Toshiba Projector Tlp 780U User Manual

21
Installation and
connection
Ceiling-mounted projector placement
Perform the Projection mode setting on the menu screen for the projection method.
• The relation between the projection size and the distance to the screen is the same as that of the floor-mounted projection mode.
CAUTIONWhen a ceiling mount is required, please consult with the
dealer.
Ceiling-mounted front projection
Viewing a picture projected on the front of the screen from a ceiling
installation.
Ceiling-mounted rear projectionViewing...

22
Installation and
connection
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
Continued
Connecting a computer 
(COMPUTER IN 1 connector)
• The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
• You may not be able to connect some computers to the projector. For details, consult the dealer.
• When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan...

23
Installation and
connection
Continued
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
You can project the picture of analog RGB or digital RGB signal from a computer by using COMPUTER IN 2 connector.
Check that the power for the projector and computer is off before connecting the cables.
COMPUTER IN 2 Connector (DVI connector)
For use as both Analog RGB (2) input and Digital RGB input. At shipping
from factory, it is set for use as Analog RGB...

24
Installation and
connection
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
Continued
You can project the picture from video equipment by using VIDEO IN connectors.
Check that the power for the projector and video equipment is off before connecting the cables.
To S-VIDEO connector
Be sure to connect in the
proper direction.
To S-video output
S-video cable
(Not supplied)
(Red) To AUDIO-R jack
(White) To AUDIO-L jack
(Yellow) To VIDEO jackAV...

25
Installation and
connection
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
Continued
You can project the picture from video equipment with component video output jack.
Check that the power for the projector and video equipment is off before connecting the cables.
COMPUTER IN 1 Connector
For use as both Analog RGB (1) and Y/P
B/PR input. At shipping from
factory, it is set for use as Analog RGB (1) input.
Change the setting on the menu screen...

26
Installation and
connection
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
73
Note
Remove the cover when using the CONTROL connector.
Projector operation control by a computer
You can control the projector by a computer connected with the control cable supplied.
Check that the power for the projector and computer is off before connecting the cables.
To CONTROL connector
Be sure to connect in the
proper direction.
Control cable...

27
Installation and
connection
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN(
Y/PB/PR )
MONITOR
OUTCONTROL
Continued
Computer monitor, etc.
• The analog RGB signals or Y/P
B/PR signals of the COMPUTER IN 1 or COMPUTER IN 2 connector selected by the input select operation are output
from the MONITOR OUT connector.  If neither of these input sources is selected, the signal of the COMPUTER IN 1 connector is output. (Digital RGB
signals are not output.)
• Signals are output...

28
Operations
KEYSTONE
AUTOSET
EXIT
ON / STANDBYVOL / ADJ
ENTER
MENU
INPUT
FAN
TEMP
LAMP
ON
1
1
1
12
ON/STANDBY ON/STANDBY
1
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUSTLASER
ON / STANDBY
FAN
TEMP
LAMP
ON
ON / STANDBY
FAN
TEMP
LAMP
ON
Continued
• The startup screen disappears when you push the EXIT button or waited for a while. You
can also set the startup screen not to be displayed on the menu screen.
• When a projector is used for the first...

29
Operations
2
ENTER
ENTER
3
ENTER
ENTER
4
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUSTLASER2 2,3
2
2,3KEYSTONE
AUTOSET
EXIT
ON / STANDBYVOL / ADJ
ENTER
MENU
INPUT
FAN
TEMP
LAMP
ON
Continued
Projection on the screen (continued)
When a projector is used for the first time, the language selection menu, which is to
select a language for displaying menus or messages, is displayed.  Select a desired
language.  (At shipping from factory, it is set to...

30
Operations
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUSTLASER
5-a
INPUT
INPUT
5-b
INPUT
INPUT
5-a,5-b
5-b
5-a,5-b 5-b
KEYSTONE
AUTOSET
EXIT
ON / STANDBYVOL / ADJ
ENTER
MENU
INPUT
FAN
TEMP
LAMP
ON
ENTER
ENTER
Continued
Select the input source to project.
There are two kinds of methods as follows (5-a and 5-b.)
Select the input source by pressing INPUT
repeatedly.At shipping from factory, Analog RGB(1) connected to
COMPUTER IN 1 connector or...