Toshiba Strata Dk280 Liquid Crystal Display Digital Telephone User Guide

CO line Number: 
1. 
2. 
3. 
4. 
5. 
6. Incoming Call 
I 
NO. NNN 
LINE 10 RINGING 
1 
I 
NO. NNN 
CAMP-ON 4 
1 
When Call Is Answered 
Hold 
[::I;“,:‘::,‘:,:,,] 
m> 
Hold Recall 
Outgoing 
[,,,,,I 
-- 
CO Line Queuing 
(Callback) 
[LINE 3 AC!‘. ‘,,] 
Incoming CO call-the system station line number-displays if your station is 
programmed for incoming ringing on that CO line, as long as no CO identification 
is programmed. 
Transferred CO call-CO line is transferred to your station in the ringing state by...

J : 
Date/Time: 
Dialed Number: 
1. CO Line 
2. Internal 
[DN] 
Dialed Number 
identification Service 
(DNIS) Calls: 
1. Press Page to display date/time when talking on a Central Office (CO) line 
(Soft Keys must be off before the call is started). 
2. The date/time is adjusted on a system-wide basis by the station located in 
port 00 (usually station 200). 
3. Continued pressing of 
Page toggles the display in succession among: 
Date/Time, Number Dialed, and Elapsed Time of the present call. 
The digits...

TOSHIBA TSD 
LINE 3 CALLING For DNIS calls. 
I 
TOSHIBA TSD 
LN 3 CALL 201 
1 When the call was forwarded to your station. 
When the call is transferred. 
I 
TOSHIBA TSD 
ANSWERED LINE 3 
I When the call is answered. 
For calls that recall the transferring station 
Held call automatically recalls your station after a programmed period of time. 
Directory Number Display: 
r-Z-L-1 
Door Phone/Monitor: 
I DOOR PHONE IA El- 
/000RPHON:D;INNNI 
To find out the actual Directory Number of a [DN] button if it...

Elapsed Time: 
LCD Name/Number 
Display: 
1. Idle Station 
2. Called Station 
least Cost Routing (LCR): 
While you are making an outgoing Central Office (CO) line call, the call’s elapsed 
time is displayed. Elapsed time automatically replaces the dialed number on the 
display after a programmed period of time. (Timing begins when a Line button is 
pressed.) 
Notes: 
1. On a CO line call, the display can be alternated between date/time, 
elapsed time, and dialed number by pressing Page (Soft Keys 
must...

Message Waiting: 
Message Waiting/Voice 
Mail: 
Off-hook Call Announce: 
[,,,,::I:::] 
nssl 
[,,,,::;:::I 
OKMOJ 
Overrides: 
1. Busy Override 
[,.,,::;:::I 
mobw When you set message waiting at another station, the number of that station is 
displayed. 
When you hang up after setting Message Waiting at another station, a reminder 
is shown on the top row of your display. A “+” indicates there are more messages 
in memory. Press Scroll to rotate through more messages. 
The display will show the numbers...

: 
2. Executive Override 
I 
NO. NNN 
MMM EXEC OVRD 
I 
NO. MMM 
NNN EXEC OVRD 
3. Do Not Disturb (DND) 
Override 
NO. NNN 
MMM DND OVR 
4. Privacy Override 
Recalling Station: 
[mj 
au-a 
Your LCD telephone displays the number of a station (MMM) initiating executive 
override when you are on the telephone. The number will remain displayed until 
override is disconnected. 
When you initiate Executive Override, your LCD telephone displays the number 
of the station that is overridden (MMM). The station...

Speed Dial Memo: 
*ll TOSHIBA 
7145833700 
Toll Restriction and 
Traveling Class Override 
Codes: 
G] 
El,,* 
Two-CO Line Calls: 
1. Tandem 
[JA;“:;‘~:,“:lr:,j 
EljlY 
2. Conference 
NO. NNN 
CONF LINE N1 N2 
1 
When using Speed Dial Memo (Mode + 8 + the speed dial number), the name 
and number are displayed. Press Page to display more. 
TOSHIBA is the memo (up to 12 characters). 
714 583 3700 is the number (up to 16 digits). 
After you access a CO Line and press Cnfmn + # 4 7 to dial a complete toll...

18  

Feature Operation 
. 
To Set the Date: 
1. Place handset on-hook. 
2. Press a [DN] + # 6 5 1. 
3. Enter the date. 
4. Press Redial. 
5. Press Spkr. 
To Set the Time: 
1. Place handset on-hook. 
2. Press a [DN] + # 6 5 2. 
3. Enter the time. 
4. Press Redial. 
5. Press Spkr. This chapter provides instructions for LCD telephone features. Consult the 
Strata DK280 Digital Telephone User Guide for instructions about features that 
apply to both non-LCD and LCD telephones. 
Date/Time/Day Adjustment 
This...

To Set the Day: 
1. Place handset on-hook. 
2. Press a 
[DN] + 
#653. 
3. Enter the day (see 
codes on the right). 
4. Press Redial. 
5. Press Spkr. 
In the following examples, 
NNN = Directory Number 
which is being forwarded. 
MMM = the forward-to 
number. 
Call Forward Displays: 
1. Call Forward-All Calls 
2. Call Forward-Busy 
CF-B :NNN-MMM 
JAN 26 TUE 01:43 
I 
I 
1 = Sunday 
2 = Monday 
3 = Tuesday 
4 = Wednesday 
5 = Thursday 
6 = Friday 
7 = Saturday 
You will hear a confirmation tone. 
Call...