Toshiba Tecra 8200ser Maintenance Manual

FIELD REPLACEABLE UNIT DOCUMENTATION8200 Series  TecraGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).FIELD REPLACEABLE UNIT DOCUMENTATION8200 Series  TecraGENERAL INFORMATIONTMBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
 not connected to the unit and...

FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM8200 Series
TOSHIBA
Tough Enough for Today’s World.         TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. SELECT BAY REMOVAL
4. DVD-ROM/CD-RW DRIVE DISASSEMBLY
5. FDD DISASSEMBLY 
6. MEMORY MODULE REMOVAL
7. WIRELESS LAN REMOVAL
8. HDD REMOVAL
9. KEYBOARD REMOVAL
10. TOP COVER REMOVAL
11. MEMBRANE SWITCH REMOVAL
12. SPEAKERS AND MICROPHONE REMOVAL
13. SOUND BOARD REMOVAL
14. COOLING MODULE REMOVAL
15. CPU REMOVAL
16. MODEM BOARD...

TOSHIBA
Tough Enough for Today’s World.OPTIONAL PC CARD REMOVAL1. Pull out  the eject button of the PC card to be
    removed.2. Press firmly to eject the PC card.
3. Grasp the PC card and remove it.
NOTE:  Before removing any PCMCIA device, make
             sure it is “STOPPED” in the PC Card Manager.SELECT BAY REMOVAL1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
    arrow.
FIELD REPLACEABLE UNIT...

FDD DISASSEMBLYFDD DISASSEMBLY4. Disconnect the connector flexible cable from the 
    FDD.NOTE:  The brackets, flexible cable and the screws 
             are separate parts.Please DO NOT return them              to TOSHIBA.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM8200 Series2. Remove four M2x4 black screws 
3. Remove the frame.
4. Remove two M2x8 silver screws.
5. Remove the spacer, connector, and the connector
    cover from the CD/DVD ROM...

MEMORY MODULE REMOVALWIRELESS LAN REMOVAL1. Turn the computer upside down. 
2. Remove two M2.5x4 black flat head screws and 
    remove the memory cover.
3. Spread the  memory clips outward and pull the memory
    module out of the connector on a 45 degree angle.HDD REMOVAL1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screws 
    securing HDD cover
3. Push up the raised nubs to remove the HDD cover.M2.5x4 black
flat head screwsHDD coverTOSHIBA
Tough Enough for Today’s World....

  HDD  REMOVAL5. Remove four M3x4 flat head brass screws securing
    the HDD to the bracket and lift the drive out of the    bracket.
6. Unplug the HDD connector from the drive.KEYBOARD REMOVAL1. Open the display panel.
2. Using the case separator, unlatch the keyboard holder
    at the top of the keyboard.M3x4 flat head brass screws3. Remove two M2.5x2.8 black screws securing the
    keyboard. 4. Lift out the keyboard and set it as shown above. 
5. Disconnect the keyboard cable from PJ580 on the...

MEMBRANE SWITCH REMOVAL1. Disconnect the membrane switch cable from PJ730
    on the sound board.2. Lift out the membrane switch.Membrane switch 
cablePJ730Membrane
switchTOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM8200 SeriesKEYBOARD REMOVAL3. Lift out the keyboard and set it on the palmrest.
4. Disconnect the keyboard cable from PJ720 and lift
    out the keyboard.KeyboardKeyboard 
cablePJ720TOP COVER REMOVALTOP COVER REMOVAL1. Turn the computer upside down and...

SOUND BOARD REMOVALCOOLING MODULE REMOVAL1. Lift the strip of glass tape securing the microphone and
    speaker cables.2. Disconnect the speaker cable from PJ961 and the
    microphone cable from PJ964 on the sound board.
3. Remove the cables and lift out the speaker assemblies.1. Disconnect the sound cable from PJ407 on the 
    system board.2. Remove two M2.5x4 screws securing the sound 
    board.3. Lift out the sound board assembly.
4. Disconnect the sound cable from PJ1 on the
    sound board.1....

.TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM8200 SeriesCPU lockLOCKCPU REMOVALCPU lockOPEN1. Rotate the CPU lock 180 degrees clockwise, to the 
    OPEN position, and lift the CPU out of the socket.1. Remove one M2.5x4 brass screw securing the Wireless
    LAN antenna relay board and three M2x4 silver screws
    securing the modem relay board.
2. Lift up the left side of the modem relay board to disconnect    from PJ610 on the system board and remove the modem...

SYSTEM BOARD REMOVAL1. Remove one M2.5x6 black screw securing the  
    select Bay cover.2. Remove the HDD connector cover.FIELD REPLACEABLE UNIT DOCUMENTATION  TecraTM8200 Series
TOSHIBA
Tough Enough for Today’s World.3. Remove four M2.5x4 brass screws and 
    one M2.5x4 hexagonal  screw securing the 
    system board.4. Lift out the system board.1. Unfold the PC card eject buttons and remove the 
    PC card slot cover.PC card slot coverEject buttonsRTC BATTERY REMOVAL1. Disconnect the RTC battery...