Toshiba Projector Tlp X10u User Manual
Have a look at the manual Toshiba Projector Tlp X10u User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 71
71
CONTENTS
Adjustments &
Settings
1
12,3
3 2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
Preparation1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ.
28
Shutter
Camera
Picture
ContrastBrightnessSharpnessScreen sizeLevel
+6
00
[
ENTER]
Full...](http://img.usermanuals.tech/thumb/76/97192/w64_toshiba-tlp-x10u-manual_d-70.png "Page 71
71
CONTENTS
Adjustments &
Settings
1
12,3
3 2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
Preparation1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ.
28
Shutter
Camera
Picture
ContrastBrightnessSharpnessScreen sizeLevel
+6
00
[
ENTER]
Full...")
71 CONTENTS Adjustments & Settings 1 12,3 3 2 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Shutter Camera Picture ContrastBrightnessSharpnessScreen sizeLevel +6 00 [ ENTER] Full Thru 50Hz 60Hz MENUMENU EXIT QUICK Page Item Adjust Quit 00 Camera QUICK MENUContrast BrightnessAdjust the contrast of the image.Shutter Lamp power Keystone Input source setting Language +6 [ ENTER] [ ENTER] Hi Low50Hz 60Hz MENU EXIT FULL Item Adjust Quit Camera Factory reset modeReturn each item on the menu to factory default setting. Press the [ ENTER] button if you agree. Picture only All EXIT MENUQUICK Select Quit Page FULL MENU settings Ð Factory reset mode 12 Use the selection buttons ( / ) to display the ÒFactory reset modeÓ menu. Use the selection buttons ( / ) to select the setting items. Picture only: Reset only the adjustments and settings made on the ÒPictureÓ menus for the each input to the factory default setting. All: Reset all the adjustments and settings for all the inputs to the factory default setting. 3 You can return the adjusting or setting value to the factory default setting. MENUMENU Continued Remote controlControl panel (Main unit side) Press MENU twice.When pressed once, the QUICK MENU screen appears. When pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
72 CONTENTS Adjustments & Settings MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 5 4 5 4 TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER FULL MENU settings Ð Factory reset mode (continued) Press ENTER.The settings are reset to the factory default settings according to the conditions selected in step 3. 5Notes ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. ¥ When the ÒFactory reset modeÓ menu is executed, the adjustments and settings for all the inputs return to the factory default settings. (It is impossible to reset them for each input source.)4 After the settings are finished, press EXIT.The menu screen disappears. ENTERENTEREXITEXIT Remote controlControl panel (Main unit side)
73 CONTENTS Adjustments & Settings LASER 1 3 13 22 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Preparation1 Display the PIP sub-picture on the screen as explained in the step ÒDisplaying PIP Sub-picturesÓ. 37 PIPSource Size Position Audio Main SubSmall Large Video S-Video EXITQuit Item Set PIP menu setting Press MENU.When a PIP sub-picture is displayed, the PIP menu screen appears. 12 Use the selection buttons ( / ) to select the setting items, then press VOL/ADJ (+/ -) to set. After the settings are finished, press EXIT. The menu screen disappears. 3 You can make the PIP sub-picture settings and the sound settings when a PIP sub- picture is displayed. MENUMENUEXITEXIT Source: Set the PIP sub-picture input source.ÒVideo inputÓ or ÒS-video inputÓ can be selected.Size: Set the PIP sub-picture size.ÒSmallÓ or ÒLargeÓPosition: Set the display position of the PIP sub-picture.ÒUpper leftÓ, ÒUpper rightÓ, ÒLower leftÓ or ÒLower rightÓAudio: Set the audio input source.The sound of the selected picture (ÒMain pictureÓ or ÒSub-pictureÓ) is output from the speakers and the AUDIO OUT jack. Notes ¥ When the PIP sub-picture is turned off, the audio input source returns to the previous source (main picture). ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. Remote controlControl panel (Main unit side)
74 CONTENTS Document imaging camera Part names (of the document imaging camera model) CAUTION When using the camera, be careful to not pinch your hand or fingers into the arm. On the document imaging camera model, you can project pictures using the document imaging camera. The document imaging camera can directly project any materials (documents, illustrations, etc.) without using an OHP film. TEMPLAMP ONBUSY FAN ON/STANDBY KEYSTONESET AUTO AUTO EXIT ENTER MENUINPUT VOL/ADJ. STORE CAMERAARM LIGHT LOCKW.BALANCEGAIN FOCUS 77 76 81 79 79 7778 16 STORE IMAGE CAMERAARM LIGHT LOCK W.BALANCE CAMERAGAIN ArmCamera head Camera lens LED lightFocusing ring Camera control panel CAMERA GAIN (+/ -) button To adjust the camera gain. LOCK (W.BALANCE) indicator Lights when the white balance is locked. W.BALANCE button To switch white balance settings between automatic adjustment and lock. CAMERA button To select the camera source. Press again to return to the previous input source. STORE IMAGE button To store camera images into the memory card. ARM LIGHT button To turn on or off the light. Infrared remote sensor
75 CONTENTS Document imaging camera Notes ¥ Never give shocks or impacts to the camera or arm as this may cause malfunction. ¥ While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body. Preparation of the document imaging camera TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. TEMPLAMP ONBUSYFANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.PC CARD STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.PC CARD STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.PC CARD STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS 1) Raise up the arm. 7) Turn the light. 6) Pull up the light. 2) Stretch the arm. 3) Turn the arm. 4) Open the camera head. 5) Turn the camera head.Before preparations (stowed away)
