Toshiba Dvr610 Manual

							•Ifthereisapower failureorthisunithasbeen
unplugged formore than30seconds, theclock setting
and alltimer programming willbelost.
•
Ifa discisnotinserted orifainserted discisnotrecordable (finalizedDVD-RW/-R,finalizedDVD+RW,a
fully recorded disc,etc.), DVD onthe front panel
display flashesand
timerrecording cannotbe
performed.Insomecases,~will appear momentarily
around thestartpointastheunitattemptstorecord.Pleaseinsert arecordable disc.
•
Ifa cassette tapewithanerase-protection tabisnotin
the cassette compartmentorthereisnocassette tapein
the cassette compartment,VCRonthe front panel
display flashesandtimer recording cannotbe
performed.
Pleaseinsert arecordable cassettetape.
•
Ifyou press [TIMERSET]andturn ontheunitwhile
eitherDVDorVCRisin timer standby mode,~disappears.Inthiscase,youcannot change themode
betweenDVDandVCR.You cannot change anysettings
using [SETUP]oreditdiscs.
• When
allthe timer recordingiscompleted,~flashes.Toplayback oreject therecordeddisc,press
[I/OON/STANDBY] first,then select therecorded titleandpress[PLAY~],or[OPEN/CLOSE~]toremove thedisc.
•During timerrecordingortimerstandby mode(~willappear), anyoperations ontheunitwillnotbeavailable.Tomake these operations available,press[.STOP]on
thefrontpaneltocancel thetimerrecordingor[TIMERSET]toreleasetimerstandby mode(~willdisappear).
• To cancel the timer standbymode,press[TIMER
SET].
•When thestarting andtheending timearethesame,Exceeds12hours appears andtheprogram settingwillnotbeaccepted.
• When theprogrammed startingandending timeare
earlier thanthecurrent time,thesetting will
notbe
accepted.
•
Ifthe starting timeisearlierandtheending timeislater
than thecurrent time,therecording willstart right after
[TIMER
SET]ispressed.
• The
timerrecording cannotbeperformed inDVDandVCRatthe same time.Ifyouset2programmingwiththe
same channel andtime inboth devices, theprogram
withalower program numberwillberecorded.
ThePriorityofOverlapped Settings
Thisunitrecordstheprograms accordingtopriorityifthe timerprogrammings areoverlapped. Thetimerprogramming setpreviouslyhaspriority.
A timer recordingoflower priority willbecanceledorstart from themiddle.
Check theoverlapped
timerprogrammings andchange thepriorityifnecessary.
•
Whenthe starting timeisthesame:•Whenthestartingtimeand theendingtimeAprogramsetpreviously(PROG.A)haspriority.foreach programs aredifferent:
Aprogramthathasearlier starttimehaspriority.
PROG.A
PROG.B
•When therecording timeispartiallyoverlapped:PROG.Awill start afterPROG.Biscomplete toberecorded.
PROG.A
•When therecording timeisentirelyoverlapped:PROG.Awillnotberecorded.
PROG.B
NoteforDVDrecording
oWhentherecordingtimeof2programs areoverlapped,or
theendtimeofaprogram andthestarttimeofanother
programisthe same, thefirst 2minutes (atthelongest)ofthesubsequent programwillbecut off.
oIfthecut-offportioncomesupto3minutesormore, this
program willbedisplayedwitherrorsnumberE40inthetimerprogramming, list. •
When
theendtimeoftheprogrammingcurrentlybeing recorded andthestarttimeofthesubsequent programaresame:ThebeginningofthePROG.Bmaybecut off.
EN41 
						

							,
SATELLITELINK
Youcansettheunittostart recording whenever it
detects thevideo signal fromtheexternal tuner.
Preparing forthe satellite linktimer recording:
Preparation onthe tuner
•The external tunershould beequippedwithsome kindoftimerfunction. Usingtimerfunctionofthetuner, set
ittooutputaudio/video signalswhenitcomestothe
timeyouwanttostart recording, andstopoutputaudio/video signals whenitcomestothetimeyou wantto
finish recording. Refertothetuners manual onhowtosetthe timer.
• Make sure
tosetthe satellite linkstandby modewhen
you finish setting.
Preparation onthis unit
•Youmust lettheunitknow which videoinputjackyou
are using before making arecording.
Refer
to5ETIING5FORTHEVIDEOINPUT onpage20.
/0 0 0
0 0II
,,
SAT.lINK
0TIMERPROG.
GJ
~
H~
r,,;v
.....
STOP...I~·~,I,.,...fi(..TIMERSET
0
TOSHIBASE·R0295
0 0 0 0 0

~
42EN
1
2
3
4
5
Press[SAT.LINK].
Use
LA./T]toselect thetime, media
and recording mode,thenpress
[ENTER].
~
lS1l1rt·'~-I12:00AMDV~XP••.To__~
UseLA./T]or[the Number buttons]
tosetthedesiredstarting time,then
press
[~].
• The hourcanbeselected from1to12withAMorPM.
•Repeat procedures inthis steptosetthe
desired minutes.
• If you wish
togobacktothe left, press [~l.
Use[A./T]toselect arecording
media (DVD orVCR), thenpress
[~].
Use[£/T]toselecttherecording
mode.
RefertoRecording Modeonpage33forDVD
orRecording onpage99forVCR. 
						

