Toshiba Dvr5su Owners Manual

							81ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
EDITING DISCS
Setting or Releasing the Title Protection
1
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 73 to display 
“E
dit” menu.
2
Use [K/ L] toselect “Protect”, then
press 
[ENTER].
Edit
Scene Delete
Edit Title  Name
Chapter Mark
Protect
JAN/ 6/11 1:00AM L1   LP
1
ORG
1 : 25 : 47
  If the title is protected,icon will appear in the original list.
3
Confirm the indication 
“OFF ON”. Press [ENTER] again.
  If the title is already protected, “ON  OFF” willappear. If you press[ENTER], the title will bereleased from protection.
Edit - Protect
OFF         ON
JAN/ 6/11 1:00AM L1   LP
1
ORG
1 : 25 : 47
  icon will appear on the title in the originallist.
4
Press [RETURN] and then [RETURN] or 
[STOPC] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
To protect a whole disc
(VR mo
de DVD-RW, DVD+RW/+R
on
ly):
Select “Disc Protect OFF ON” from the DVD Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on page 30.
To prevent the accidental editing, or erasing of the titles,you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.
Original
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PA U S EREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
ENTER
RETURN
STOP
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							82ENEN
EDITING DISCS
Setting or Clearing All Chapter Marks at Once
1
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 73 to display
“Edit” menu.
2
Use [K /L] to select “Chapter Mark”,
t
hen press [ENTER].
Edit
Edit Title  Name
Chapter Mark
JAN/ 6/11 1:00AM L1   LP
1
Video
1 : 25 : 47
3
Use [K /L]to select the desired
interval, then press [ENTER].
Edit - Chapter Mark
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
JAN/ 6/11 1:00AM L1   LP
1
Video
1 : 25 : 47
4
Use [K /L] to select “Yes”, then press
[ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.
5
Press [RETURN] and then [RETURN] or 
[STOPC] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
For titles in video mode DVD-RW, you can set or edit
chapter at every time interval. You can clear the chapter
mark too.
You can specify the interval of chapter marks for titles last
more than 5 minutes.
Note
 You cannot select a chapter mark interval thatexceeds the length of a title.
The length of chapters may slightly deviate from theone specified at the step 3.
A chapter mark may be delayed depending on the recording content.
 Maximum number of chapter for video mode DVD is99 chapters per title.
The interval for auto chapter may be up to two minutes different from the time option you set.
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PA U S EREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
ENTER
RETURN
STOP
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							83ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.Refer to the following table for useful operation.
Setup Items (highlight is the default) Contents
General Setting
g
PlaybackParental Lock
→ page 86
OFF
level 8 [Adult] to
1 [Kid Safe]
Set the parental level for DVD playback.
Audio Out
→ page 87
Dynamic RangeControlON
OFF
Compressing the range of sound volume.
PCM48kHz
96kHz
Set whether the sound recorded in 96kHz
will be down sampled to 48kHz.
Dolby DigitalPCM
Stream
Set the type of sound signal which outputsfrom the digital audio output jack.
DTSON
OFF
Set whether DTS signal is output or not.
Disc Menu Language
→ page 88gEnglish
French
Spanish
Other
Set the language for disc menu language.
Audio Language
→ page 88gOriginal
English
French
Spanish
Other
Set the language for audio.
Subtitle Language
→ page 88OFF
English
French
Spanish
Other
Set the language for subtitles.
Angle Icon
→ page 88ON
OFF
Set whether to display the angle icon or not.
Still Mode
→ page 88Auto
Field
Frame
Set the type of still image in pausing
playback.
DisplayOSD Language
→ page 89English
Fran
						

							84ENEN
Setup Items (highlight is the default) Contents
General Setting
g
RecordingAuto Chapter
→ page 35
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Insert chapter marks at even time interval.
Recording Audio Select (XP)
→ page 36
PCM
ygDolby Digital
Set the recording audio type. (Only when therec mode is set to XP.)
A
utoFinalize
→ page 31
Disc FullON
OFF
Set the unit to finalize the disc automatically.
End of Timer RecON
OFF
Aspect Ratio (Video mode)
→ page 36Auto
4:3
16:9
Set a aspect ratio for video mode recording.
Dubbing Mode
→ pages 49 - 50VCRDVD
DVD VCR
Set the VCR to DVD (DVD to VCR)duplication.
Make Recording Compatible
→ page 35
ON
OFF
Set to prohibit additional recording (OFF) orto replace the title list after recording (ON).
ClockClock Setting
→ page 26
Set the clock.
