Toshiba Projector Tlp 561 User Manual
Have a look at the manual Toshiba Projector Tlp 561 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Operations CONTENTSProjection on the screen (continued) 7 6 Notes (Signal sent from the computer) •If you project an image from a computer with an LCD screen while monitoring the image on the computer, the image may not be projected properly, depending on the computer model. In this case, turn off the computer display. For details on controlling the computer display, etc., refer to the computer’s manual and description on the software for the computer used. •The TLP560/TLP561 projects an image by XGA signal (1024 x 768) in full screen. The image quality from a computer signal other than XGA may be inferior. It is recommended to set the external monitor connected to the computer to XGA mode (1024 x 768). •The TLP260/TLP261 projects an image by SVGA signal (800 x 600) in full screen. The image quality of a computer signal except SVGA may deteriorate. It is recommended to set the external monitor connected to the computer to SVGA mode (800 x 600). •The projector can be also applied to DDC2B (Display Data Channel 2B). If your computer is applied to the DDC, start up your computer after turning on the projector. If the order is reversed, the computer may not output any signal. Adjust the picture size by turning the zooming lever. Turn to the right to enlarge the picture. Turn to the left to reduce the picture. Focus on the picture by turning the focusing ring. A still picture is recommended for focusing. 6 7 Continued
32 Operations CONTENTS Notes •To change the projecting angle, adjust the foot adjuster. 21 •If the screen image suffers keystone distortion, press the KEYSTONE button to adjust the distortion. 35 •Due to lamp characteristics, flickers may occasionally occur in a picture. This is not malfunction of the unit. •The lamp may rarely burst with a loud sound. •The projector’s liquid crystal panel is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions. •When trying to press a button whose operation is not available, the icon appears. •When supplying the signal not compatible with the projector, the icon appears. •When signals are not input from the input source, the icon appears. •The projector may stop operating if the surrounding temperature is too high or if the air filter is clogged with dust. 61 Press VOL/ADJ (+/-) to adjust volume. Press the (+) button to increase volume. Press the ( -) button to decrease volume. 8 VOL/ADJ VOL/ADJ Projection on the screen (continued) MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 8 8 Remote control Control panel (Main unit side) About the LCD Panel The life of the LCD panel is limited. Take care over the points below so as to use the panel for years. •To prolong the life of this panel, never fail to turn the power off when the panel is not in use and make sure that the lamp has gone out. The state of the lamp being extinguished helps enhance the effect of energy saving. •If the air filter is stained and is clogged up, the main unit inner temperature rises. As a result, the life of the LCD is shortened and a malfunction may also occur. Clean the air filter from time to time 62 and replace it regularly. It is recommended that this replacement be done at the time of replacing a lamp. (Ask a dealer where the unit was purchased or your nearby service station about an air filter for replacement.)
33 Operations CONTENTSTurning the power off Press ON/STANDBY after using the projector. An instruction message for turning the power off appears on the screen and disappears after a while. When the message disappears, operation becomes invalid. Press ON/STANDBY again. Cooling starts. Once cooling is completed, the LAMP and FAN indicators turn off and the standby mode is set. (The ON indicator turns in orange.) To protect the light source lamp, the LAMP indicator blinks as long as a minimum of cooling is necessary. The power cannot be turned back on during this time. Unplugging the power cord at this time will shorten the lamp’s duration life. The cooling fan continues to run for a while to expel the heat remaining inside. If you are in a hurry, however, you may unplug the power cord at this time. The standby mode is set. 1 2 MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY 2 1,21,2 KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON (Green) (Green) (Green) (Off) (Off) (Off) Flashing(Orange) (Orange) ABC ONLAMP FA N ONLAMP FA N ONLAMP FA N(Orange) ON/STANDBY ON/STANDBY ON/STANDBY ON/STANDBY B C A Notes •The projector consumes about 15W of power in the standby mode. We recommend you unplug the power cord when not using the projector for long periods of time. •Be sure that the LAMP indicator has turned off before unplugging the power cord. Cutting the power by unplugging the power cord while the projector is operating or the light source lamp is being cooled will shorten the lamp’s duration life. Should a fault or some other irregularity arise with this unit, unplug the power cord. •When reinserting the power plug before the lamp has cooled, please wait until the lamp has cooled sufficiently before use. When the lamp is at a high temperature, it may not light and it’s life duration will be shortened. Remote control Control panel (Main unit side) Indicators
34 Operations CONTENTS Notes •Automatic adjustment may not be performed properly for signals other than those computers’ signals with which the projector is compatible. •The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 47. * Sampling frequency Analog RGB signals input from the computer are converted into digital signals inside the projector. The sampling frequency is the number of times per second the analog signals are converted into digital signals. In order to capture (sample) each individual dot of the computer’s signals, the sampling frequency must be adjusted to match the computer’s dot clock frequency. If this adjustment is off, details of the image details may be blurred, a striped pattern may appear if images with many vertical lines are displayed, or the image’s width may change. For computer signals with which are projector-compatible, the sampling frequency is adjusted automatically even when the AUTO SET button is not pressed. * Sampling phase The sampling phase is the timing at which the computer’s analog RGB signals are sampled. If the sampling phase is off, the individual dots cannot be sampled at the proper timing, resulting in blurred or flickering images. Adjusting the picture automatically 1 2 MENU ON /INPUT ENTER CT-90106 KEYSTONEAUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 2 2 You can adjust the optimum horizontal position, vertical position, sampling phase and sampling frequency for projecting analog RGB signals at the touch of a button. AUTO SET AUTO SET Input full screen video signals from the input source (computer) and project the image. Adjustments may not be performed properly for images that are not displayed on the entire screen or for extremely dark images. Press AUTO SET. The horizontal position, vertical position, sampling phase and sampling frequency are adjusted automatically. The icon appears during signal processing. Remote control Control panel (Main unit side)
35 Operations CONTENTSCorrecting the keystone distortion A picture may be expanded on the upper side if projected upward from the projector lifted up by the foot adjuster. The projector can correct this keystone distortion. MENU ON /INPUT ENTER CT-90106 KEYSTONEAUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 1 2 1 3 2 3 Remote control Control panel (Main unit side) 1 Press KEYSTONE. The keystone adjustment menu appears. (This menu is the same as the sub-menu which is displayed when “Correct the keystone distortion of the screen” is selected from GUIDE MENU. 45 ) Adjust the distortion with the selection buttons ( / ). : The upper part of the screen shrinks. : The upper part of the screen expands. KEYSTONE KEYSTONE 2 3 To finish the adjustment, press EXIT repeatedly until the menu disappears. EXIT EXIT Before correction After correction Notes •Turn the lens shift dial clockwise fully before using the foot adjuster. 20 •Due to digital correction processing, some of the information may dropped or the picture quality may be degraded depending on the keystone correction setting or the contents of the signal source.
