Home > Toshiba > Projector > Toshiba Projector Tlp X10u User Manual

Toshiba Projector Tlp X10u User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Projector Tlp X10u User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							61
    CONTENTS
    Adjustments &
    Settings
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    5
    5 44
    TEMPLAMP ONBUSY FANON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    After the settings are finished, press EXIT.The menu screen disappears.
    EXITEXIT
    5
    Press VOL/ADJ (+/
    -) to adjust and set.
    4Notes
    ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
    made are automatically stored in the memory. If the power cord is unplugged or if a power
    failure occurs while the projector is on, the adjustments or settings are not stored in the
    memory.
    ¥ The ÒAudioÓ settings are applied to all the input sources.  (It is impossible to change the
    settings for each input source.)
    ¥ The settings do no affect on the audio output signals from the AUDIO OUT jack.
    ¥ If either the memory card input or the document imaging camera input mode (for models with
    document imaging camera) is selected, the sound is not developed.
    Speaker outputWhen set to ÒOff Ó, no sound is produced from the speakers.Channel selectL+R: The sound of the left and right channels is mixed and
    developed from the speakers.
    L: To develop only left input audio signal from the speakers.
    R: To develop only right input audio signal from the speakers.LoudnessWhen set to ÒOnÓ, the loudness effect is added to the speaker
    sound.
    FULL MENU settings Ð Audio (continued)Remote controlControl panel
    (Main unit side) 
    						
    							62
    CONTENTS
    Adjustments &
    Settings
    1
    12,3
    3 2
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP
    ONBUSYFANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    Preparation1
    Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
    28
    Y/PB/PR
    Contrast
    Brightness
    Color
    Tint
    Sharpness
    Signal format
    Screen size
    Level
    +6
    0
    0
    0
    0
    [
    ENTER]
    [
    ENTER]
    Full WideThru
    MENUMENUPictureMENUEXITQUICK
    Page
    Item
    Adjust
    Quit
    Color
    +6000
    MENU
    EXIT
    QUICK MENUContrast
    BrightnessAdjust the contrast of the image.Lamp power KeystoneInput source settingLanguage[
    ENTER] [
    ENTER] Hi LowFULL Item Adjust Quit
    Y/PB/PR
    Y/PB/PR
    Keystone
    Keystone
    Horizontal reference value reset
    0
    [
    ENTER]
    MENU
    EXIT
    QUICK
    Page
    Item
    Adjust
    Quit
    FULL MENU settings Ð Keystone
    1
    MENUMENU
    2
    Use the selection buttons (
     / 
    ) to display the
    ÒKeystoneÓ menu.
    Use the selection buttons (
     / 
    ) to select the
    setting items.
    3
    ¥ If the screen is not installed vertically, you can adjust
    the keystone distortion manually.
    ¥ The projector stores the standard conditions of
    horizontal installation, but depending on the usage
    environment (if the projector is subject to vibrations
    or shock, etc.), the standard may change.  If the
    keystone distortion is not properly corrected when
    the AUTO KEYSTONE button is pressed with the
    screen installed vertically, set the projector on a flat
    surface then use the menu screenÕs ÒHorizontal
    reference value resetÓ function.
    Continued
    Remote controlControl panel
    (Main unit side)
    Press MENU twice.When pressed once, the QUICK MENU screen appears. When
    pressed twice, the ÒPictureÓ screen of the FULL MENU appears. 
    						
    							63
    CONTENTS
    Adjustments &
    Settings
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    5
    5
    4-a
    4-a4-b
    4-b
    TEMPLAMP
    ONBUSYFANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    Y/PB/PR
    KeystoneRecalibrate the horizontal reference value
    for keystone.
    Are you sure ?
    Ye s
    No
    Horizontal referrence value reset
    MENU
    EXIT
    QUICK
    Select Back
    ENTEREnter
    FULL MENU settings Ð Keystone (continued)
    When selecting ÒKeystoneÓ  in step 3.
    Press VOL/ADJ (+/
    -) to adjust and set.
    (-) (+)
    Keystone:
    To reduce the lower width To reduce the upper width
    Notes
    ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are
    automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the
    projector is on, the adjustments or settings are not stored in the memory.
    ¥ The ÒKeystoneÓ adjustments and settings are applied to all the input sources.  (It is impossible to store
    different adjustments and settings for each input source.)When selecting ÒHorizontal reference value resetÓ  in step 3.4-b
    Press ENTER.The sub-menu of ÒHorizontal reference value resetÓ appears.Use the selection buttons (
     / 
    ) to select
    ÒYesÓ and press ENTER.
    The horizontal reference value is reseted.
    4-a5
    After the adjustments and settings are finished,
    press EXIT several times until the menu screen
    disappears.Press the EXIT button once when the FULL MENU is
    displayed, press twice when the sub menu is displayed.
    EXITEXITENTERENTERENTERENTER
    Remote controlControl panel
    (Main unit side) 
    						