76 CONTENTS Document imaging camera Picture projection with the document imaging camera TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAA R M L IG H TLOCKW .B A L A N C EGAIN FOCUS 1 LOCK STORE IMAGE CAMERAARM LIGHT W.BALANCE CAMERAGAIN CAUTION Do not look into the arm light while it is lit. Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Press ARM LIGHT.The light turns on. 1 ARM LIGHT Set a document to be projected.Place the document (illustrations, etc.) onto or around the projector, and turn the camera head to the direction of the document. 2 FOCUS TEMPLAMPONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS 123 123 123 123 FOCUS FOCUS 123 Continued Images on the screen Setting direction The arm and the camera head can be moved freely, so you can project the document if it is not placed on the projector. Camera control panel
77 CONTENTS Document imaging camera Press CAMERA to select the camera input mode.¥ You can also select it by pressing INPUT on the remote control or on the main unit. Set the input source on the menu screen when selecting by the INPUT button. 54 ¥ The CAMERA button can be used regardless of the input setting. ¥ ÒCameraÓ is displayed when the picture switches to the document imaging cameraÕs picture. 3 Continued CAMERAINPUTINPUT TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAA R M L IG H TLOCKW .B A L A N C EGAIN FOCUS 3 3 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMPLAMP ONBUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.ON/STANDBY LASER 3 LOCK STORE IMAGE CAMERAARM LIGHT W.BALANCE CAMERAGAIN Picture projection with the document imaging camera (continued) Move the camera head to adjust the size of the picture. 4 Focus on the picture by turning the focusing ring on the camera head. 5 TEMPLAMPONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS 123 Up: To reduce. Down: To enlarge.FOCUS Focusing ring Remote controlControl panel (Main unit side) Camera control panel
78 CONTENTS Document imaging camera Press CAMERA GAIN (+/-) to improve view of a camera subject which is too dark or vivid. 6Notes ¥ You can adjust the ÒSharpnessÓ of the camera image on the menu screen. 54 • If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light or set the “Shutter” from the menu screen. 54 Note that the image may still flicker due to the lighting, the document status, the image adjustment, etc., even if the “Shutter” setting is changed. CAMERAGAIN TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAA R M L IG H TLOCKW .B A L A N C EGAIN FOCUS 6 LOCK STORE IMAGE CAMERAARM LIGHT W.BALANCE CAMERAGAIN Picture projection with the document imaging camera (continued) When finished, turn off the light and close it, and put back the arm.Follow the steps of ÒPreparation of the document imaging cameraÓ in reverse. 7Notes ¥ Though this projector uses a 1.45 million pixel camera unit, the images projected on the screen are 1024 x 768 dot images. If the ÒScreen sizeÓ in the menu screen 54 is set to ÒFullÓ, the cameraÕs full image is compressed to 1024 x 768 dots. If ÒThruÓ is selected, the 1024 x 768 dots at the center of the image are projected. ¥ The light turns off automatically when the arm is leaned. ¥ When the arm is not raised up, the camera source cannot be projected. ¥ In the camera input selected, audio signals are not output. Camera control panel
79 CONTENTS Document imaging camera Normally, this camera automatically adjusts the color balance to project the picture. If the adjustment is not sufficient, follow the steps below to lock the white balance.1 Project a white paper and enlarge it to fill the screen. Notes ¥ If you raise up the arm while the camera input is selected, the color of the picture may vary for an instant due to the automatic white balance adjustment. This is not a malfunction. ¥ If you put back the arm and raise it up while the white balance is locked (the LOCK indicator is lit), the projector releases the white balance. Lock the white balance LOCK W.BALANCE TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS 2LOCK STORE IMAGE CAMERAARM LIGHT W.BALANCE CAMERAGAIN TEMPLAMPONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAARM LIGHTLOCKW.BALANCEGAIN FOCUS 2 Press W.BALANCE to turn the LOCK indicator on.The white balance is locked. To release the white balance, press W.BALANCE again to turn the LOCK indicator off. Camera control panel
80 CONTENTS Document imaging camera With the document camera operating, fully cover the camera lens with a piece of black paper or cloth. 1 Correcting illuminated defects Note Do not press ARM LIGHT and EXIT buttons simultaneously if the camera lens is not covered. Doing so will not only erase the white spot correction data already set but also result in parts that are displayed normally being corrected. Also be careful if the camera input mode is not selected. ARM LIGHT EXIT TEMPLAMP ONBUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.ON/STANDBYTEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ. STORE CAMERAA R M L IG H TLOCKW .B A L A N C EGAIN FOCUS 2 LOCK STORE IMAGE CAMERAARM LIGHT W.BALANCE CAMERAGAIN FOCUS Press ARM LIGHT on the camera control panel and EXIT on the projectorÕs control panel simultaneously.You can not use the remote control buttons. 2 Camera control panelControl panel (Main unit side) Press both sides Camera lens For the CCD image sensor used in the camera unit, in rare cases some of the pixels may be disturbed due to the influence of cosmic rays, etc. This disturbance may cause white spots to appear on the picture. If white spots appear on the document camera image, use the procedure described below to correct it.