Toshiba L50db Owners Manual

Swipe rightStretch your hand, and quickly move to the right
without pausing.
Function:  Switchs between apps opening.Swipe upStretch your hand, and quickly move upwards
without pausing.
Function:  Opens app menus or commands if
there are.FingerStretch out your finger shown as the picture in front of the camera.
Function:  Enables the virtual mouse mode and
the mouse pointer will turn into a hand icon to
follow your hand direction.GripEnable the virtual mouse mode, select an item
and clench your hand into...

VolumeRaise your fist, move up to increase the
computer’s volume or move down to decrease
the volume. Stretch your hand to end the
operation.
Function: Adjust the computer’s sound volume.The zoom  gesture is supported by the following applications:
Photos app, Internet Explorer app, Maps app from the Start screen
Microsoft Windows Photo Viewer from the  Desktop
The software should be disabled or exited if you want to use other
applications based on camera.
Configuring TOSHIBA Gesture Controller...

The following items will be described in this section:
Creating Recovery Media
Restoring the pre-installed software from your created Recovery
Media
Restoring the pre-installed software from the Recovery Hard Disk
Drive
Creating Recovery Media This section describes how to create Recovery Media.
Be sure to connect the AC adaptor when you create Recovery Media.
Be sure to close all other software programs except the Recovery
Media Creator.
Do not run software such as screen savers which can put a heavy...

2. Turn on your computer and allow it to load the Windows operatingsystem from the Hard Disk Drive as normal.
3. Insert the first blank disc into the optical disc drive tray, or insert the USB Flash Memory into one available USB port.
4. Click  Desktop Assist -> Support & Recovery -> Recovery Media 
Creator  on the desktop.
5. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the  Create button.
Restoring the pre-installed software from your...

4. Use the up and down cursor key to select the appropriate option fromthe menu according to your actual recovery media.
5. A menu will be displayed from which you should follow the on-screen instructions.If you have previously chosen to remove the recovery partition and are
trying to create "Recovery Media", you will see the following message: "The
Recovery Media Creator can not be launched because there is no recovery
partition."
When there is no recovery partition, the Recovery Media...

1. Click the Settings charm and click  Change PC settings .
2. Click  Update and recovery  under PC settings and then click
Recovery .
3. Click  Get started  under Remove everything and reinstall Windows .
4. Follow the on screen instructions to finish the recovery.
Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the
TOSHIBA Europe Backup Media Online Shop.* Please note that this service is not free-of-charge.
1. Visit https://backupmedia.toshiba.eu on...

Chapter 6
Troubleshooting TOSHIBA has designed this computer for durability, however, shouldproblems occur you are able to use the procedures detailed in this chapter
to help determine the cause.
All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Problem solving process Resolving problems will be much easier if you observe the following
guidelines:
Stop immediately when you recognize a problem exists as taking...

Check all cables to ensure they are correctly and firmly attached to the
computer - loose cables can cause signal errors.
Inspect all connecting cables for loose wires and all connectors for loose pins.
Check that your disc media is correctly loaded
Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems toTOSHIBA Support. In addition, if a problem recurs, the log you have madewill help to identify the problem faster....

HardwareIf you cannot find a software problem, you should
then check the setup and configuration of your
hardware. First run through the items in the
preliminary checklist as described previously
then, if you still cannot correct the problem, try to identify the source - the next section provideschecklists for individual components and
peripherals.Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software canbe used with...

If the indicator is glowing, the computer is on. Also, try turning the computer
off and then on.
If you are using an AC adaptor, verify that the computer is receiving power
from the external power source by looking at the  DC IN/Battery indicator. If
the indicator is glowing, the computer is connected to a live external power
source.
The computer will not load advanced options during startup
By holding down one of the following keys during startup, your computer
will load advanced options as shown...