Toshiba Projector Tlp 780U User Manual

51
Adjustments &
Settings
Reset
The settings of FULL MENU [Default setting] are returned to the factory default setting
EXEC.
Projection mode
Standard
The projector placement is set to the floor-mounted front projection mode
SET
Rear
The projector placement is set to the floor-mounted rear projection mode
SET
Ceiling
The projector placement is set to the ceiling-mounted front projection mode
SET
Rear ceiling
The projector placement is set to the ceiling-mounted rear projection mode
SET
No signal...

52
Adjustments &
Settings
Reset all The adjustments and settings of all menus are returned to the factory default setting
EXEC.
H-reference reset The horizontal reference value for Auto. V-keystone is calibrated automatically
EXEC.
FULL MENU settings - Reset
• If the projectors foot adjuster is used or the projector is inclided, H-reference reset will not be executed properly.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button.  If the power...

53
Adjustments &
Settings
Reset
The settings of PIP MENU are returned to the factory default setting
EXEC.Selecting the signal source for PIP sub-pictureSetting of the PIP sub-picture size
Source
: Video input is selected as signal source
SET
Video
: S-Video input is selected as signal source
SET
S-VideoSize
: The PIP sub-picture size is set to small
SET
Small
: The PIP sub-picture size is set to middle
SET
Middle
Selecting the audio input source
Audio
: The main pictures sound is developed from the...

54
Document
imaging camera
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
OVERLAY
CAMERAARM LIGHT
LOCK
W.BALANCE
CAMERAGAIN
Part names (of the document imaging camera model)
CAUTION
When using the camera, be careful not to
pinch your hand or fingers into the arm.
On the document imaging camera model, you can
project pictures using the document imaging camera.
The document imaging camera can directly project any
materials (documents, illustrations, etc.) without using
an OHP film.
Camera control...

55
Document
imaging camera
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
1) Raise up the arm.
Before preparations
(stowed away)2) Stretch the arm. 3) Turn the arm.
4) Open the camera head. 5) Turn the camera head. 6) Pull up the light. 7) Turn the light.
STORE
CAMERAARM LIGHT
LOCKW.BALANCEGAIN
FOCUS
STORE
CAMERAARM LIGHT...

56
Document
imaging camera
2 11
123
123
123
123
ARM LIGHT
OVERLAY
CAMERAARM LIGHT
LOCKW.BALANCE
CAMERAGAIN
1
FOCUS
FOCUS
STORE
CAMERAARM LIGHTLOCKW.BALANCEGAIN
FOCU
S
123
123
STORE
CAMERAARM LIGHTLOCKW.BALANCEGAIN
FOCUS
28
You can also place the materials at the
back of the projector and move the arm
and the camera head for them.Setting direction Images on the screen
Camera control panel
Press ARM LIGHT.The light turns on.Set a document to be projected.Place the document (illustrations, etc.) onto or...

57
Document
imaging camera
KEYSTONE
AUTOSET
EXIT
ON / STANDBYVOL / ADJ
ENTER
MENU
INPUT
FAN
TEMP
LAMP
ON
43
3
CAMERAINPUTINPUT
5
FOCUS
3 3
OVERLAY
CAMERAARM LIGHT
LOCKW.BALANCE
CAMERAGAINMENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUSTLASER
STORE
CAMERAARM LIGHTLOCKW.BALANCEGAIN
F
OCUS
123
Press CAMERA to select the camera input
mode.• You can also select it by pressing INPUT on the remote
control or on the main unit.  Set the input source on the...

58
Document
imaging camera
OVERLAY
CAMERAARM LIGHT
LOCKW.BALANCE
CAMERAGAIN
67
CAMERAGAIN
6
Press CAMERA GAIN (+/-) to improve view
of a camera subject which is too dark or vivid.
When finished, turn off the light and close it,
and put back the arm.Follow the steps of Preparation of the document imaging
camera in reverse.
• You can adjust the Sharpness of the camera image on the menu screen.
• If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light
or set the...

59
Document
imaging camera
KEYSTONE
AUTOSET
EXIT
ON / STANDBYVOL / ADJ
ENTER
MENU
INPUT
FAN
TEMP
LAMP
ON
12
OVERLAY
312
INPUTINPUT
4
RGB picture
23
OVERLAY
CAMERA ARM LIGHT
LOCKW.BALANCE
CAMERAGAIN
2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUSTLASER
STORE
CAMERAARM LIGHTLOCKW. BA L A NCEGAIN
FOCUS
Overlaying projection
• Handwriting in colors except blue and red cannot be displayed properly.
• Handwriting in fine lines may not be displayed...

60
Document
imaging camera
STORE
CAMERAARM LIGHTLOCKW.BALANCEGAIN
FOC
US
OVERLAY
CAMERAARM LIGHT
LOCKW.BALANCE
CAMERAGAIN
2
12
LOCK
W.BALANCE
This projectors camera is always being adjusted automatically for projected color
balance;
however, the balance can shift away from optimal due to the color scheme of the
document.  Should this occur, the white balance can be set to a fixed condition by
using the following procedure.
Project a white paper and enlarge it to fill the
screen.
Press W.BALANCE to turn...