Toshiba L50db Owners Manual

Passwords set by the TOSHIBA Password Utility function are different from
the Windows password.
User Password
To start the utility, click the following items on the desktop:
Desktop Assist -> Tools & Utilities -> Password Utility -> User 
Password
User authentication may be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, etc.
Set  (button)
Click this button to register a password. After a password is set, you
will be prompted to enter it when you start...

To start BIOS Setup.
1. Click the power icon ( 
 ) on the Start screen and then select
Restart .
2. Hold down the F2 key and then release this key one second after
the computer is power on - the BIOS setup utility will load.
To end the BIOS Setup, press  F10, and then select  Yes to accept the
changes. The computer will restart.
If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

Enter Password [ ]At this point, the function keys do not work. They will function after youenter the password.
2. Enter the Password.
3. Press  ENTER.
If you enter the password incorrectly three times in a row, or if you don’t
enter the password within 1 minute, the computer shuts off. In this case,
some features that can power on the computer automatically (Wake-up on
LAN, Task Scheduler, etc) may not work. You must turn the computer back
on to retry password entry.
TOSHIBA System Settings
TOSHIBA...

LAN—Allows you to set conditions for LANThe settings or options explained here may vary depending on the model
you purchased.
After you changed the settings, a dialog box may appear to prompt you that
the changes will take effect after the computer is restarted. Make sure to restart your computer immediately to apply these changes.
USB Charge
Your computer can supply USB Bus power (DC5V) to the USB port.The port with the icon ( 
 ) supports the following feature:
USB Sleep and Charge
System ON CDP...

External devices connected to the USB bus power (DC5V) function
that interfaces with the power ON/OFF of the computer may always be
in an operational state.
When there is a current overflow of the external devices connected to
the compatible ports, USB bus power (DC5V) supply may be stopped
for safety reasons.
When Sleep and Charge function is enabled, the USB Wakeup
function may not work for compatible ports. In that case, if there is a USB port that does not have the Sleep and Charge function, attach...

Disable features when
the battery level
reachesSpecifies the lower limit of remaining battery life
by moving the slider bar. If the remaining battery
life falls below the setting, the Sleep and Charge function will be stopped.
This setting is only available when the  Function 
under Battery Mode  is enabled.
System ON CDP Charge
This function enable/disable CDP (Charging Downstream Port) to use rapid
USB charge while the computer is powered on. When "System ON CDP Charge Mode" is enabled, your...

This software is only provided with some models.
It is recommended that the AC adaptor be connected while TOSHIBA
Media Player is running. Power saving features may interfere with
smooth playback. When TOSHIBA Media Player is used with a battery
power, set the Power Options to "Balance".
The screen saver is disabled while TOSHIBA Media Player is playing
a video file or slideshows of photos.
The computer will not enter Sleep and Hibernation mode
automatically, while TOSHIBA Media Player is...

User Interface and operational procedures might differ depending on
the application version. Please refer to the  Help of TOSHIBA Media 
Player by sMedio TrueLink+  for details.
Opening TOSHIBA Media Player by sMedio TrueLink+
Manual
The features and operations about TOSHIBA Media Player are explained
in the TOSHIBA Media Player Manual.
Use the following procedure to open TOSHIBA Media Player Online help: When TOSHIBA Media Player is running, click  Help of the Settings charm.
TOSHIBA PC Health Monitor...

The TOSHIBA PC Health Monitor software does not extend or modify
TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply.
Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be opened by clicking  Desktop 
Assist -> Support & Recovery -> PC Health Monitor  on the desktop.
The TOSHIBA PC Health Monitor main screen will be displayed.
This utility may be disabled by default on your computer. You can...

Starting TOSHIBA Gesture ControllerThe TOSHIBA Gesture Controller can be started using the following
methods:
Click the  TOSHIBA Gesture Controller  icon on the Start screen.
Click TOSHIBA Gesture Controller  on the desktop.
Using TOSHIBA Gesture Controller Raise your hand in front of your computer and operate within the distanceand angle described as below.
Distance range30cm to 100cm away from the Web Camera to
your hand.Angle rangeWithin a 60-degree both horizontal and vertical
range of the Web...