
Map Info
, and press [ENTER].
d. Use  S and T to highlight 
Two 
Data Fields
, and press 
[ENTER]. You are returned to the 
Map display with two data fields 
displayed at the bottom.
To customize the data fields:
a. Press [MENU].
Mystic OM.book  Page 73  Wednesday, October 22, 2003  8:59 PM 

74 b. Use S and T to highlight 
Select 
Map Info
, and press [ENTER].
c. The top item has now changed to 
Customize Fields. Use S and T to 
highlight 
Customize Fields, 
and press [ENTER].
Mystic OM.book  Page 74  Wednesday, October 22, 2003  8:59 PM 

75 d. You are now returned to the Map 
screen, with the data field on the left 
highlighted.
e. For the remaining steps, see page 64.
Street Info
This option displays an information block at the bottom of the Map 
screen showing the name of the street your present position arrow 
is on. If you are in the cursor mode, the block displays the bearing 
and distance from your present position, and when you are over a 
street, the name of that street.
To select Street Info instead of Two Data Fields:
a. Be...

76 d. Use  S and T to highlight 
Street 
Info
, and press [ENTER].
You are returned to the Map display 
with the Street Info displayed at the bot-
tom.
Setting the Map Parameters
You can change how the map is orientated on the screen, the 
level of detail, the Track Mode, and the Primary Usage (land or 
marine), depending on how you plan to use your MYSTIC.
Note:Although you can set most of these parameters from either 
Map screen Mode, it is better to start from the Position Mode.
1. Press [MENU].
W....

77 2. Use S and T to highlight 
Map Setup, 
and press [ENTER]. (The Menu is 
slightly different from Cursor Mode, but 
the procedure is the same.)
3. You are now at the Map Setup options screen. Note that there are 
two tabs. The first set of parameters are on the 
Format tab.
Orientation
a. Use S and T to move to the first 
line (
Orientation). Press 
[ENTER] to access the Orientation 
selection list.
Mystic OM.book  Page 77  Wednesday, October 22, 2003  8:59 PM 

78 b. Use S and T to select the 
orientation you want, and press 
[ENTER]. The options are:
zNorth Up - North is at the top of the 
screen.
zCourse Up - The heading of the 
active leg of the active route is at 
the top of the screen. If no route is 
active, the orientation is North Up 
until a route is activated
zTrack Up - Your heading (the 
direction you are travelling) is at 
the top of the screen.
Detail
You can set the detail of the map to: highest, high, medium, low, or 
lowest. This changes the...