HDMIFormat
→ page 91RGB
YCbCr
Set the color space for the HDMI output.
 HDMI  Audio
→ page 91ON
OFF
Set whether to output the HDMI audio signalor not.
RGB Range
→ page 91Normal
Enhanced
Set the black-white contrast level for HDMIRGB output.
Reset All
→page 92
Yes
No
Set to the default setting.
LIST OF THE DEFAULT SETTINGS
Note
Your change to each setting stays on even when the power is off.An item which is not currently available is grayed in the settings.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							85ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
GENERAL SETTING
Press[STOPC] if you are playing back a disc.
1
Press [SETUP] and use [K/ L] to 
select “General Settin
g“, then press
[ENTER].
2
Use [K /L] to select “Playback”, then
press 
[ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
3
Use [K /L] to select a desired item,
then press [ENTER].
1234567
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Submenu will appear.
4
Refer 1 to7 on pages 86 - 88 and set 
t
he selected item.
5
When you finish with the setting, 
press [SETUP] to exit.
 Playback
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PA U S EREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
ENTER
SETUP
STOP
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							86ENEN
GENERAL SETTING
1 Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback 
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K/L] to select the desired level, then press [ENTER].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed toA.
If a password has been set already, proceed toB.
RATING EXPLANATIONS
l Control is inactive; all discs can play.
ftware of any grades (adult/general/children) can be played back.
[NC 17]: No one under 17 admitted.

d; under 17 requires accompanying 
parent or adult guardian.
l Guidance Recommended.
[PG13]: Unsuitable for children under 13.
l Guidance suggested.
l Audience.
[Kid Safe]: Suitable for children.
Note
Parental lock function may not be available to somediscs.
With some DVD, it may be difficult to find if they arecompatible with parental lock. Be sure to check if theparental lock function operates in the way that youhave set.
 Record the password in case you forget it.
 If there is a DVD in the unit when you set up theparental lock, press[OPEN/CLOSEA] to activate theparental lock level.
AA password has not been set yet.
Use [K /L] to select “Yes”, then press [ENTER]. Use [the Number buttons] to enter a new password except 
for 4737, then press [ENTER].
Change Password?
Ye s
NoPassword Input
Yes
Your setting will be activated.
BA password has been set already.
  Use [the Number buttons] to enter the current password.
Password Input
Your setting will be activated.
  If you want to change password, use [K/ L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password except for 4737, then press [ENTER].
Change Password?
Ye s
NoPassword Input
Yes

Your setting will be activated.
Note
Press[CLEAR] to erase numbers entered incorrectly.
When you forget the password or you want to clearall settings in “Parental Lock” menu, enter 4737 using[the Number buttons]in password input window. Password will be cleared and parental levels will beset to “OFF”.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							87ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
GENERAL SETTING
2 Audio  Out
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Use [K /L] to select a desired item, then press [ENTER].
Audio Out
Dynamic Range Control
PCM
Dolby Digital
DTS
A
B
C
D
ADynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
Use [K/L] to select a setting, then press [ENTER].
Dynamic Range Control
ON
OFF
Note
Dynamic range control function is available only on the discs which are recorded in the Dolby Digitalformat.
BSettings for PCM (Default : 48kHz)
Use [K/L] to select a setting, then press [ENTER].
PCM
48kHz
96kHz
48kHz  :  If your amplifier/decoder is NOT compatible 
with 96kHz PCM, select “48kHz”. 96kHz soundwill be output in 48kHz.96kHz  :  If your amplifier/decoder is compatible with 
96kHz PCM, select “96kHz”. 96kHz sound willbe output.
Note
When playing back disc with copyright protection
Even if you select “96kHz”, the sound will be downsampled at 48kHz.
CSettings for Dolby Digital (Default : Stream)
Use [K /L] to select a setting, then press [ENTER].
Dolby Digital
PCM
Stream
Your setting will be activated.
PCM  :  Converts the Dolby Digital into PCM (2 channel). 
When your amplifier/decoder is NOT 
compatible with Dolby Digital, set to “PCM”.Stream  : Outputs  Dolby Digital signals. 
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
DSettings for DTS (Default : ON)
Select a setting using [K / L], then press [ENTER].
DTS
ON
OFF
ON : Outputs DTS signals. 
If your amplifier / decoder is compatible with
DTS®, set to “ON”.OFF :  No DTS signal is output.
If your amplifier / decoder is NOT compatible 
with DTS®, set to “OFF”.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							88ENEN
GENERAL SETTING
3 Disc Menu Language (Default : English)
Set the language for disc menu.
