Toshiba Tecra 8200ser Maintenance Manual
Have a look at the manual Toshiba Tecra 8200ser Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. Remove two mask seals at the bottom corners of the
display assembly using a pair of fine-tipped tweezers.2. Remove two M2.5x6 flat head brass screws securing
the display mask.3. There are 23 latches securing the display mask.
Carefully insert your fingers between the mask and the LCD panel and pry open the latches starting from the bottom seven latches, to the five latches on the right
and left sides, ending with the six toplatches.FL INVERTER AND 14.1” LCD REMOVAL1. Lift the plastic shield.
2. Carefully lift up the FL inverter board and
disconnect the LCD/FL cable from CN1 and the
FL cable from CN2.
3. Remove four mask seals to expose four screws
securing the LCD module.4. Remove four M2X4 brass screws securing the
LCD module.
5. Carefully rotate out the top of the LCD module
enough to access the display cable6. Peel off the tape securing the LCD/FL cable and disconnect the cable.14.1” DISPLAY MASK REMOVALLatchMask sealsDisplay
maskLCDLCD/FL cableLCD moduleFL inverter boardM2x4
brassscrewsM2x4
brassscrewsMask
sealsMask
sealsFL cablePlastic shieldTOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION TecraTM8200 Series