Home > Toshiba > Projector > Toshiba Projector Tlp X10u User Manual

Toshiba Projector Tlp X10u User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Projector Tlp X10u User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41
    Operations
    CONTENTS
    Projecting images stored in a memory card (continued)
    When using the memory card function for the first time,
    set the ÒInput source settingÓ on the menu screen.With the factory default setting, it is impossible to select the memory card
    input by the INPUT button. Change the setting following the instructions of
    ÒQUICK MENU Adjustments and SettingsÓ 
    48
     to make the memory card
    input selectable.
    Insert the memory card into the
    card slot.Insert the card securely, pressing it as far as it
    can go.
    Be careful to insert the card in the proper
    direction. The slot is designed so that it is
    difficult to insert cards in the wrong direction.
    Inserting the card forcibly may deform the
    internal terminals or cause other problems.
    12
    Analog RGB(
    1)
    QUICK MENUMENU
    EXIT
    FULL
    Item
    Change Back
    ENTERSet
    COMPUTER-1
    COMPUTER-2VideoMemory cardCameraS-video
    Analog RGB(
    1)
    Y/PB/PR
    Analog RGB(
    2)
    Digital RGB
    Input source setting
    TEMPLAMPONBUSYFA N
    ON/STANDBY
    EXIT ENTER
    MENUINPUT
    InssertUp side
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSYFA NKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.
    3
    3
    3
    TEMPLAMP ONBUSYFA NON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    2
    INPUTINPUTBUSY
    (Light in orange)
    3
    Press INPUT repeatedly to select the memory
    card input.The ÒMemory cardÓ input display 
     appears on the screen.
    ¥ Start to read the data on the memory card and display the
    image data sequentially as thumbnails.
    ¥ The BUSY indicator lights in orange while the memory card is
    being accessed. (Do not eject the memory card while the
    BUSY indicator is lit.) Check ÒMemory cardÓ.
    Continued
    Remote controlControl panel
    (Main unit side)
    BUSY
    indicator 
    						
    							42
    Operations
    CONTENTS
    Description of screen
    34
    Continued
    ENTER
    EXIT
    Enter
    SelectABCDEFGH.jpg
    Up
    Next
    Back
    Display when there has 
    a previous page.Display the name of folder or file selected.
    Operation guideDisplay when there has 
    a following page.
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTTEMPLAMP ONBUSYFA NON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    4
    VOL/ADJ.
    4
    VOLUME/ADJUST
    Projecting images stored in a memory card (continued)
    The illustration below is an example for explanation purpose
    only. The actual display, the number of directory, etc., differs
    depending on the data stored in the memory card.
    ¥ When the memory card is
    inserted, its root directory
    (the topmost level) is
    displayed first.
    ¥
     indicates folders.
    There may be other folders
    or files inside folders.
    (Multiple directory)
    ¥ Small images are called
    thumbnails. JPEG files are
    displayed as thumbnails.
    ¥ The numbers in the circles
    are not displayed.
    1, 
    2: Folders containing JPEG files
    3: Folders which may contain JPEG files in lower directory
    4: Folders not containing JPEG files
    5: 
    Folders with camera images stored. (For the models with document imaging camera)
    6 to 
    i: JPEG files stored in the currently displayed directory
    o: JPEG files that cannot be displayed as thumbnails
    ;: Files not compatible
    6: The orange frame indicates the currently selected JPEG file
    Use VOL/ADJ (+/
    -) to change pages. (Page
    changing)
    When an icon (
     or 
    ) is displayed to indicate that there is a
    previous or following page, use the VOL/ADJ (+/
    -) buttons to
    change pages and search for the desired thumbnails or folders.
    (Continued)
    Remote controlControl panel
    (Main unit side)
    The icon 
     appears during image data
    processing. 
    						