							6
Press[ENTER].
ToStandby Modeishighlighted.
7Press[ENTER]again.
Inasecond, theunit willbeturnedoffautomaticallyasitgoes intothesatellite link
standby mode.
Tocancelthesatellitelinkfunctionwhile inthesatellitelinkstandbymode:
Press[TIMER SET]toturn onthe unit.
Tocancelthesatellitelinkfunctionwhilethe
satellitelinkrecordingisinprogress:
Press[.STOP]or[~EJECT,.STOP]on the
front panel
oftheunit.
Note
-Ifthesignalofexternalinputbreaks upover 5seconds, satellitelinkfunction will becanceled:
•
Ifyou havenotsetthe clock, Clock Setting menuwillappear atstep1.f'oliowtosteR~in,ClockSettingon
page26.
•
Youcannot setthe endtimeforthe satellite linktimer recordingonthisunit..••.,
•Recording picturewillbedistortedifthe copy protection signalisbeingdetectedd(Jrin~satellite.~.......,...
recording.,,,;:,
-Youcanrecord thesatellite linkbyusing S-videoinputjacksonthe rear panel. Referto page19.,ninformation. 
-
Press[TIMER PROG.]duringthesatellite linktimer recordingtocheck thesatellite linktimer recording
progress.
• When aregular timerrecording andthesatellite linktimer recording areoverlapped, thoserecordings
arerecordedasillustrated below. ,
timerrecording
satellite link
actualrecording
example 1
I
Thefirst 2minutes (atthelongest) willbecutoff.
timerrecording
satellite link
actualrecording
example 2example 3
timerrecording
IsatellitelinkIII I
IactualI Irecording
.-:~efirst2minutes(:~tthelongestrwill,becutoff.
EN43 
						

							Connectiontoan ExternalD.4[!vice.
Connecttheexternal deviceproperlytotheunitbyusinginputjackseitherL2(Front)orL1(Rear).
When
connectingan external deviceofmonauraloutputtothisunit, useAUDIO LjackofL2(Front).
Use S-video
ortheRCAaudio/videocablesforthisconnection.
WhenconnectingaDVC(digitalvideocamcorder). usetheDVinputjackonthefrontpanel insteadofVIDEOINjack.
frontofthisunit6====d1
__!!2..=-1I,,,,,I"'~~.._ir.l~
'~."''''
v~u~or~UDIOau;-I
p;-
1M:.
ov-our
or
M.
Suredblsedthidf110...
RCAaudiocable(UR)xl,..
:..RCAvideocablei1. .
Please purchase
therestofthenecessary cablesatyourlocalstore.-.,..
44EN 
						

