Toshiba Projector Tlp 561 User Manual
Have a look at the manual Toshiba Projector Tlp 561 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Operations CONTENTSOperating the presentation mode Notes • This function is available with O.S (operating system) of Windows 98/98SE, Windows Me, Windows 2000, Windows XP or Mac OS9 with a USB port as standard. • When connecting to the computer’s USB port for the first time, a message asking you to insert the Windows98 or Windows 98SE CD-ROM may appear on the computer’s monitor screen, depending on whether or not the device driver is installed. If so, do as the message says. • When using a USB cable other than the supplied one, be sure to use a shielded type. You can change the slide, for the presentation on the computer, by using the remote control when connecting the projector to the computer with the supplied USB cable. USBAUDIO INCONTROLVIDEO IN To USB connector Be sure to connect in the proper direction.USB cable (supplied)Computer for presentation To USB port USB connector 1 Connect a computer to the projector with the supplied USB cable. Also connect the RGB cable and the audio cable if necessary. 23 2 Start a presentation on the computer. •In case of Microsoft ® PowerPoint ®, start the slide show to make a state of displaying the first slide. •In case of Adobe® Acrobat ® or AcrobatReader®, make state that [Full Screen] is selected from [View] menu. •This function is also available in other application software that can change a slide by pressing , of a computer. Continued
42 Operations CONTENTSOperating the presentation mode (continued) Adjust the projector before presentation if necessary. In the presentation mode after step 5, the projector cannot be adjusted. 4 MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY 3 6 5,7 3 P.MODE KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON Remote control Control panel (Main unit side) 3 5 Press P.MODE and hold for two seconds. The projector enters into the presentation mode. The icon appears in the presentation mode. Select the computer input with INPUT. You can change the order of procedure 1 to 3. INPUT INPUT P.MODE Change a slide with the selection buttons ( / ). : Advancing to the next slide. : Returning to the previous slide. •The selection buttons of the main unit can not be used. •The slide can not be switched even if you press and hold the selection buttons continuously. (The function is different from the , keys of the computer.) 6 7 When the presentation is finished; To exit the presentation mode, press P.MODE. The projector returns to the normal mode. P.MODE
43CONTENTS Adjustments & Settings Operating the menu screen Continued FULLItemNextQuit Adjust the image brightness. Select the image with its brightness priority or quality (color)priority.Correct the keystone distortion of the screen.Select the input source when changing the input. Adjust the image flicker. EXITENTERMENU GUIDE MENUAnalog RGB Items Button operation guideThe current input source MENU ENTER CT-90106EXIT / P.MODE VOL / ADJ End Press MENU.Then GUIDE MENU appears. (Then FULL MENU appears if the latest operation had been finished with the FULL MENU and afterwards power is not turned off.) When you make more detailed adjustments and settings, call the FULL MENU. Return to the GUIDE MENU when the MENU button is pressed. Press MENU button once again. The FULL MENU of [Picture] appears. FULL MENU has seven pages of [Picture], [Position], [Color], [Audio], [Display], [Default setting] and [Reset]. Use the selection button ( ) to change the page of FULL MENU. / [Picture][Position][Color] [Default setting][Reset][Display][Audio] Select the item with the selection button ( ). / Press ENTER to confirm. The item selected can be adjusted or set. Press EXIT and return. When you select other items, press EXIT repeatedly until GUIDE MENU appears. When you want to quit, press EXIT repeatedly until GUIDE MENU disappears. StartFULL MENU: For the operating instruction, refer to the next page. GUIDE MENU: You can adjust or set the functions used frequently. Adjust and set it with the button indicated on the button operation guide. According to the selected item, the kind ([adjustment],[setting] or [execution]) and the button to be used are indicated on the button operation guide. Control panel (Main unit side)Remote control KEYSTONE AUTOSETEXIT ON / STANDBY VOL / ADJ ENTERMENU INPUT FANTEMPLAMPON Selection VOL/ADJSelection MENUENTEREXIT VOL/ADJ MENU ENTER EXIT MENU MENUMENU MENU ENTER ENTER EXIT EXIT 44 Various adjustments and settings can be made on the menu screen. The basic operations on the menu screen are shown here. Note The item displayed on the menu with gray is not available.