Use [K/L] to select a language, then press [ENTER].
Disc Menu Language
English
French
Spanish
Other
Your setting will be activated.
4 Audio Language (Default : Original)
Set the audio language.
Use [K/L] to select a language, then press [ENTER].
Audio Language
Original
English
French
Spanish
Other
Your setting will be activated.hen “Original” is selected, the audio language will be
in the disc’s default language.
5 Subtitle Language (Default : OFF)
Set the subtitle language.
Use [K/L] to select a language, then press [ENTER].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for3 to5, press 4-digit code 
us
ing[the Number buttons].
Code Input
- ---
Refer to the language code table on page 100.
Note
Only the languages supported by the disc can be
selected.
Audio language setting may not be available to some discs.
 You can also change or switch off the subtitles on aDVD from the disc menu if it is available.
Press[CLEAR] to erase numbers entered incorrectly.
6 Angle Icon (Default : ON)
Set to “ON” to show the angle icon during the playback.
Use [K /L] to select a setting, then press [ENTER].
Angle Icon
ON
OFF
7 Still Mode (Default : Auto)
Select “Auto” usually.
Use [K /L] to select a setting, then press [ENTER].
Still Mode
Auto
Field
Frame
Your setting will be activated.
Auto : Optimum  resolution setting (“Field” or
“Frame”) wi
ll be selected.Field : Images in the still mode will be stabilized.Frame : Images in the still mode will be highly defined.
Note
Frame is one completed video image made up of two fields (There are 30 frames per second of NTSC video).
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							89ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
1 OSD Language (Default : English)
Set the language for the on-screen display.
Use [K /L] to select a language, then press [ENTER].
OSD Language
English
Français
Español
2 Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on theTV screen.
Use [K /L] to select a setting, then press [ENTER].
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
Your setting will be activated.
3 FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K /L] to select a setting, then press [ENTER].
FL Dimmer
Bright
Dark
You can choose one from “Bright” or “Dark”.
Front panel display stays off while the unit is in the
standby mode.
Press[STOPC] if you are playing back a disc.
1
  Press [SETUP] and use [K/L] to
se
lect “General Setting”, then press
[ENTER].
2
 Use [K/ L] to select “Display”, then
press [ENTER].
3
 Use [K/ L] to select a desired item,
then press [ENTER].
OSD Language
Screen Saver
FL Dimmer123
Submenu will appear.
4
 Press [SETUP] to exit.
Display
GENERAL SETTING
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PA U S EREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
ENTER
SETUP
STOP
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							90ENEN
GENERAL SETTING
1 Progressive (Default : OFF)
This unit is compatible with the progressive scan system.The feature provides you with the higher definition
images than the traditional output s
ystem does. To utilize
this feature, you must set progressive scan mode to “ON”.
1)  Use [K/ L] to select “ON“, then press [ENTER].
Progressive
ON
OFF
{/ {B] to select “Yes“, then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE : 
  If there is no picture or picture is
  distorted after selecting “Yes”,
  Wait about 15 seconds for auto recovery.
Activate?                                 Yes  No
K/ L] to select “Yes“ within 15 seconds, then
press [ENTER].Your setting will be activated.
Note
If your TV is compatible with progressive scan (480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to pages 20 - 21.) If not, use the RCA video cable and set the progressive scan to “OFF”.
If the Progressive Scan image is distorted, you cancancel Progressive Scan by pressing and holding[SETUP]for more than 3 seconds during DVD playback. The “Progressive” setting will be “OFF”.
When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).
2 TV Aspect (Default: 16:9 Wide)
You can select the TV aspect ratio to match the formats of 
what you are playing back with the unit and your TV 
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full 
height picture with both sides trimmed when playingback wide-screen picture.
If you have a widescreen TV:Select “16:9 Wide”.
Press[STOPC]if you are playing back a disc.
1
  Press [SETUP] and use [K /L] to 
se
lect “General Setting”, then press
[ENTER].
2
 Use [K/ L] to select “Video”, then
press [ENTER].
3
 Use [K/ L] to select a desired item,
t
hen press [ENTER].
Progressive
TV Aspect
Select Video123
Submenu will appear.
4
 Refer1to 2 on this page and set
the 
selected item.
For 3,refer to “SETTINGS FOR THE VIDEO
INPUT” on page 27.
5
 When you finish with the setting, 
press [SETUP] to ex
it.
Video
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PA U S EREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
ENTER
SETUP
STOP
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC