Toshiba Strata Se, Strata Vie General Description Manual

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 9 
PROGRAM 03 
SYSTEM ASSIGNMENTS ,(OPTIONS) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial 13 on the dial pad. SPKR LED flashes continuously. 
The various LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED shoulc...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 10 
PROGRAM 04 
CO LINE OUTPULSING SELECTION 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. 
2) Depress the m key on station 13/l 7. 
3) Dial li on the dial pad. Station 13/l 7 LED 19 on. 
System is in program mode.. 
Normal functions halt on station 13117. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Each CO...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 11 
PROGRAM #4-CO LINE IDENTIFICATION 
(LCD EKT Required) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
LCD is in program mode. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD: Program No.?. 
3) Dial 91 on the dial pad SPKR LED flashes continuously. 
LCD displays program number. 
4) Refer to the System Record Sheet....

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 12 
PROGRAM 05 
AUTOMATIC RECALL FROM HOLD TIMING 
(This program is used only if LEDs 10, 1 I and 12 are ALL off in Program 5#XX.) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. .% 
Normal functions halt on station 13117. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial 3 i on the dial pad. SPKR LED flashes continuously. 
One LED indicates present data. 
4)...

TABLE 13 
PROGRAM 0#5 
CAMP-ON TIMEOUT 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial a f 1 on the dial pad. SPKR LED flashes continuously. 
One LED indicates present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should 
Using the various keys, turn an associated be on. 
LED on or off, as...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 14 
PROGRAM 06 
AUTOMATIC RELEASE ON HOLD ENABLE 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. , 
2) Depress the m key on station 13/l 7. 
3) Dial a 1 on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 15 
PROGRAM 0#6 
TRUNK-to-TRUNK CONNECTION ENABLE 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
2) Depress the w key on station 13/l 7. 
3) Dial 111 on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 16 
PROGRAM 07 
AUTOMATIC RELEASE ON HOLD TIMING 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. .( 
2) Depress the m key on station 13/17. 
3) Dial ii on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Using...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 17 
PROGRAM 0#7 
AUTOMATIC RELEASE ON HOLD TIMING 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. ’ 
2) Depress the m key on station 13/l 7. 
3) Dial ljd on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 18 
PROGRAM 08 
CO LINE CALL PICKUP SELECTION 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. 
2) Depress the tm key on station 13/17. 
3) Dial 13 on the dial pad. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Using the...