    							43
    Operations
    CONTENTS
    Use the selection buttons (
     / 
     / 
     / 
    ) to
    select the thumbnail you wish to display as a
    slide. (Thumbnail selection)
    ¥ The selected thumbnail is surrounded by an orange frame.
    ¥ If the desired file (thumbnail) is in a different folder, select that
    folder.Press ENTER. (Slide display)¥ When a thumbnail is selected, that image is displayed as a
    slide (a large picture).
    ¥ When a folder is selected, the contents of that folder are
    displayed as thumbnails in the same way as in step 3 above.
    In this case, return to step 5 or 4.When a folder is selected, repeat steps 5 and 6 until the desired
    thumbnail is displayed. The maximum number of folder directory
    levels that can be searched through at this time is within 5 levels
    from the root directory (up to 5 levels of folders).
    5678
    6 8
    6 8
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTTEMPLAMP
    ONBUSY FANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    5
    5
    7
    VOL/ADJ.
    7
    VOLUME/ADJUSTLASER
    ENTERENTEREXITEXIT
    Projecting images stored in a memory card (continued)
    Press VOL/ADJ (+/
    -). (Slide transition)
    ¥ Press the (+) button to display the next slide.
    ¥ Press the (
    -) button to display the previous slide.
    You can only change the JPEG files stored in the same
    directory level (including the previous and following pages) by
    the VOL/ADJ (+/
    -) buttons.
    Press EXIT.The display returns to as it was in step 3.
    If you have searched to the bottommost level in step 5,
    pressing the EXIT button repeatedly moves the display
    sequentially back up to higher levels until the contents of the
    root directory are displayed.
    Continued
    Remote controlControl panel
    (Main unit side) 
    						
    							44
    Operations
    CONTENTS
    EMPLAMPONFA N
    ON/STANDBY
    EXIT ENTER
    MENUINPUT
    Press
    To eject the memory cardTo eject a memory card, first check that the
    BUSY indicator is off, then press the card
    slotÕs eject button. The memory card pops out
    part way, then pull it out by hand.
    Projecting images stored in a memory card (continued)
    Notes
    ¥ In the memory card input mode, you can perform the operations
    described below using the menu screen settings.¥ Automatic input selection function
    When ÒInput select modeÓ 
    54
     is set to ÒAuto.Ó, the mode automatically
    switches to the memory card input mode when a memory card is inserted.
    ¥ Auto slide show 1
    When ÒAuto. demoÓ 
    48
     is set to ÒOnÓ and a memory card is loaded, a
    slide show of the JPEG files in the root directory starts automatically when
    the memory card input mode is selected.
    ¥ Auto slide show 2
    When ÒSlide showÓ 
    54
     is set to ÒAuto.Ó, a slide show starts automatically
    at the place where the leading thumbnail appointed in the step 6.
    ¥ Auto slide show 3
    When ÒInput select modeÓ is set to ÒAuto.Ó, ÒAuto. demoÓ is set to ÒOnÓ and
    memory card is loaded, a slide show of the JPEG files in the root directory
    starts automatically when the power is turned on. When ÒPower onÓ 
    67
    is set to ÒAuto.Ó, the slide show starts when the power cord is plugged into
    an outlet.
    Press the EXIT button to stop the automatic slide show.
    * In this manual, ÒSlide showÓ means the operation by which slides (large
    images) are displayed in sequence.¥ With the factory default settings, the followings are set for manual
    operation.
    Input selection mode:
    Manual
    Auto. demo: Off
    Slide show: Manual
    Power on: Manual
    ¥ You can select the interval time of automatic slide show transition among
    four types on the menu screen. 
    48
      Depending on the compression
    format of the JPEG files, however, it may take more than the set time to
    transit images.
    ¥ Depending on the compression format of the JPEG files and the file
    sizes, it may take a time for page changing or slide transition.
    ¥ The sort order (thumbnail displaying order = slide show order) of JPEG
    files is in character number order. When the number of characters is the
    same, the sort order is arranged by the numerical characters used in
    each file name at first and then the alphabetical characters. 
    						
