Toshiba W-528 Manual

21
PLAYBACK
Picture Search
A tape runs at 5 times or 7 times the normal playback speed so
that you can quickly locate a particular scene.
1Press FF or REW during playback.
The tape runs at 5 times the normal playback speed.
2To change the tape speed to 7 times the normal playback
speed, press and hold 
FF or REW.
If you release it, the tape speed returns to 5 times.
Note
If you press FF or REW during picture search, the mode changes to fast-
forwarding or rewinding.
To resume normal playback
Press...

22
Frame Advance
A picture advances frame by frame.
1Press PLAY during still playback.
Each time you press PLAY, the picture advances one frame.
Slow-motion Picture
The tape runs at 1/7th or 1/15th the normal playback speed.
1Press SLOW during playback.
The tape runs at about 1/7th the normal playback speed.
Each time you press 
SLOW, the speed alternates between 1/7th and
1/15th.
To resume normal playback
Press
 PLAY.
Notes
• The slow-motion picture mode is automatically cancelled after about 5
minutes...

23
PLAYBACK
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1Turn on the VCR and load a cassette.
2Press PROG. to display the MENU screen.
3Select “SET UP” using FF or REW, and press ENTER.
4Select the length of the tape, using
FF or REW.
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5Press PROG.  to exit.
6Press REMAIN/COUNTER.
The remaining time (“R - : - -”) appears in the VCR display.
Notes
• The...

24
1On the SET UP screen, select
“COUNTER MEM.” using 
PLAY or
STOP, and set to “ON” using
REW or FF.
2Press PROG.  to exit.
      The memory-stop feature allows you to quickly return to a
counter reading of “0H00M00S” from any point on the tape.
Memory stop is automatically turned on whenever the time
counter with memory is displayed on the TV screen. This is
convenient when you want to watch a segment of the tape
repeatedly. You may also discover other useful application for
this feature.
Notes: If you...

25
RECORDING
Watching a TV program whilerecording another
1)While recording, press TV/VCR to turn off
“VCR” indicator.
2) Choose another channel using the channel
selector on the TV.
Skipping unnecessary scenes while
recording
Press PAUSE/STILL to stop recording
momentarily.  To resume recording, press
PAUSE/STILL again.
Note
The VCR automatically shifts to the stop mode if the
recording pause mode continues for 10 minutes.
Basic Recording
1Load a cassette with the safety tab attached.
2Press TV/VCR so...

26
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:20 p.m. until 10:00 p.m. on August 30.  Today is August 25.
1Load a cassette with the safety tab attached.
2Press PROG. to display the MENU screen.
3Select “PROGRAM” using FF or
REW, and press ENTER.
4Move to the next using FF, and
select the channel number 25 by
pressing
 number buttons 2 and 5,
PLAY or STOP.
•You can make “L1/L2”(For W-528/W-522 only) or “ L” (For W-422 only)
appear on the channel number...

27
RECORDING
5Move to the next using FF, and set
the recording date using 
PLAY or
STOP.
The date changes as follows:
[WKLYSU]…
[WKLYSA]: You can record TV programs on the same
channel on the day and time every week.
[MO~FR]: You can record TV programs on the same channel on the
day and time Monday through Friday.
6Move to the next using FF, and set
the hour and minutes of the
recording start time.
7Move to the next, and set the
recording off time.
8Move to the next, and select the
tape speed (SP) using...

28
Confirming the timer programs
Press PROG. during timer recording  mode.
The screen for confirming will appear.
Press 
PROG.again to exit from confirmation
page.
Changing/cancelling the timerprograms
1)If the  TIMER  indicator  is lit, press bothTIMER  to turn  it off,  and then turn the VCR
on  by pressing VCR  POWER.
2)With steps 2 to 9, change the items.
To cancel a program, select the program you
want to cancel in step 4, and press 
CANCEL.The line is then cleared.
3)Press both 
TIMER  to return...

29
RECORDING
Recording the SAP/Stereo Broadcast
1On the SET UP screen (page 15),
select “SAP SET” using 
PLAY or
STOP, and set to “ON” using REW
or FF.
2Press PROG. once to exit.
3Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
Selecting a sound
Sounds recorded on the tape
According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set “SAP...

30
TOSHIBA TV’s Control
1Press TV to set the remote control operating your TV.
2
POWERTo turn the TV on or off.
CH/TRKTo select TV channels in the upper or lower
direction.
TV VOLTo adjust the sound level.
I.SELECTTo select an external source such as a VCR.
Number buttonsTo select TV channels. When selecting channels
1 to 9, first enter 0 and then the desired number.
100To substitute for 100 channel key.
DISPLAYTo turn on or off TV’s screen display.
ENTERTo use for the TV’s ENTER key.
Point  the remote...