							Startplayback ontheexternaldevice
torecordfrom.
Press[RECMODE]toselecta
recording mode.
RefertoRecording Modeonpage33forDVDorRecording onpage 99forVCR.
Press[.STOP]/ [....EJECT/.STOP]
ontheunittostop recording.
Thisoperation maytake
awhile to
becompleted.
Selecttheinputoftheunitwhichthe
external deviceisconnected.(L1,L2
orDV(l3»
•To use theinputjacks ontherearofthisunit;
Select L1byusing[INPUTSELECT-E».
•To use theinputjacks onthefrontofthisunit;
Select L2orDV(L3)byusing[INPUTSELECT-E>).
When youwanttorecordtoa
cassette tape:
Press [VCR].
Insert
thecassettetapewith an
erase-protection
tabintothecassette
compartment.
Press[eREC]ontheunittostart
recording.
Whenyouwanttorecordtothedisc::
Press [OVD].
Press[OPEN/CLOSE....]to open thedisc
tray.Place thedisctorecord properly.
Press [OPEN/CLOSE
....]againtoclose
thedisc tray.
Ittakes awhiletoload
the disc.
2
5
4
7
3
6
1
~~~@$i~_
Before recordingfromanexternal device,refertothe
instructionsfortheconnectiononpage 44.
.Bfl:fig,glg9Jm!n.IIA~",mJmrtn.;flb'rEr···**t%_!fitf·e"f"Wr!IT·.trrtHfj;Wr,M1tfee
Turn ontheTVand press
[I/OON/STANDBY], andbesureto
selecttheinputoftheTVtowhich
theunitisconnected.
\i--------+-----1j
EN45 
						

							-DVDUBBING
Guidecto,DVandOn-Scree.nJ)ispla
This function helpsyoutoeasilydubthecontentsoftheDVC(digital videocamcorder)tothisunit.
Youcancontrol basicoperationsoftheDVCfromtheremote controlofthisunitsuchasplayback, fastforward or
reverse andstop alloperations
iftheDVCisinvideo mode.UsetheDVcablethathas4-pininputjackandiscompliancewiththeIEEE1394standards. WhenyouconnecttoDVinputjack onthefrontofthis unit, select DV
position byusing [INPUT
SELECT~]onthe remote controlandpress [DISPLAY]toshow theDVdubbinginformation forthe operationofyourDVC.
WhentheDVCisnotincamera mode...
SP(:110
~..Alk1m-~III1.i."'O:l~·
111;11e-
o
Themenu changes accordingtowhatmodeofDVC.Switch themode ontheDVCtoplayback modeforthedubbinginformation,
WhentheDVCis
~~J~/Jfi3i:~vD~dieioim~o~de~.~..~~~
2~'fico~nt;n>li§~~D~VD~gr1Vc
rD,,::.L__......_.6_A_B-_~~_"2_:..--
,_SPl1:00
3 4
C!I3;ii.f.fj
Youcannot control theDVCinVCRmode.FordubbingontoVCR,refertopage48.
The
followinginstructions aredescribedwiththeoperations usingtheremotecontrolofthisunit.
6.
ProductnameofyourDVC
• If the unit cannot recognize the
inputsignalfromtheDVCorthe
unknown product,NoDevice or
****willappear instead.
7. Status
ofthecurrentoperationandthetimecounter
Eachicon means (Available icons
may varydepending onthe
DVC):
oDVCisinstop mode.
l>DVCisinplayback mode.
1.DVicon
2.lndicatorofactivedevice
•When theControlishighlighted, press[ENTER]todisplay theitem selection.Use
La.T]toselect thedevice you
wishtooperate, thenpress
[ENTER]toactivate.
• Select DVD
tocontrol thisunit.
• Select
Dvetocontrol yourDVC.
3.Recordingaudiomode
•Other thantheDVCisinstop
mode, theDV Audio canbe
selected.
Press[ENTER]todisplay
the item selection andthenuse
[...T]toselect theaudio you
wishtooutput.Press[ENTER]
again
toactivate.
• Select Stereo
1todubthestereo
sound.
• Select Stereo2
todubthesound
withafter recording sound.
• Select Mix
todubthestereol
and stereo2.
4.
Indicatorofdubbingfunction
• When theunitisready for
dubbing, StartRecwillappear.
• When the
unitisindubbing,
PauseRecwill appear.
5.
Channelposition
• When youselect DVbyusing
[INPUTSELECT~],DV will
appear.
DODVCisin pause mode.
DVCisfastforwarding.
(standard speed)
DVCisfastforwarding.
(faster thanabove)
DVCisfastforwarding.
(faster thanabove)
DVCisslowforwarding.
(standard speed)
DVCisslowforwarding.
(faster thanabove)
DVCisslowforwarding.
(faster thanabove)
[>«
[>
						

							o
Press[PLAY~]tostartplaying back
theDVC,andfindwhereyouwishto
startdubbing.
Then, press[STOP.]when youcome
tothedesired startpoint.
NowyoucanoperateyourDVCwiththeremote
control
ofthis unit.
With Control highlighted, press
[ENTER]
todisplaytheavailable
devices
tocontrolwiththeremote
controlofthis unit. UseL..IT]to
select DVC,thenpress[ENTER].
Press
[DISPLAY].
Press
[RECMODE]toselect
a
recording
mode.
(RefertoRecording Modeonpage33forDVDorRecording onpage 99forVCR.)
5
2
4
3
DISPLAY
INPUTSELECT
IV~
o0 0 0 0
~~~~~~~~~~Before
recordingfromDVC,seepage44forconnection
instructions.
Press[DVD]first.
Preparing forDVtoDVD dubbing:
•Insert arecordable discandmake sureyourDVCisin
video mode.
1
TOSHIBA
SE-R0295
Use[INPUTSELECT-E>]toselect DV.
6
7
Use[....IT]toselect Start Rec,then
press[ENTER].
Thedubbingwillstart.
Tostop dubbing;
Use [
....IT]toselect Control,then
press[ENTER].
Use [
....IT]toselect DVD,then
press[ENTER].
Then press [STOP
.].
DV~AB·1234o0:00:00
L_
EN47 
						