    							45
    CONTENTS
    Adjustments &
    Settings
    ¥ The menu screens for making various adjustments and settings include a QUICK MENU for frequently used adjustments and settings and a FULL
    MENU for all the adjustments and settings.  The FULL MENU is divided into six sections by function: ÒPictureÓ, ÒAudioÓ, ÒKeystoneÓ, ÒDisplayÓ, ÒDefault
    settingÓ and ÒFactory reset modeÓ.
    ¥ The items in the ÒPictureÓ and ÒAudioÓ sections of the QUICK MENU and FULL MENU differ depending on the input source.
    ¥ Some of the adjustments and settings are stored separately for different input sources, others are applied to all input sources when they are set for one.
    For details, refer to the pages on which the individual adjustment and setting instructions are located.
    Adjustments and settings on the menu screenContrast
    Brightness
    Phase
    Picture mode
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Phase
    Frequency
    Position
    Picture mode
    Screen size
    LevelSpeaker output
    Channel select (Mini)
    Loudness (Mini)KeystoneHorizontal reference value reset
    Contrast
    Brightness
    Picture mode
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Position
    Picture mode
    Screen size
    LevelSpeaker output
    Channel select (Mini)
    Loudness (Mini)KeystoneHorizontal reference value reset
    Contrast
    Brightness
    Color
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Color
    Tint
    Sharpness
    Signal format
    Screen size
    LevelSpeaker output
    Channel select (Mini)
    Loudness (Mini)KeystoneHorizontal reference value reset
    Contrast
    Brightness
    Color
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Color
    Tint
    Sharpness
    Video mode
    Screen size
    LevelSpeaker output
    Channel select (RCA)
    Loudness (RCA)
    There is no audio signal 
    in this input.
    There is no audio signal 
    in this input.
    KeystoneHorizontal reference value reset
    Contrast
    Brightness
    Auto. demo
    Interval
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Input select mode
    Auto. demo
    Slide show
    Interval
    Screen size
    LevelKeystoneHorizontal reference value reset
    Contrast
    Brightness
    Shutter
    Keystone
    Lamp power
    Input source setting
    LanguageLanguage
    No signal background
    Icon
    Menu positionMenu background translucentStart-up screenPicture only
    AllInput source setting
    Lamp power
    Projection mode
    No signal power off
    Power onContrast
    Brightness
    Sharpness
    Shutter
    Screen size
    LevelKeystoneHorizontal reference value reset
    Digital RGB
    Memory card
    Document imaging camera(With camera model)
    Y/P
    B/PR
    Analog RGB 1
    Analog RGB 2
    Video
    S-video
    FULL MENUQUICK MENU
    Picture Picture Picture Picture Picture Picture
    Audio Audio Audio Audio Audio Audio
    Keystone Keystone Keystone Keystone Keystone Keystone
    Display Display Display Display Display Display
    Default setting Default setting Default setting Default setting Default setting Default setting
    Factory reset mode Factory reset mode Factory reset mode Factory reset mode Factory reset mode Factory reset mode
    Continued 
    						
    							46
    CONTENTS
    Adjustments &
    Settings
    Adjustments and settings on the menu screen (continued)
    4854
    6062646771
    QUICK MENU
    Item Meaning
    Contrast Adjust the image contrast
    Brightness Adjust the image brightness (paying attention to the dark parts)
    Color Adjust the image color (except for RGB inputs)
    Phase Adjust the image flicker (analog RGB)
    Picture mode Set brightness priority or picture quality (color) priority (RGB)
    Auto. demo Set the automatic slide show function on and off (memory card)
    Interval
    Set the interval time to transit the automatic slide show (memory card)
    Shutter Set the shutter speed (document imaging camera)
    Keystone Adjust keystone distortion
    Lamp power Set the lamp power (cooling sound selection)
    Input source setting Set the input mode selected by the INPUT button
    Language Set the display language used for menus and messagesFULL MENU
    Picture
    Item Meaning
    Contrast Adjust the image contrast
    Brightness Adjust the image brightness 
    Color Adjust the image color
    Tint Adjust the image tint
    Sharpness Adjust the image sharpness
    Phase Adjust the image flicker (dot clock timing adjustment)
    Frequency
    Adjust the vertical stripes with detailed images (dot clock frequency adjustment)
    Position Adjust the horizontal and vertical positions of the image
    Level Adjust the red, green and blue level (balance)
    Picture mode Set brightness priority or picture quality (color) priority
    Video mode Set the video or S-video color system
    Signal format Set the Y/P
    B/PR signal DTV format
    Screen size
    Set whether to convert to XGA size or display with the input resolution
    Input select mode Set the input selection Auto./Manual at memory card detection
    Auto. demo Set the automatic slide show On/Off at memory card detection 
    Slide show Set slide show advancing Auto./Manual
    Interval Set the interval time to transit the automatic slide show
    Shutter Set the shutter speed according to the power supply frequency
    Audio
    (Adjust the audio output from the speaker on the main unit)
    Item Meaning
    Speaker output Set the speaker output On/Off
    Channel select (RCA)
    Select the channel of AUDIO (L/R) jack in VIDEO IN
    Loudness (RCA) Set the loudness of AUDIO (L/R) jack On/Off in VIDEO IN
    Channel select (Mini)
    Select the channel of AUDIO IN jack
    Loudness (Mini) Set the loudness of the AUDIO IN jack On/Off 
    DisplayItem Meaning
    Language Set the display language used for menus and messages
    No signal background
    Set the background at no signal input
    Icon Set the icon display On/Off
    Menu position Set the position of the menu screen
    Menu background translucent
    Set the menu background translucent On/Off
    Start-up screen Set the start-up screen at power on
    Default setting
    Item Meaning
    Input source setting Set the input mode selected by the INPUT button
    Projection mode Set the direction of the screen according to the projection mode
    No signal power off
    Set the automatic power off function On/Off when no signal status continues
    Power on Set the power on On/Off when plugging the power cord
    Lamp power Set the lamp power (cooling sound selection)
    Keystone
    Item Meaning
    Keystone Adjust the Keystone distortion
    Horizontal reference value reset
    Reset the horizontal reference value for the automatic adjustment
    Factory reset mode
    Item Meaning
    Picture only
    Return the items of the picture menu to the factory default setting for each input source.
    All
    Return all of the items to the factory default setting for all input sources.
    Note
    An exclusive menu is displayed when making PIP function sub-picture settings. 
    73 
    						
