Home
>
Toshiba
>
Communications System
>
Toshiba Strata Dk Personal Computer Data Interface User Guide
Toshiba Strata Dk Personal Computer Data Interface User Guide
Here you can view all the pages of manual Toshiba Strata Dk Personal Computer Data Interface User Guide. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 41
Mode Definitions Data Communications Mode Strata DK PC/Data Interface 5/9933 RPCI/DIU Data Speed (Baud Rate) DIUs pass data at a baud rate of up to 19,200 bits per second (bps), if the call was established by manually dialing from a data telephone. If the call was established with AT commands from a PC or terminal, the DIU passes data at up to 9600 bps. The baud rate of a DIU is transparent when originating calls with the data telephone or when receiving data calls, manually and automatically. When...
Page 42
Mode Definitions Data Communications Mode 34Strata DK PC/Data Interface 5/99 NoteA DIU assumes the V1 default value when power is initially applied to it or when the modular line cord is disconnected and then reconnected. EODisable character echo in Command Mode E1Enable character echo in Command Mode H0Go on-hook (hang up) H1Go off-hook OGo to Communication Mode Q0DIU returns Result Codes Q1DIU does not return Result Codes SR = nSet Register “R” to value “n” (R = 0~12) SR?Display value stored in...
Page 43
Mode Definitions Data Communications Mode Strata DK PC/Data Interface 5/9935 Table 6 DIU Result Code Set No.WordDescription 0OK Command executed 1Connect Connection at 0 to 300 bps 2Ring Ring Signal Detected 3No Carrier Carrier signal not detected, or lost 4ErrorInvalid command, checksum. Error in command line, or command line exceeds 255 characters 5Connect 1200 Connection at 1200 bps 7Busy Busy signal detected 10Connect 2400 Connection at 2400 bps 11Connect 4800 Connection at 4800 bps 12Connect 9600...
Page 44
Mode Definitions Data Communications Mode 36Strata DK PC/Data Interface 5/99 NoteA DIU assumes these default values when power is initially applied to it or when the modular line cord is disconnected and then reconnected. Table 8 Default Values RegisterVa l ueS-Register Control S0Auto ring enabled S0 = 1 S10 rings S1 = 0 S2ASCII 43 S2 = 43 S3ASCII 13 S3 = 13 S4ASCII 10 S4 = 10 S5ASCII 08 S5 = 8 S730 sec. S7 = 30 S90.6 sec. S9 = 6 S100.7 sec. S10 = 7 S121 sec. S12 = 50 Table 9 DIU Dialing Modifier Set...
Page 45
Strata DK PC/Data Interface 5/9937 Index B baud rate,7 C call data call while on a voice call, 14, 15 data device,10 from data telephone,12 from the externa PC or terminal,21 from your PC or terminal,11 terminate,10 voice call while on a data call,14 CO line,15, 26 CO line access codes,28 communication parameters,7 options,7 connect LED,6 D data bits,8 data call,3, 10, 12, 14, 24 data communications command mode, 30 mode (on-line state), 32 data communications mode,29 data release,3, 10, 12, 13, 15, 19,...
Page 46
Index S ~ V 38Strata DK PC/Data Interface 5/99 S spkr,16, 27 s-registers,31 stop bits,8 switch between data communications and TAPI modes, 29 T terminate a call data connection state, 27 from data telephones,13, 19 from external PC or terminal,22 from PC or terminal,13 voice connection state,27 voice or data,15 V verify communications,11 from your external PC or terminal,20 from your PC or terminal,16