Toshiba Projector Tlp X4100u User Manual

OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-X4100U 

SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
2...

3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not...

4
IMPORTANT SAFETY INSTRUCTIONS
7. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
8. Power-Cord Protection
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
9. Overloading
Do not overload wall outlets; extension...

S3125A
5
IMPORTANT SAFETY INSTRUCTIONS
13. Stack Inhibited
Do not stack other equipment on this product or
do not place this product on the other equipment.
Top and bottom plates of this product develops
heat and may give some undesirable damage to
other unit.
14. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause
hazards.
15. Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious...

6
IMPORTANT SAFETY INSTRUCTIONS
19. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
(Replacement of the lamp only should be made
by users.)
20. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to...

7
CONNECTING AC POWER CORD
NOTE ON POWER CORD
AC Power Cord must meet requirement of country where you use a projector.
Confirm an AC plug type with chart below and proper AC Power Cord must be used.
If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
To POWER CORD
CONNECTOR on your
projector.
Projector sideAC Outlet side
Ground
To the AC Outlet.(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses nominal input voltages of 100-120 V or 200-240
V...

TABLE OF CONTENTS
TRADEMARKS
●Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
●IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
●Windows and PowerPoint are registered trademarks of Microsoft Corporation.
●Each name of corporations or products in the owners manual is a trademark or a registered trademark of its
respective corporation.
8
FEATURES AND DESIGN..............9
PREPARATION...

9
FEATURES AND DESIGN
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use.  This
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
technology.
◆Compatibility
This projector widely accepts various video and
computer input signals including;
●Computers
IBM-compatible or Macintosh computer up to 1280
x 1024 resolution.
●6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or...

10
PREPARATION
NAME OF EACH PART OF PROJECTOR
BOTTOM OF CABINET
BACK OF CABINET
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot.  When
using or installing a projector, following
precautions should be taken.
●Do not put a flammable object near this vent.  
●Keep rear grills at least 3’(1 m) away from
any object, especially heat-sensitive object.
●Do not touch this area, especially screws
and metallic parts.  This area will become
hot while a projector is used.
This projector detects internal...