    							47
    CONTENTS
    Adjustments &
    Settings
    Operating the menu screen
    Analog RGB(
    1)
    000 +6
    MENU
    EXIT
    QUICK MENUContrast
    BrightnessAdjust the contrast of the image.Picture mode
    Lamp power KeystoneInput source settingLanguage[
    ENTER] [
    ENTER] Hi Low Bright
    True color
    FULL Item Adjust QuitPhase
    Analog RGB(
    1)
    QUICK MENU
    MENU
    EXIT
    FULL
    Item
    Change Back
    ENTERSet
    COMPUTER-1
    COMPUTER-2VideoMemory cardCameraS-video
    Analog RGB(
    1)
    Y/P
    B/PR
    Analog RGB(
    2)
    Digital RGB
    Input source setting
    Analog RGB (
    1)
    Contrast
    Brightness
    Phase
    Frequency
    Position
    Picture mode
    Screen size
    Level
    +6
    0
    0
    [
    ENTER]
    [
    ENTER] Bright True color
    Full Thru
    MENUPictureMENUMENUEXITQUICK
    Page
    Item
    Adjust
    Quit
    0
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALLRESIZE
    VOLUME/ADJUST
    TEMPLAMP ONBUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.ON/STANDBY
    MENUMENU
    MENUMENU
    ENTERENTER
    EXITEXIT
    MENUMENU
    VOL/ADJSelectionMENU ENTER
    EXIT
    Press the MENU button to display the QUICK MENU.
    The FULL MENU appears when the 
    MENU button is pressed.
    Press the EXIT button to end the adjust-
    ments and settings and turn the menu off.
    Adjustments and settings that have been made here are 
    automatically stored in the memory when the power is 
    turned off by the ON/STANDBY button. Use the VOL/ADJ (+/-) buttons to 
    adjust or set the selected items.When the MENU button is pressed in the 
    FULL MENU mode, the QUICK MENU 
    reappears.
    The first menu displayed in the 
    FULL MENU mode is the “Picture” menu.
    The sub-menus include items that are set by 
    pressing the ENTER button.
    When a sub-menu is displayed, it will return to 
    the previous menu by pressing the EXIT button.
    Sub-menu (example: input setting)
    Input source name
    Adjustment display bar
    Displayed for adjustable items
    Setting display buttons
    In the QUICK MENU screen, simple explanations 
    of the selected items are displayed.Displayed for items set by selection.
    The setting displayed in yellow is the 
    one currently set. Selected item (orange)
    The button operation guide is displayed here.
    The contents of the operation guide differ 
    according to the type of menu and the selected item.There are also items with sub-menus 
    displayed by pressing the ENTER button.
    Some items in the FULL MENU 
    have sub-menus.
    Start
    Use the selection buttons (    /    ) to 
    select the item to be adjusted or set.
    Each press of the selection buttons (   /   ) 
    change the menus as shown:
    [Factory reset mode]      [Default Settings] 
    [Picture]      [Audio]      [Keystone]      [Display]
    End 
    						
