Home > Trane > Thermostat > Trane Touchscreen Programmable Thermostat User Manual

Trane Touchscreen Programmable Thermostat User Manual

Here you can view all the pages of manual Trane Touchscreen Programmable Thermostat User Manual. The Trane manuals for Thermostat are available online for free. You can easily download all the documents as PDF.

Page 31

BAS-SVX44A-EN31
Functions
 When starting/activating TOV, thedisplays solid indicating that TOV is ACTIVE.
 Quick
TOV Active Mode will show Occ () icon while User Configurable TOV Active Mode
Occ/UnOcc will be blank.
 Quick
 TOV Active Mode , the typical display will show the TOV time remaining as HH:MM
(Hours:Minutes) for 45 seconds. After the 45 seconds, the display will cycle to Time of Day with
AM/PM for 10 seconds, followed by HH:MM for 5 seconds, and continue repeating Time of Day and HH:MM until...

Page 32

32BAS-SVX44A-EN
Functions
 Touch blinkingto proceed to the next section, Day/Time/Period Schedule Change
Mode ,
before the 20-second time out. Time out changes to 60 seconds for the change modes.
Day/Period/Time Schedule Change Mode
This mode is used to select the day, day group, multiple day groups, period times, fan, and
occupancy. The default settings, Number of Periods, Occupancy Settings, andDay Groups, are
configured using Configuration Option Numbers 0231, 0232, and 0233 respectively.
To change...

Page 33

BAS-SVX44A-EN33
Functions
Setpoint/Fan Schedule Change Mode
This mode is used to set the heat and/or cool setpoint, occupancy, and the fan settings for the
selected day, day group, or multiple day groups. Day or Day Groups cannot be changed in this
mode. Default settings are shown in Table 8, p. 35.
To change the setpoint/fan schedule: 1. From the previous section, touch to select the period of day.
2. To change the setpoint of the selected period, touch either orto increment or
decrement the setpoint...

Page 34

34BAS-SVX44A-EN
Functions
General Notes for All Schedule Modes
 TouchingCancel() will cause all changes after the last save to be lost, the display will return to
the Home screen, and the system will return to the last save schedule settings.
 When any changes are made to the schedule, the first touch of OKwill save changes and return
to the last schedule changes mode. The second touch of OK, if no further changes are made,
will exit Schedule Change Mode and return to theHomescreen or TOV, if still...

Page 35

BAS-SVX44A-EN35
Functions
Table 8. Default settings and worksheet
Symbol Legend Listed Below
4-Period Defaults6:00 AM 70°F (21.0°C) 78°F (25.5°C) AUTO8:00 AM62°F (16.5°C)85°F (29.5°C)AUTO
6:00 PM 70°F (21.0°C) 78°F (25.5°C) AUTO
10:00 PM62°F (16.5°C)82°F (28.0°C)AUTO
2-Period Defaults8:00 AM 70°F (21.0°C) 78°F (25.5°C) AUTO10:00 PM62°F (16.5°C)82°F (28.0°C)AUTO
Monday
:° °
:°°
:° °
:°°
Tuesday
:° °
:°°
:° °
:°°
Wednesday
:° °
:°°
:° °
:°°
Thursday
:° °
:°°
:° °
:°°
Friday
:° °
:°°
:° °
:°°
Saturday
:° °...

Page 36

36BAS-SVX44A-EN
Other Thermostat Functions
The programmable thermostat has other functional features which provide more flexibility and
control in its operation. Those features are:
 Heat/Cool indicator display (for both programmable and non-programmable thermostats (refer to
 the next section, “Heat/Cool Indicator Display” )
 Non-programmable mode
 Filter change
 Clean screen
 Local/remote/outdoor temperature display and control
 Local/remote humidity display and control
 System lock
Heat/Cool Indicator...

Page 37

BAS-SVX44A-EN37
Other Thermostat Functions
Non-programmable Mode
The thermostat is capable of being configured as non-programmable (refer to Configuration
Option Number 0140 in Table 7, p. 24). If the thermostat is set to non-programmable mode, certain
icons are not displayed and scheduling and override functionality is not available. The Home
screens will similarly display as shown below.
Non-programmable Functionality
 Scheduling and Override modes are not available.
 The following features are not...

Page 38

38BAS-SVX44A-EN
Other Thermostat Functions
Filter Change
Filter change indicates when the system change filter timer is expired. The filter icon ( ) will blink
continuously 1.5 secondsONand 0.5 secondsOFFon theHomescreen (orTOV Activescreen)
until this feature is reset. To reset the filter change indicator, press and hold both left and right
arrows at the same time for 3 seconds (refer to the illustration below).
The default setting for filter replacement is one (1) month. To change this duration, refer...

Page 39

BAS-SVX44A-EN39
Other Thermostat Functions
Local/Remote/Outdoor Temperature Display and Control
The thermostat has the capability of displaying the local indoor temperature and/or the remote
indoor/outdoor temperatures, depending on the value setting for Configuration Option Number
0210. There are two terminals to connect the remote sensor,S1andS2. The table that follows
provides information about displaying either local, remote, or outdoor temperatures and how
temperatures are controlled (refer to...

Page 40

40BAS-SVX44A-EN
Other Thermostat Functions
Local/Remote Humidity Display and Control
The thermostat has the capability of displaying the local/remote humidity readings, depending on
the value setting for Configuration Option Number 0200. An external humidity sensor is connected
to terminalHp(+)andHs(-). The table that follows provides information about humidity sensor
selection. For details about setting or changing dehumidification, refer to the section,“Dehumidify
Setup,” p. 28.
Option 
Number...
Start reading Trane Touchscreen Programmable Thermostat User Manual

Related Manuals for Trane Touchscreen Programmable Thermostat User Manual

All Trane manuals