							Beforerecording fromDVC.refertopage44for
connection instructions.
e
STOP
REC
[!J]
TOSHIBA
SE·R0295
Press[VCR] first.
Preparing forDV toVCRdubbing:
•Insert arecordable cassettetapeandmakesureyour
DVCisinvideo mode.
1
2
3
4
5
Repeatthesteps 1and 2on page 47.
PressthePLAYbutton onyour DVC
tofindwhere youwishtostart
dubbing. Then,press
thePAUSE
buttonontheDVcamcorder when
you come
tothedesired startpoint.
Press[RECe]tostartrecording.
PressthePLAYbuttonorthePAUSE
button onyour DVCtoresumethe
playback.
Thedubbingwillstart.
To
pause therecording:
Press[PAUSEII]once.
RECwillflash.
Toresume recording:
Press[RECe]orpress[PAUSEII]again.
RECwill reappear.
Tostop recording, press[STOP.].
NoteforDVdubbing'''''''''''''''~''''~''m''''''-'''·,_....,=.,......-"'.....,.'~,..1
•Ifyoupress[PAUSEII]atstep 5inDVCtoDVDDubbing onpage47,the tape willrewindtothepointafewseconds preceding thepaused point.When youpress[ENTER]atstep 6inDVCtoDVDDubbing onpage 47, .
then,
itwill startdubbingwhenitcomestothepaused point.j
•TheunitdoesnotsendouttheoutputsignaltoDVC.I
.•For the proper operation, connectDVCtotheunitdirectly.DonotconnectthisunitandDVCviaany other unit.J
•Donotconnect morethan1DVC.i
•Theunitcanonly acceptDVC.OtherDVdevice suchascable/satellite boxorD-VHSVCRcannot berecognized.I
•If no video signalisdetected fromtheDVCduringDVCtoDVDdubbing, therecording willbepaused andewill~flashontheTVscreen. Therecording willresume whentheunitdetects thevideo signal again.~
•When theDVCisincamera mode,refertoGuidetoDVandOn-Screen Displayonpage46.I
•YoucannotdubfromDVCduring timerstandby mode.I
•YoucannotdubfromDVCtothebothDVDandVCRatthe same time..
•Youcannot change theoutputmodeduringDVCtoVCRdubbing.IfyouwanttoswitchtotheDVDmode, stop
the
VCRfirst.
• During
DVCtoVCRdubbing, youcannot change channels whilepaused.I
•WhenoutputisinDVDmode whileplaying backaDVDusing DV(L3l. youcannot switchtotheVCRmode.
. • Ifyou
areusing anything otherthanDV(L3)toplaybackDVD,youcanswitchtotheVCRmode,butcannot select
DV(L3)channel.(YoucanselectDV(L3)aftersWitchingtotheDVDmode duringVCRplayback.)
.•During timerstandbyofeither component, youcannot selectDV(L3)evenonthecomponent whichisnotintimer•..m~~.
•Date /time andcassette memory datawillnotberecorded.
• Pictures
witha copy-guard signalcannot berecorded.
• A
DVterminalisa terminalthatcanusethe transmission modeconformingtotheIEEE1394standards calledFire
Wire. Itserves
asthe interface thatconnects thePCandperipheral devicesuchasLLink (registered trademarkof.SONY).Itenables digitaldubbingbetweenDVdeviceswithlittledegradation. .jf;,,....-4l.-&ttl}.
48EN 
						

							DVDNCRDUBBING
Use[.A,,....]toselectDubbing
Mode,thenpress[ENTER].
Selection menuwillappear.
Use[.A,,....]toselect Recording,
thenpress[ENTER].
Recording menuwillappear.
Press [SETUP]anduse[.A,,....]to
select General Setting,thenpress
[ENTER].
General Settingmenuwillappear.
2
3
1
You cancopy aDVDtoacassette tapeorcopyacassette
tapetoaDVD.This function willbepossible onlyifthe
DVDorthecassette tapeisnotcopyprotected.
Before starting thisfunction, prepareforthe recording on
the DVD-RW/-R
orthecassette tape.Refertopages33
and99.
Makesure:
• Insert arecordable discandacassette tape
withanerase-protection tab.
Note forrecording
toacassette tape:
• The cassette tapeserase-protection tabisintact.
• The remaining
timeofthecassette tapeislongenough.
Note forrecording toadisc:
• Make sure
thatthediscisrecordable. Refertopage9.
TOSHIBA
SE-R0295
o0 0 0 0
Instructions continueonthe next page.
EN49 
						

							Use[./T]toselectDVD..VCR,
thenpress[ENTER].
4
1:,:~-'1.1\,1
I,,,
Use[./T]toselect VCR..DVD,
thenpress[ENTER].
r.:It.Genet!I1j.fu.h:~~'!;i
SOEN