Toshiba Projector Tdp Mt200 User Manual

21
Preparations
EnglishFrançaisEspañolDeutschItalianoPortuguêsSvenska
(Orange)
■Connecting the power cord
1Insert the power cord connector into the
AC IN socket of the projector.
2Insert the power cord plug into a wall or
other power outlet.
■Turning the power on
1Turn on the main power switch
The ON indicator will change to
orange, indicating standby mode.
•After the main power switch is turned
on, the inner cooling fan starts
cooling.
2Press the ON/STANDBY
button.
The power turns on, and the following...

22
Notes
•The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu 
p.30.
•The first time you use the projector after purchase, after the start-up screen disappears,
the Language menu is displayed 
p.23.
■ Turning the power off
1Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. This
message...

23
Operations
EnglishFrançaisEspañolDeutschItalianoPortuguêsSvenska
1Turn on the power.
Turn on the power by following the instructions in “Turning the power on” p.21.
2 Select the language and the lamp power (When using the
first time).
When the projector is used for the first time after purchase, menu for language and
lamp power selection and configuration is displayed in English. (If the screen is out of
focus, adjust it according to the step 
6.)
qUse the  or  button to select the
desired language...

24
5Projector placement angle adjustments
The placement angle and the height of the projected image can be adjusted by the foot
adjuster.
qLift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
wTo adjust the horizontal angle, use
the tilt adjuster.
To stow the foot adjuster, hold up the projector
while pressing the foot adjuster release button,
then slowly lower the projector.
6Adjusting...

25
Operations
EnglishFrançaisEspañolDeutschItalianoPortuguêsSvenska
■Using auto setting
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.
1Press the SET UP button.
The Set up menu appears.
2Press the SET UP button again.
The displayed menu item is automatically adjusted/set.
For computer input, the 
 icon will appear during
processing.
For manual adjustment and setting, see the following table 
p.26.
Notes
•The image may not be...

26
Using handy features (Continued)
●Manual adjustments and settings
The menu items of the Set up menu vary depending on the input type, as shown in
the table below.
Use the 
     buttons to adjust the items in the table below, then press
the RETURN button when you are finished.
Select Item DescriptionComputer  DVIY/PB/PRVideo
S-video
KeystoneCorrect the keystone (trapezoid) distortion of the 
screen.
Screen shrinking             Screen shrinking
downward                        upward
Auto...

27
Operations
EnglishFrançaisEspañolDeutschItalianoPortuguêsSvenska
■Cutting off the picture temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images can be turned off.
Press the remote control’s MUTE button.
The picture is cut off. (The Mute function is released when pressing
the MUTE button again.)
Notes
•The  icon will appear while mute is in effect.
•Operating any other functions will also cancel the muting.
■Freezing...

28
You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons p.16 on the control panel (main unit side) and remote control.
■How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
Using the menus
Note
•Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the power cable is disconnected before this, or the power goes out,
then the data will...

29
Operations
EnglishFrançaisEspañolDeutschItalianoPortuguêsSvenska
■The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with  “Yes”, and those that cannot are marked with “No”.
Item      DescriptionComputerY/PB/PRVideo
DV I
S-video
 ContrastAdjust the image contrast. Yes Yes Yes Yes
Lower
Higher
BrightnessAdjust the brightness of the image. Yes Yes Yes Yes
Darker
Brighter
ColorAdjust the color of the image. No Yes Yes No
Lighter
Deeper
Tint...

30
Using the menu (Continued)
■The display setting menu
Use this menu to set screen display-related items.
Description
Screen size
Language
Background
Icon
Start-up screen
Item
Full           4:3           Zoom
Full : This mode is best for squeeze-signal video images.
4:3 : This mode is best for 4:3-signal video images on the 4:3-size screen.
Zoom : This mode is best for video images of letter-box or cinema signals.
Select one of the languages below to use for displaying the menu and messages 
[     :...