TP-Link Router TL-WR941N User Manual

TL-R480TSMB Broadband Router User Guide  
 
5
 
Chapter 3. Quick Installation Guide 
After connecting the TL-R480T router into your  network, you should configure it. This chapter 
describes how to configure the  basic functions of your TL-R480T SMB Broadband Router. These 
procedures only take you a few minutes. You can access the Internet via  the router immediately 
after it has been successfully configured. 
3.1  Configure PC 
Step 1:  Click the  Start menu on your desktop, right click  My Network...

TL-R480TSMB Broadband Router User Guide  
 
6
 
Figure 3-2 
Step 3:  In the next screen, select  General tab, highlight Internet Protocol (TCP/IP), and then 
click the  Properties button. 
 
Figure 3-3  

TL-R480TSMB Broadband Router User Guide  
 
7
Step 4: Configure the IP addr ess as shown in Figure 3-4. After that, click  OK. 
 
Figure 3-4 
)  Note: 
You can c onfigure the PC to get an IP address manually, select “Obtain an IP address 
automatically” and “Obtain DNS server addr ess automatically” in the screen above.
 For Windows 
98 OS or earlier, the PC and router may need to be restarted.     
Now, you can run the Ping command in the comm and prompt to verify the network connection. 
Please click...

TL-R480TSMB Broadband Router User Guide  
 
8
Figure 3-5 
If the result displayed is similar to the screen  shown below, it means that your PC has not 
connected to the Router. 
 
Figure 3-6 
You can check it follow the steps below: 
)  Note: 
Is the connection between your PC and the Router correct? 
The LEDs of LAN port which you  link to the device and the LEDs on
 your PCs adapter should be lit. 
Is the TCP/IP configuration for your PC correct? 
If the Routers IP address is 192. 168.1.1, your PCs IP...

TL-R480TSMB Broadband Router User Guide  
 
9
 
Figure 3-7 
)  Note: 
If the above screen ( Figure 3-7) does not prompt, it means t hat 
 your web-browser may be set to a 
proxy. Choose  Tools menu→Internet Options →Connections→LAN Settings, in the screen 
that appears, cancel the  Using Proxy checkbox, and click OK to finish it. 
Step 1:  Select the  Quick Setup  tab on the left of the main menu and the “Quick Setup” screen 
will appear. Click the  Next button. 
 
Figure 3-8 
Step 2:  Select the...

TL-R480TSMB Broadband Router User Guide  
 
10
) Note: 
The router supports three popular ways to connect to Internet. Please select one compatible with 
your ISP, if you are given anothe r way not listed here, refer to Network→ WAN for detailed list. 
Step 3:  If you choose  PPPoE, you will see the screen as shown in  Figure 3-10, enter the 
Username  a

nd  Password  provided by your ISP. These fi elds are case sensitive. If you 
have difficulty with this proce ss, please contact your ISP. 
 
Figure...

TL-R480TSMB Broadband Router User Guide  
 
11
 
Chapter 4. Configuring the Router 
This User Guide recommends using  the “Quick Installation Guide” for first-time installation. For 
advanced users, if you want to know more abo ut this device and make use of its functions 
adequately, you need to read this chapter  and configure advanced settings though the 
Web-based Utility. 
After your successful login, you can configur e and manage the router. There are main menus on 
the left of the Web-based...

TL-R480TSMB Broadband Router User Guide  
 
12
 
Figure 4-1 
¾  LAN  - This field displays the current informat ion for the LAN, including the “MAC address”, 
“IP address” and “Subnet Mask”. 
¾  WAN  - This field displays the parameters applied to the WAN ports of the router, including 
“MAC address”, “IP address”, “Subnet Ma sk”, “Default Gateway” and so on. 
) Note: 
If PPPoE/L2TP/PPTP is chosen as  the WAN connection type, the Disconnect button will be 
shown here while you are accessing the Internet....

TL-R480TSMB Broadband Router User Guide  
 
13
4.3 Network 
Choose menu “ Network”, the next submenus are shown below: 
 
Figure 4-2 
Click any of them, and you will be able to configure the corresponding  function. The detailed 
explanations for each submenu are provided below. 
4.3.1  LAN 
Choose menu “ Network→LAN ”, you can configure the IP par ameters of the LAN on the screen 
below. 
 
Figure 4-3 
¾  MAC Address  - This field displays the physical address of the LAN. The value cant be 
changed. 
¾...

TL-R480TSMB Broadband Router User Guide  
 
14
4.3.2 WAN 
Choose menu “ Network→WAN”, you can configure the IP par ameters of the WAN on the screen 
below. 
The Router provides six connecti on types for WAN to connect to the Internet, they are “Dynamic 
IP”, “Static IP” , “PPPoE”, ”BigPondCable” , “L 2TP” and “PPTP” For configuring the WAN, you 
should select the connection type  firstly according your needs. 
1. Dynamic IP 
If you aren’t given any login parameter s and IP information, please select...