    							48
    CONTENTS
    Adjustments &
    Settings
    Preparation1
    Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
    28
    Press MENU.The QUICK MENU appears.
    1
    You can set the basic setting used frequently.
    QUICK MENU adjustments and settings
    LASER
    1
    1
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP
    ONBUSYFANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    Analog RGB(
    1)
    000 +6
    MENU
    EXIT
    QUICK MENUContrast
    BrightnessAdjust the contrast of the image.Picture mode
    Lamp power KeystoneInput source settingLanguage[
    ENTER] [
    ENTER] Hi Low Bright
    True color
    FULL Item Adjust QuitPhase
    MENUMENU
    ¥ To cancel the QUICK MENU
    screen, press the EXIT button.
    ¥ The contents of the menu are
    different depending on the type
    of input source currently
    selected.
    Continued
    Remote controlControl panel
    (Main unit side) 
    						
    							49
    CONTENTS
    Adjustments &
    Settings
    2
    2
    LASER
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP
    ONBUSY FANON/STANDBY
    KEYSTONESET AUTO
    AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    QUICK MENU adjustments and settings (continued)
    Use the selection buttons (
     / 
    ) to select the
    adjustment and setting items.
    The types of adjustment and setting items are different
    depending on the type of input source currently selected.
    (See the table below.)
    2Note
    The ÒKeystoneÓ adjustment and the ÒLamp PowerÓ, ÒInput source settingÓ and ÒLanguageÓ
    settings are applied to all the input sources.  (It is impossible to make different settings for
    each input source.)
    Other items marked ÒOÓ can be adjusted or set respectively for the different input sources.
    Adjustments
    Inputs
    Items
    Analog RGB1 Analog RGB2 Digital RGB Y/P
    B/PR
    Video S-video Memory Card
    oooooooo
    oooooooo
    xxxoooxx
    ooxxxxxx
    o
     (same for all of the inputs)
    Analog RGB1 Analog RGB2 Digital RGB Y/P
    B/PR
    Video S-video Memory Card
    oooxxxxx
    o
     (same for all of the inputs)
    o (same for all of the inputs)
    o (same for all of the inputs)
    xxxxxxox
    xxxxxxox
    xxxxxxxo
    Settings
    Inputs
    Items
    o: Adjustable
      x: Not displayed Contrast
    Brightness
    Color
    Phase
    Keystone
    Document 
    Imaging Camera
    Document 
    Imaging Camera
    Picture mode
    Lamp powerInput source settingLanguage
    Auto. demo
    Interval
    Shutter
    o: Adjustable
      x: Not displayedContinued
    Remote controlControl panel
    (Main unit side) 
    						
    							50
    CONTENTS
    Adjustments &
    Settings
    3-a
    3-a
    MENUON/STANDBY INPUT
    L-CLICK R-CLICK
    ENTERKEYSTONE
    AUTO
    SET
    EXIT
    PIPFREEZEMUTE CALL
    RESIZE
    VOLUME/ADJUST
    TEMP
    LAMP ON
    BUSY FANKEYSTONESET AUTO AUTO
    EXIT ENTER
    MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY
    KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
    VOL/ADJ.ON/STANDBY
    LASER
    3-a
    Press VOL/ADJ (+/
    -) to adjust and set.
    Adjustments
    Buttons
    Items
    (-) (+)
    Contrast Lower Higher
    Brightness Darker Brighter
    Color Thinner Deeper
    Phase Adjust flickers Adjust flickers
    Keystone Reduce the lower width Reduce the upper width
    Settings
    Picture mode (Analog RGB input, digital RGB input)Bright: Set the picture with its brightness priority.
    True color: Set the picture with its quality (color) priority.Lamp powerHi: Set the lamp mode with brightness priority.
    Low: Restrict the lamp output to reduce the cooling sound.Auto. demo (Memory card input)On: When a memory card is detected while the memory card
    input mode is selected, a slide show using the image data in
    the root directory starts automatically.Shutter (Document imaging camera input)Set to the frequency (50/60 Hz) of the power supply in your area.
    Note
    The cooling sound changes according to the temperature inside the projector.  When the
    lamp power setting is changed, the brightness changes immediately, but the cooling sound
    level does not change immediately.
    QUICK MENU adjustments and settings (continued)
    Continued
    Remote controlControl panel
    (Main unit side)
    When selecting ÒContrastÓ, ÒBrightnessÓ, ÒColorÓ, ÒPhaseÓ, ÒKeystoneÓ, ÒPicture modeÓ,
    ÒLamp powerÓ, ÒAuto. demoÓ or ÒShutterÓ in step 2. 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Projector Tlp X10u User Manual