TP-Link Router TL-WR941N User Manual

TL-R480TSMB Broadband Router User Guide  
 
45
•  Port Scan -  During the specific time,  if a computer (identified by  a particular source IP 
address) transmits TCP SYN packets to another  computers (identified by a destination 
IP address) ten different ports, then the source IP address will be deemed to make Port 
Attacks. And the Router will start  up the blocking function immediately. 
•   IP Snoop -  If you select this option, the Router  will monitor whether the packets from the 
particular...

TL-R480TSMB Broadband Router User Guide  
 
46
ACK is considered as abnormal. And the Router will start up the blocking function 
immediately. 
•   Unknow Protocol  -  In IP head the protocol type fiel d, 135 and the value bigger than 135 
is reserved and undefined. Because the protocols are undefined, we can not predict a 
specifically unknow protocol  is well-meaning or baleful. To these nonstandard protocols, 
the carefully attitude is the best way to prevent them interning into  the protected...

TL-R480TSMB Broadband Router User Guide  
 
47
 
Figure 4-38 
¾  Destination IP Address  -  The “Destination IP Address” is  the address of the network or host 
that you want to assign to a static route. 
¾  Subnet Mask  -  The “Subnet Mask” determines which por tion of an IP address is the network 
portion, and which portion  is the host portion. 
¾ Default Gateway  - This is the IP address of the gatew ay device that allows for contact 
between the router an d the network or host. 
¾ Status  -  This...

TL-R480TSMB Broadband Router User Guide  
 
48
Click the Delete button to delete the entry. 
Click the  Enable All  button to enable all the entries. 
Click the  Disable All button to disable all the entries. 
Click the  Delete All button to delete all the entries. 
Click the  Previous  button to view the information in the previous screen,  click the  Next button to 
view the information in the next screen. 
4.8  Session Limit 
Choose menu “ Session Limit”, you can see the submenus  under the main menu:...

TL-R480TSMB Broadband Router User Guide  
 
49
Figure 4-42. 
Step 2:  Enter the appropriate LAN IP Address,  Max Session and then select the status. 
 
Figure 4-42 
Step 3:  Click the  Save button. 
4.8.2 Session List 
Choose menu “Session Limit →Session List ”, you can view the t he information about the 
number of connection. 
 
Figure 4-43 
)  Note: 
You can click the  Refresh to update the information. 
4.9 QoS 
Choose menu “ QoS”, you can see the subm enus under the main menu: 
 
Figure 4-44 
Click...

TL-R480TSMB Broadband Router User Guide  
 
50
4.9.1 QoS Settings 
Choose menu “ QoS→QoS Settings ”, you can configure the Upload Bandwidth and Download 
Bandwidth in the next screen, their value  you configure should be less than 1000000Kbps. 
 
Figure 4-45 
4.9.2  QoS Rules List 
Choose menu “ QoS→QoS Rules List ”, you can view and configure  the QoS rules in the screen 
below. 
 
Figure 4-46 
¾  Description - This is the information about  the rules such as address range. 
¾ Mode -  Mode can be...

TL-R480TSMB Broadband Router User Guide  
 
51
 
Figure 4-47 
Step 3:  Click the  Save button. 
4.10 IP & MAC Binding 
Choose menu “ IP & MAC Binding ”, you can see the submenus under the main menu:  Binding 
Setting, ARP List . 
 
Figure 4-48 
Click any of them, and you will be able to configure the corresponding  function. The detailed 
explanations for each submenu are provided below. 
4.10.1  Binding Setting 
Choose menu “ IP & MAC Binding →Binding Setting ”, you can view and add IP & MAC binding...

TL-R480TSMB Broadband Router User Guide  
 
52
 
Figure 4-49 
¾  MAC Address  -  This field displays the MAC address of the controlled computer in the LAN. 
¾  IP Address - This field displays the assigned IP addr ess of the controlled computer in the 
LAN.  
¾  Bind  - Select Whether enable the arp binding or  not. Only bind the MAC address and IP 
address can the function take effect. 
To add/modify an IP & MAC binding entry:   
Step 1:  Click Add New… /Modify  shown in  Figure 4-49, you will see a new...

TL-R480TSMB Broadband Router User Guide  
 
53
 
Figure 4-51 
Step 3:  Click Find button, then you will see the entry wi th the specific MAC address or IP 
address. 
Step 4:  Click Back  to return the previous screen. 
) Note: 
You can click “to page” to edit the entry in the corresponding screen. 
Other configurations for the entries as shown in Figure 4-49: 
C

lick the  Delete button to delete the entry. 
Click the  Enable All  button to enable all the entries. 
Click the  Delete All button to delete...

TL-R480TSMB Broadband Router User Guide  
 
54
Click Load  to load the specific item to  the IP & MAC Binding list (shown in Figure 4-49). 
C
lick Delete to load the specific item  to the IP & MAC Binding list. 
Click the  Bind All button to bind all the current items, available after enable. 
Click the  Load All button to load all items to the IP & MAC Binding list (shown in  Figure 4-49). 
C

lick the  Refresh  button to refresh all items. 
) Note: 
An item could not be loaded to the IP & MAC Bind ing...