Toshiba Perception 1 2 User Manual

Direcf-in line 
DESCRlPTlON This feature permits an incoming trunk to be assigned to a specific station 
or hunt group, so that an incoming trunk call will ring directly at the 
specified station or hunt group. A Direct-in Line may be assigned to either 
the same or an alternate station (or hunt group) during day and night 
operation. Direct-in Lines are particularly applicable to Attendant-Position 
Electronic/Digital Telephones, either with or without associated Direct 
Station Selection Consoles, and...

Direct-in Line 
RELATED FEATURES 
BENEFITS 1. Automatic Call Distribution/Management Information System 
(ACD/MIS). 
2. Attendant-Position Electronic/Digital Telephone (DSWDDSS). 
3. Direct-in Line Pooling (System). 
4. Consoleless Operation (System). 
5. Delayed Ringing (System). 
The Direct-in Line feature allows any trunk to ring directly at any station 
without having to go through an attendant. This reduces the cost of 
handling incoming calls by reducing the call load of an attendant, or by...

Direct-in Line Pooling (Delayed Ringing) 
DESCRIPTION 
OPERATION 
PROGRAMMING 
RELATED FEATURES 
BENEFITS When the system is in the Day mode of operation, direct-in line trunks may 
utilize the Direct-in Line Pooling feature. This feature allows up to eight 
DNs to be assigned to ring either immediately, or after a preset period of 
time (delayed ringing) per trunk. Stations set for delayed ringing will 
receive a visual indication of an incoming call before ringing begins. If a 
pooled DN is busy, then...

Direct Inward Dialing 
DESCRIPTION Direct Inward Dialing (DID) allows an incoming call from the network to 
reach a specific station without attendant assistance. Because incoming 
DID calls route into the system over shared trunk facilities, the end-user 
can use this feature to reduce trunking costs. DID service is beneficial in a 
situation where there is a high volume of calls which should go directly to 
specific stations. Since calls would ordinarily be routed through an 
attendant, the use of DID...

Direct In ward Dialing 
PROGRAMMING 
RELATED FEATURES 
TO PROGRAM: Enter either X # Y or X # YY 
X = the digit which is to be translated into another digit or 
digits (when two digits are absorbed, only the second digit 
will be translated). 
Y or YY = the digit or digits which are to take the place of the 
initially-absorbed digit (X). 
TRN2 (Translated Number 2)-Defines the absorbed digit (IAB) 
which is to be translated into another digit or digits. This parameter is 
the same as TRNl (see examples)....

Direct Inward Dialing 
then correlates the transmitted digits with the DID station’s two-, three-, or 
four-digit system directory number. 
BENEFITS 
The use of Direct Inward Dialing allows a caller to reach a specific station 
directly, without attendant interception. This both reduces the number of 
necessary attendants, and frees an attendant for other duties. It also 
allows calls to a specific person or group to be answered with less delay. 
This feature is particularly applicable to executive...

Disfincfive Ringing 
DESCRIPTION 
OPERATION 
PROGRAMMING 
RELATED FEATURES 
BENEFITS PERCEPTION provides Distinctive Ringing patterns, which enable a 
station user to distinguish between incoming station-to-station calls and 
trunk/attendant-to-station calls. An additional tone sequence is supplied to 
indicate an automatic callback to a station, and varies according to the 
absence or presence of the Handsfree Answerback capability. 
Automatic. 
NOTES: 
The following ringing patterns are provided by...

Emergency Ringdown 
DESCRIPTION 
OPERATION 
PROGRAMMING 
RELATED FEATURES 
BENEFITS This feature allows a user to indicate the destination for an emergencv 
signal (station-to-station ring) when a station goes off-hook, but does not 
complete dialing a valid number within a programmed time period (Dial 
Pulse Timeout and Line Lockout Time). The destination can be 
programmed as either a specific station, the attendant, or the system UNA 
device. An LCD electronic/digital telephone, or the attendant, will...

Flexible Numbering 
DESCRlPTlON The Flexible Numbering Plan allows for flexible station directory number 
assignment, as well as for the customization of trunk and special service 
access codes. Such flexibility allows assignments to be made in 
accordance with a customer’s unique requirements and preferences. 
OPERATION None. 
PROGRAMMING Numbering assignments are made during installation programming in 
accordance with the numbering plan desired by a particular customer. 
Specific assignments are made...

Immediate Ringing 
DESCRlPTlON The Immediate Ringing feature supplies ringing (20 Hz, tone, or buzz 
signals) to a station, immediately after the completion of a dialed number. 
This eliminates the time delay associated with a ringing cycle. 
OPERATION Ringing is applied to a called station as the result of any of the following 
performances: 
W Station-to-station call. 
n Station call transfer. 
n Attendant forwarded trunk call. 
n Application of Call Forwarding features. 
n DIDICCSIVTIE Trunk call. 
n...