44CONTENTS Adjustments & Settings Operating the menu screen (continued) Analog RGB GUIDEItemExecuteQuit Picture Contrast-12- -12- Bright FullFull Thru Brightness Picture mode Screen size Reset EXITENTERMENUPageAdjust Kind (page) of FULL MENU Items Button operation guide The current input source Adjustment display bar Choices End Select the item with selection buttons ( ). State of a figure below is a sample for explanation. This state does not in fact./ Press ENTER. The Item selected is executed. FULL MENU is displayed after execution. Press ENTER. An object can be selected from the sub menu list. Start Select it with the button indicated on the button operation guide. For the selection method of FULL MENU, refer to the previous page. Press ENTER.Only the (small list of the) selected adjusting items is displayed. This is useful as you can see a main picture not hidden under FULL MENU. Adjust with VOL/ADJ (+/-) or selection buttons ( ). / Press EXIT. FULL MENU is displayed and you can select other items. Press EXIT. FULL MENU disappears, and adjustment or setting is finished. Method -1 Method -2Adjust with VOL/ADJ (+/-) Press the selection button ( ) when selecting other items continuously./ MENU ENTER CT-90106EXIT / P.MODE VOL / ADJ Control panel (Main unit side)Remote control KEYSTONE AUTOSETEXIT ON / STANDBY VOL / ADJ ENTERMENU INPUT FANTEMPLAMPON Selection VOL/ADJSelection MENUENTEREXITVOL/ADJ MENU ENTER EXIT ENTER ENTER ENTER ENTER ENTER ENTER EXIT EXIT EXIT EXIT At the items whose [Execute] is displayed on the operation guide; At the items whose the adjustment bar is displayed; At the items whose the choices are displayed; 43 Notes • The item displayed on the menu with gray is not available. • An exclusive menu is displayed when making PIP function sub-picture settings. 53
45CONTENTS Adjustments & Settings GUIDE MENU adjustments and settings Adjust the contrast of the picture. Adjust the brightness of the picture. Adjust the flicker of the picture. (Sampling clock phase adjustment) The picture is set with its brightness priority. The picture is set with its color quality priority. Adjust the keystone distortion. Adjust the color depth of the picture. Adjust the document imaging cameras gain. Select a shutter speed below to decrease the flickering of the document imaging cameras picture. The shutter speed is set automatically. The shutter speed is fixed to 50 Hz. The shutter speed is fixed to 60 Hz. : COMPUTER IN connector is selectable with the INPUT button. : Video input is selectable with the INPUT button. : Use COMPUTER IN connector as Analog RGB input. : Use COMPUTER IN connector as Y/PB/PR input. : S-Video input is selectable with the INPUT button. : Camera input is selectable with the INPUT button. Ye s (common for all of the inputs) Ye s (common for all of the inputs) - - - Ye s Ye s- - - - Ye s Ye s- - - - Ye s Ye s- Ye s Ye s - Ye s - - Ye s- - Ye s - Ye s Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB Adjust the image brightness.Contrast Brightness ADJ. ADJ. Adjust the image flicker.PhaseADJ. Select the image with its brightness priority or quality (color) priority.BrightSET True colorSET Correct the keystone distortion of the screen.KeystoneADJ. VIDEOSET Select the input source when changing the input.SETCOMPUTER SETAnalog RGB SETY/PB/PR S-VIDEOSET CAMERASET Adjust the image color.ColorADJ. Camera gainADJ. Shutter SETAuto SET50Hz SET60Hz : On/Off with ENTER : On/Off with ( ) or ( ) Adjust the gain of the document imaging camera. Reduce the flicker. On GUIDE MENU, you can set or adjust the functions frequently used. To operate GUIDE MENU, refer to page 43. Notes •The items related to the camera (the document imaging camera) are displayed only with models having a camera. •“Sampling phase” is adjusted and memorized for each RGB signal 70. •“Keystone” and “Input source setting” can be adjusted (set) at all input sources, but the adjustments (settings) made at one input source are applied to all input sources. •It is impossible to exit from the menu if no input source is selected. •If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
46CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Picture Adjust the contrast of the picture. Adjust the brightness of the picture. Adjust the sharpness of the picture. (In Y/PB/PR input mode, sharpness is a setting item.) The picture is set with its brightness priority. The picture is set with its color quality priority. Adjust the document imaging cameras gain. The video mode (color system) is set automatically. The video mode is fixed to NTSC system. The video mode is fixed to PAL system. The video mode is fixed to SECAM system. The video mode is fixed to PAL-N system. The video mode is fixed to PAL-M system. The video mode is fixed to PAL60 system. The video mode is fixed to NTSC4.43 system. The Y/P B/PR signal format is set automatically. The Y/P B/PR signal format is fixed to 480i (525i) mode. The Y/P B/PR signal format is fixed to 480p (525p) mode. The Y/P B/PR signal format is fixed to 575i (625i) mode. The Y/P B/PR signal format is fixed to 720p (750p) mode. The Y/P B/PR signal format is fixed to 1080i (1125i) mode. The shutter speed is set automatically. The shutter speed is fixed at 50 Hz. The shutter speed is fixed at 60 Hz. The picture is displayed with the input source resolution. The picture is converted to wide screen format. Return the adjustments and settings of FULL MENU [Picture] to the factory default values. - - Ye s Ye s Ye s Ye s Ye s- Ye s -- - Ye s Ye s - Ye s Ye s- Ye s Ye s- - Ye s Ye s - Ye s Ye s- Ye s Ye s- - Ye s Ye s Ye s - Ye s Ye s- Ye s - - Ye s Ye s - Ye sYe s Ye s Ye sTLP261: Yes TLP561: - Ye s- - - Ye s Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB Contrast BrightnessADJ. ADJ. SharpnessADJ. Picture modeBrightSET True colorSET Camera gainADJ. Reset EXEC. Video modeAuto.SET NTSCSET PA LSET SECAMSET PAL-NSET PAL-MSET PAL60SET NTSC4.43SET Signal formatAuto.SET 480i (525i)SET 480p (525p)SET 575i (625i)SET 720p (750p)SET 1080i (1125i)SET ShutterAuto.SET 50HzSET 60HzSET Screen sizeFullTLP560/561: The picture is converted to XGA (1024 x 768 dot) resolution. TLP260/261: The picture is converted to SVGA (800 x 600 dot) resolution.SET ThruSET WideSET You can make various adjustments or settings of the picture from FULL MENU [Picture]. To operate FULL MENU, refer to page 44. Notes •The items related to the camera (the document imaging camera) are displayed only with models having a camera. •A part of function is restricted if you set the “Video mode” or “Signal format” to the modes other than [Auto.] . 51 •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