    							64
    CONTENTS
    Adjustments &
    Settings
    1
    12,3
    3 2
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP
    ONBUSY
    FANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    Preparation1
    Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
    28
    Memory card
    Contrast
    Brightness
    Input select mode
    Auto. demo
    Slide show
    Interval
    Screen size
    Level
    +6
    0
    [
    ENTER]
    [
    ENTER]
    Full ThruManual Auto.Off OnManual Auto.
    PictureMENUMENU
    EXIT
    QUICK
    Page
    Item
    Adjust
    Quit
    Memory card
    +600
    MENU
    EXIT
    QUICK MENUContrast
    BrightnessAdjust the contrast of the image.Picture mode
    Lamp power KeystoneInput source settingLanguage[
    ENTER] [
    ENTER] [
    ENTER]
    Hi Low Off OnFULL Item Adjust QuitAuto. demo
    Memory card
    Display
    LanguageNo signal backgroundIconMenu positionMenu background translucentStart-up screen
    Press the [
    ENTER]On Off
    Logo
    None
    Blue backgroundOn OffOn Off
    MENU
    EXIT
    QUICK
    Item
    Quit
    Page
    FULL MENU settings Ð Display
    You can set the language, menu display and
    start-up screen, etc.
    1
    MENUMENU
    2
    Use the selection buttons (
     / 
    ) to display the
    ÒDisplayÓ menu.
    Use the selection buttons (
     / 
    ) to select the
    setting items.
    3
    Continued
    Remote controlControl panel
    (Main unit side)
    Press MENU twice.When pressed once, the QUICK MENU screen appears. When
    pressed twice, the ÒPictureÓ screen of the FULL MENU appears. 
    						
    							65
    CONTENTS
    Adjustments &
    Settings
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    4-a
    4-a
    TEMPLAMP ONBUSYFA NON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    Memory card
    Display
    Language
    MENU
    EXIT
    QUICK
    SelectBack
    When selecting ÒLanguageÓ in step 3.
    Press ENTER.The sub-menu of ÒLanguageÓ appears.Use the selection buttons (
     / 
    ) to select a
    language.
    Press EXIT to return to the FULL MENU.
    : English
    : French
    : German
    : Italian
    : Spanish
    : Portuguese
    : Japanese
    : Chinese (Simplified)
    : Chinese (Traditional)
    : Korean
    English
    Français
    Deutsch
    Italiano
    Español
    Português
    ENTERENTEREXITEXIT
    FULL MENU settings Ð Display (continued)
    Continued
    4-a
    Remote controlControl panel
    (Main unit side) 
    						
    							66
    CONTENTS
    Adjustments &
    Settings
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    5
    5
    4-b
    4-b
    TEMPLAMP
    ONBUSYFANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    FULL MENU settings Ð Display (continued)
    After the settings are finished, press EXIT.The menu screen disappears.
    EXITEXIT
    5
    Press VOL/ADJ (+/
    -) to adjust and set.
    Notes
    ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
    made are automatically stored in the memory. If the power cord is unplugged or if a power
    failure occurs while the projector is on, the adjustments or settings are not stored in the
    memory.
    ¥ The ÒDisplayÓ settings are applied to all the input sources. (It is impossible to store different
    settings for each input source.)
    No signal background (Setting of screen of no signal input)Logo: The TOSHIBA logo screen is displayed.Blue background:
    The entire screen is blue.
    None: The screen is black.
    IconWhen set to ÒOff Ó, the icons displayed normally when the input is
    changed or other operations are performed, are no longer displayed.Menu positionSelect the position where the menu is displayed (ÒUpper leftÓ, ÒUpper
    rightÓ, ÒBottom leftÓ or ÒBottom rightÓ).Menu background translucentWhen set to ÒOnÓ, the menu background becomes translucent.Start-up screenWhen set to ÒOnÓ, the opening screen is displayed when the power is
    turned on.
    4-bWhen selecting setting items other than ÒLanguageÓ in step 3.
    Remote controlControl panel
    (Main unit side) 
    						
    							67
    CONTENTS
    Adjustments &
    Settings
    1
    12,3
    3 2
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    Preparation1
    Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
    28
    Digital RGB
    Picture
    Contrast
    BrightnessPositionPicture mode
    Screen sizeLevel
    +6
    0
    [
    ENTER]
    [
    ENTER]
    Bright
    True color
    Full
    Thru
    PhaseFrequency
    MENUMENU
    EXIT
    QUICK
    Page
    Item
    Adjust
    Quit
    Digital RGB
    00 +6
    MENU
    EXIT
    QUICK MENUContrast
    BrightnessAdjust the contrast of the image.Picture mode
    Lamp power KeystoneInput source settingLanguage[
    ENTER] [
    ENTER] Hi Low Bright
    True color
    FULL Item Adjust QuitPhase
    Digital RGB
    Default setting
    Input source setting
    Projection modeNo signal power offPower onLamp power
    [
    ENTER]
    [
    ENTER]
    Off
    5 min.
    Manual
    Auto.
    High
    Low
    MENU
    EXIT
    QUICK
    Item
    Quit
    Page
    12
    Use the selection buttons (
     / 
    ) to display the
    ÒDefault settingÓ menu.
    Use the selection buttons (
     / 
    ) to select the
    setting items.
    3
    MENUMENU
    FULL MENU settings Ð Default setting
    You can set the input source which can be
    selected by the INPUT button; you can also
    set the projection mode, power off at no
    signal status, power on mode and lamp
    power.
    Continued
    Remote controlControl panel
    (Main unit side)
    Press MENU twice.When pressed once, the QUICK MENU screen appears. When
    pressed twice, the ÒPictureÓ screen of the FULL MENU appears. 
    						
