Toshiba Satellite C75d-a Manual

Notes on useThis software is a multimedia player which can be used to play back video,
music and photo. However, some files may not be able to play back normally.
It is recommended that the AC adaptor be connected while TOSHIBA
Media Player is running. Power saving features may interfere with
smooth playback. When TOSHIBA Media Player is used with a battery
power, set the Power Options to "Balance".
The screen saver is disabled while TOSHIBA Media Player is playing
a video file or slideshows of...

2. Click Photos in the upper-left corner of the screen.
3. Select a folder icon or date icon for playback.
4. Click a photo file to playback.
Opening TOSHIBA Media Player by sMedio TrueLink+
Manual
The features and operations about TOSHIBA Media Player are explainedin the TOSHIBA Media Player Manual.
Use the following procedure to open TOSHIBA Media Player Manual:
Click the  Tutorials  icon on the Start Page of TOSHIBA Media Player.
Use the following procedure to open TOSHIBA Media Player Online help:...

The TOSHIBA PC Health Monitor software does not extend or modify
TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply.
Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started by clicking  Desktop ->
Desktop Assist (in taskbar) -> Support & Recovery -> PC Health  Monitor .
The TOSHIBA PC Health Monitor main screen will be displayed and on
clicking  Please click here to enable TOSHIBA PC...

Operate the computer at full power.
Do not use power-saving features.
Do not write to the media when the virus check software is running.
Wait for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.
Do not use utilities, including those intended to enhance Hard Disk Drive access speed. They may cause unstable operation and damage data.
Do not shut down/log off or Sleep/Hibernate while writing or rewritingthe media.
Set the computer...

When you reinstall the Windows operating system, the hard disk will
be reformatted and all data will be lost.
Please make sure that the Boot Speed is set to  Normal. (To access it,
click  Desktop -> Desktop Assist (in taskbar) -> Tool & Utilities ->
System Settings -> Boot Options .)
Please make sure to use the default Boot Mode option in the BIOS
setup utility before restoring.
1. In the  Settings  charm, click  Power and then select  Restart.
2. Hold down the  F2 key and then release this key one...

Restoring the pre-installed software from the
Recovery Hard Disk Drive
A portion of the total Hard Disk Drive space is configured as a hiddenrecovery partition. This partition stores files which can be used to restorepre-installed software in the event of a problem.
If you subsequently set up your Hard Disk Drive again, do not change, delete or add partitions in a manner other than specified in the manual,otherwise you may find that space for the required software is notavailable.
In addition, if you use...

Chapter 6
Troubleshooting TOSHIBA has designed this computer for durability, however, shouldproblems occur you are able to use the procedures detailed in this chapter
to help determine the cause.
All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Problem solving process Resolving problems will be much easier if you observe the following
guidelines:
Stop immediately when you recognize a problem exists as taking...

Check all cables to ensure they are correctly and firmly attached to the
computer - loose cables can cause signal errors.
Inspect all connecting cables for loose wires and all connectors for loose pins.
Check that your disc media is correctly loaded
Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems toTOSHIBA Support. In addition, if a problem recurs, the log you have madewill help to identify the problem faster....

HardwareIf you cannot find a software problem, you should
then check the setup and configuration of your
hardware. First run through the items in the
preliminary checklist as described previously
then, if you still cannot correct the problem, try to identify the source - the next section provideschecklists for individual components and
peripherals.Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software canbe used with...

If the indicator is glowing, the computer is on. Also, try turning the computer
off and then on.
If you are using an AC adaptor, verify that the computer is receiving power
from the external power source by looking at the  DC IN/Battery indicator. If
the indicator is glowing, the computer is connected to a live external power
source.
The computer will not load advanced options during startup
By holding down one of the following keys during startup, your computer
will load advanced options as shown...