47CONTENTS Adjustments & Settings FULL MENU adjustments - Position Adjust the horizontal display position of the picture. Adjust the vertical display position of the picture. Adjust the flicker of the picture. (Sampling clock phase adjustment) Adjust the sampling frequency of the input signal if vertical stripes appear in the detailed image. Return the adjustments of FULL MENU [Position] to the factory default values. - - - - -- - - - -- - - - -- - - - - Ye s Ye s Ye s Ye s Ye s Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB H-position V-positionADJ. ADJ. PhaseADJ. FrequencyADJ. ResetEXEC. You can adjust the picture position etc. of the analog RGB input from FULL MENU [Position]. To operate FULL MENU, refer to page 44. Notes •This menu is not displayed except with analog RGB input. •The adjustment of each item in this menu is memorized for each RGB signal input 70. •The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments are not memorized.
48CONTENTS Adjustments & Settings FULL MENU adjustments - Color Adjust the color depth of the picture. Adjust the tint of the picture. (Not adjustable at PAL, SECAM, PAL-N,PAL-M and PAL60) Adjust the red level of the picture. Adjust the green level of the picture. Adjust the blue level of the picture. Return the adjustments of FULL MENU [Color] to the factory default value.Ye s Ye s Ye s Ye s- - Ye s Ye s Ye s Ye s- Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye sYe s Ye s Ye s Ye s Ye s Ye s- - Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB Color TintADJ. ADJ. R-levelADJ. G-levelADJ. B-levelADJ. ResetEXEC. You can adjust the color condition of the picture from FULL MENU [Color]. To operate FULL MENU, refer to page 44. Note The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments are not memorized.
49CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Audio Adjust the sound volume emitted from the speaker. The sound is emitted from the speaker. No sound is emitted from the speaker. Return the adjustments and settings of FULL MENU [Audio] to the factory default values. The loudness effect is added to the speaker sound. The loudness effect is not added to the speaker sound. The sound of the left and right channels is mixed and emitted from the speaker. Only the sound of the left input channel is emitted from the speaker. Only the sound of the right channel is emitted from the speaker. Ye s (common) Ye s (common) Ye s (common) Ye s (common) Ye s Ye s Ye s Ye s - - - - - Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB VolumeADJ. Speaker outputOnSET OffSET ResetEXEC. LoudnessOnSET OffSET Channel selectL+RSET LSET RSET You can set the sound emitted from the speaker from FULL MENU [Audio]. To operate FULL MENU, refer to page 44. Notes •When the camera input is selected, sound is not emitted. •Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown in the table. The sound volume can be adjusted for each input source except the camera input. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
50CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Display Adjust the keystone distortion caused by changing the installation angle. Menus and messages are displayed in English. Menus and messages are displayed in French. Menus and messages are displayed in Portuguese. Menus and messages are displayed in Japanese. Menus and messages are displayed in German. Menus and messages are displayed in Italian. Menus and messages are displayed in Spanish. Menus and messages are displayed in Chinese (Simplified). Menus and messages are displayed in Chinese (Traditional). Menus and messages are displayed in Korean. The icon is displayed. The icon is not displayed. The menu background becomes translucent. The menu background is normal. The menu is displayed at the upper left of the screen. The menu is displayed at the upper right of the screen. The menu is displayed at the lower left of the screen. The menu is displayed at the lower right of the screen. Return the adjustments and settings of FULL MENU [Display] to the factory default values. Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Ye s (common for all of the inputs) Y/PB/PRVideo The relationship between input source and item Yes: Adjustable -: Not displayed S-Video CameraAnalog RGB KeystoneADJ. LanguageEnglishSET FrançaisSET IconOn Off ResetEXEC. PortuguêsSET SET DeutschSET ItalianoSET EspañolSET SET SET SET SET SET Menu translucentOn Off SET SET Menu positionUpper left Upper right SET SET Lower leftSET Lower rightSET You can set the language, menu display, etc. from FULL MENU [Display]. To operate FULL MENU, refer to page 44. Notes •Each item can be set at all input sources, but the settings made at one input source are applied to all input sources. •The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized. •The setting of “Menu translucent” is not available if no signal is input. Also, the background of the menu will not be translucent, regardless of the settings.