    							68
    CONTENTS
    Adjustments &
    Settings
    LASER
    4-a 4-a 4-a 4-a
    4-a 4-a 4-a
    4-a
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    Digital RGB
    Default setting
    COMPUTER-1
    COMPUTER-2VideoMemory cardCameraS-video
    Analog RGB(
    1)
    Y/PB/PR
    Analog RGB(
    2)
    Digital RGB
    Input source setting
    MENU
    EXIT
    Change Back
    ENTERSet
    QUICK
    Item
    When selecting ÒInput source settingÓ in step 3. (Set the input that can be selected using
    INPUT button.)
    Use the selection buttons (
     / 
    ) to select the
    input source to be set, then press ENTER to
    check it.
    ¥  The check turns on and off each time the ENTER button is
    pressed.
    ¥ When a check box is checked, that input source can be
    selected by the INPUT button.(When selecting COMPUTER-1 and COMPUTER-2)Press VOL/ADJ (+/
    -) to select the type of input
    source.
    The setting whose button is displayed in yellow is the one
    currently set.Press EXIT to return to the FULL MENU. Press ENTER.The sub-menu of ÒInput source settingÓ appears.
    Notes
    ¥ It is impossible to exit from the menu if no input source is selected.
    ¥ If the check in the check box for the currently selected source is removed, the setting becomes
    effective the next time the input is changed.
    ¥ For the memory card and document imaging camera, there are modes in which these can be
    selected even if their check box is not checked. 
    56
     77Menu items Main unit indication
    COMPUTER-1 COMPUTER IN 1
    COMPUTER-2
    COMPUTER IN 2
    Video VIDEO
    S-video S-VIDEO
    Memory card
    Camera
    Document imaging camera 
    (For the model with camera)
    ENTERENTER
    ENTERENTER
    EXITEXIT
    FULL MENU settings Ð Default setting (continued)
    Continued
    4-a
    Remote controlControl panel
    (Main unit side) 
    						
    							69
    CONTENTS
    Adjustments &
    Settings
    LASER
    4-b 4-b 4-b
    4-b 4-b 4-b
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    Digital RGB
    Default setting
    Standard
    RearCeilingRear
     ceiling
    Projection mode
    MENU
    EXIT
    QUICK
    Select
    Back
    Digital RGB
    Default setting
    Standard
    RearCeilingRear
     ceiling
    Projection mode
    MENU
    EXIT
    QUICK
    Select
    Back
    FULL MENU settings Ð Default setting (continued)
    When selecting ÒProjection modeÓ in step 3.
    Press ENTER.The sub-menu of ÒProjection modeÓ appears.Use the selection buttons (
     / 
    ) to select the
    projection mode.
    Select the installation position of the projector. Confirm by
    referring to the chart on page 
    17
     21
    .
    Standard: Floor-mounted front projection
    Rear: Floor-mounted rear projection
    Ceiling: Ceiling-mounted front projection
    Rear ceiling: Ceiling-mounted rear projection
    Press EXIT to return to the FULL MENU.
    ENTERENTEREXITEXIT
    Continued
    4-b
    Remote controlControl panel
    (Main unit side) 
    						
    							70
    CONTENTS
    Adjustments &
    Settings
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    5
    5
    4-c
    4-c
    TEMPLAMP ONBUSY FANON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    After the settings are finished, press EXIT.The menu screen disappears.
    EXITEXIT
    5
    Press VOL/ADJ (+/
    -) to set.
    Notes
    ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
    made are automatically stored in the memory. If the power cord is unplugged or if a power
    failure occurs while the projector is on, the adjustments or settings are not stored in the
    memory.
    ¥ The settings of ÒDefault settingÓ are applied to all the input sources. (It is impossible to store
    different settings for each input source.)
    No signal power offOFF: The power does not turn off automatically even if the no
    signal status continues.
    5 min.: The power turns off automatically if the no signal status
    continues for approx. 5 min.Power onManual: The power turns on by pressing the ON/STANDBY button.
    Auto: When the power cord is plugged, the power turns on.
    Press the ON/STANDBY button when turns power off. 
    31
    Lamp powerHi: Set the lamp mode with brightness priority.
    Low: Restrict the lamp output to reduce the cooling sound.
    When selecting “No signal power off ”, “Power on” or “Lamp power” in step 3.
    Note
    The cooling sound changes according to the temperature inside the projector.  When the
    lamp power setting is changed, the brightness changes immediately, but the cooling sound
    level does not change immediately.
    FULL MENU settings Ð Default setting (continued)
    Remote controlControl panel
    (Main unit side)
    4-c 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Projector Tlp X10u User Manual