36 Operations CONTENTSCutting off the picture and sound temporarily The image and sound of this projector can be turned off if you wish to temporarily project the image from another projector or an OHP, etc., onto the screen. Note The mute mode is cancelled if another operation is performed during the mute mode. MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZEMUTECALLRESIZE VOL / ADJ STANDBY MUTE MUTEPress MUTE. The sound and picture are cut off temporarily. To cancel the mute mode, press MUTE again. The image and sound will be output. The icon appears in the mute mode. Remote control
37 Operations CONTENTSFreezing the picture You can freeze the image being projected. Use this function to stop moving images from a video recorder during presentations. Notes •The frozen image can be enlarged with the RESIZE buttons. The freeze mode is cancelled if any operation other than RESIZE is performed. •The freeze mode cannot be set when there is no input (when no signals are being supplied from a signal source). •The input source’s moving image continues to run even when the projector is set in freeze mode. MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZEMUTE CALLRESIZE VOL / ADJ STANDBY FREEZE FREEZEPress FREEZE. The picture freezes. To release the picture, press FREEZE again. The icon appears in the freeze mode. Remote control
38 Operations CONTENTS You can enlarge (resize) the picture size projected. Enlarging the picture size Press RESIZE (). The enlargement ratio increases each time the RESIZE () button is pressed. The enlargement ratio can be increased continuously by keeping the button pressed in. To reduce the enlargement ratio, press the RESIZE () button. The enlargement ratio can be reduced continuously by keeping the button pressed in. The enlarged section is moved when the selection buttons ( / / / ) are pressed. The section can be moved continuously by keeping the button pressed in. Press the EXIT button to cancel the resize mode and return to the original size. MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY EXIT RESIZE /// RESIZE RESIZE EXIT Notes •Enlarged images can be frozen by pressing the FREEZE button. The frozen image can also be enlarged or reduced. •The resize mode is cancelled if any operation other than setting the freeze mode is performed. •This projector uses electrical digital resizing, so the picture quality degrades when images are enlarged. •In rare cases, the picture may be disturbed while the magnification section is being moved. •This function does not work in no input status (no signal is supplied from the signal source). Remote control The icon appears in the resize mode.
39 Operations CONTENTS Press PIP. A sub-picture is displayed. Press the PIP button again to turn off the sub-picture. Video or S-video images can be displayed as small images within the computer’s image. (Referred to as “sub-pictures” in this manual.) Notes •The PIP function cannot be used when a source other than an RGB input source is selected. •The PIP function cannot be used without signals supplied from an RGB signal source. •The sub-picture turns off if any other operation is performed. •The signal source, size and display position to display sub-pictures can be changed from the menu screen. 53 PIP Displaying PIP Sub-pictures MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY PIP Remote control
40 Operations CONTENTS CALL Notes •The information displayed is not refreshed even if it changes. To refresh the information, turn off the information display, then turn it back on. •The information display turns off if any other operation is performed. •The “Lamp time” shows an approximate time for lamp replacement. (It should not be used as a lamp warranty time counter.) If the time indicated here nears 1500H, contact your store of purchase about obtaining a replacement lamp (TLPL55, sold separately). •The “Lamp time” can be reset when the lamp is replaced. •The “Version” is the version of the control program used in the projector and is used for servicing, etc. MENU ON /INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALLRESIZE VOL / ADJ STANDBY CALL Displaying Information Information on the input signal source, etc., can be displayed. Remote control Press CALL. The information described below is displayed. The information display turns off when the CALL button is pressed again. Status display Input - current input source H-resolution - the horizontal resolution of the input signal (at RGB input) V-resolution - the vertical resolution of the input signal (at RGB input) H-frequency - the horizontal frequency of the input signal (at RGB input) V-frequency - the vertical frequency of the input signal (at RGB input) Sync - the polarity of the sync signal (at RGB input) Video mode - the color mode of the video signal (at Video, S-Video input) Signal format - the formatting of the Y/P B/PR signal (at Y/PB/PR input) Lamp time - the elapsed usage time of the lamp Version - the version of the firmware Shutter - the shutter speed of the document imaging camera (at document imaging camera input)