Toshiba Dvr5su Owners Manual

							11ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
FUNCTIONAL OVERVIEW
TRACKINGDUBBING SELECTVCR DVD
VIDEO L R DV INL2 L3
19 161514 20 21 171813129* 10 8
124 3* 57
11
6
22
DIGITAL
AUDIO OUTAU DIO
OUTS-VIDEO
OUT IN
COAXIALL
RL
Y
P
B/CBPR/CR
RL
R S-VIDEO IN  --- AU D I O --- OU T
I N  --- V I D E O --- OU T
COMPONENT
VIDEO OUTDVD/VCRHDMI OUT
(L1)
12
3791086453
(*) The unit can also beturned on by pressing
these buttons or by 
inserting a cassette tape.
 1. I/yyON/STANDBY button (DVD/VCR)Press to turn on the unit, or to turn the unit into thestandby mode. (To completely shut down the unit, you 
must unplug the AC power cord.) 2. Cassette compartment (VCR)Insert a cassette tape here. 3. AOPEN/CLOSE button (DVD)*Press to open or close the disc tray.  4. Disc tray (DVD)Place a disc when it is open. 5. VIDEO input jack (L2) (DVD/VCR)Use to connect external device with an RCA video cable. 6. AUDIO input jacks (L2) (DVD/VCR)Use to connect external device with an RCA audio cable. 7. DV IN jack (L3) (DVD/VCR)Use to connect the DV output of external device with a DV cable. 8. I REC button (DVD)Press once to start a recording.Press repeatedly to start the one-touch timer recording. 9. PLAYB button (DVD)*Press to start or resume playback. 10. STOP C button (DVD)Press to stop playback or recording.Press to stop the proceeding timer recording in DVD. 11. VCR/DVD indicatorLights up when the VCR/DVD output mode is selected. 12. VCR/DVD button (DVD/VCR)Press to select the component you wish to operate. 13. DUBBING button (DVD/VCR)Press to start VCR to DVD (DVD to VCR) duplication whichyou set in the main menu.
14. TRACKING/ buttons (VCR)Press to adjust the tracking during playback or in slow
motion of the cassette tape.While playback is in still mode, you can stabilize the picture.15. Display (“Off ” in standby)Refer to “FRONT PANEL DISPLAY GUIDE” on page 18.16. Infrared sensor window (DVD/VCR)Receive signals from your remote control so that you can
control the unit from a distance.17.IREC button (VCR)Press once to start a recording. Press repeatedly to start the
one-touch timer recording.
18. PLAY B button (VCR)Press to start playback.19. EJECT/STOP A/C button (VCR)When the unit is in stop mode, press to remove the
cassette tape from the cassette compartment. Press to stop cassette tape playback or recording.Press to stop the proceeding timer recording in VCR.20. FWDD button (VCR)Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward search).
21. REVE button (VCR)Press to rewind the cassette tape, or to view the picture
rapidly in reverse during playback (rewind search).22. Power indicatorThis indicator lights up in green when the unit is active andturns off when the unit is in standby mode.
  1. AC Power CordConnect to a standard AC outlet to supply power to this unit.Unplug this cord from the AC outlet to completely shut down the unit.
  2. HDMI OUT jackUse an HDMI cable to connect to a display with an HDMI
compatible port.  3. AUDIO OUT jacksUse to connect a TV monitor, AV receiver or other device 
with an RCA audio cable.  4. VIDEO OUT jackUse to connect a TV monitor, AV receiver or other device 
with an RCA video cable.  5. VIDEO IN jack (L1)Use to connect external device with an RCA video cable.  6. AUDIO IN jacks (L1)Use to connect external device with an RCA audio cable.
  7. S-VIDEO IN jack (L1)Use to connect the S-video output of external device with
an S-video cable.
8. COMPONENT VIDEO OUT jacksUse to connect a TV monitor with component video inputs
with a component video cable.9. S-VIDEO OUT jackUse to connect the S-video input of a TV monitor, AV 
receiver or other device with an S-video cable.10. COAXIAL DIGITAL AUDIO OUT jackUse to connect an AV receiver, Dolby Digital decoder or otherdevice with a coaxial digital input jack with a digital coaxial cable.
Note
Do not touch the inner pins of the jacks on the rearpanel. Electrostatic discharge may cause permanentdamage to the unit.
This unit does not have the RF modulator.
Caution on using S-video, component, or HDMIconnection for VCR:
Only the playback audio / video is available withthese connections.
Front Panel
Rear Panel
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							12ENEN
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote ControlUsing a Remote Control
Remote Control
Keep in mind the following when using the remotecontrol:ke sure that there are no obstacles between the remote 
control and the infrared sensor window on the unit.  Remote operation may become unreliable if strong 
sunlight or fluorescent light is shining on the infrared
sensor window of the unit. Remote control for different devices can interfere with 
each other. Avoid using remote control for other devicelocated close to the unit.  Replace the batteries when you notice a fall off in the 
operating range of the remote control.  The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of the center: approx. 23 feet (7m) within 30°
Install 2 AA (1.5 V) batteries matching the polarity indicated 
inside battery compartment of the remote control.inside battery compartment of the remote control.
Caution:
Never throw batteries into a fire.
Note:
Be sure to use AA size batteries.
Do not mix different types of batteries such asalkaline and standard (carbon-zinc).
Lithium or NiCad and NiMH rechargeable batteries arenot recommended for use with the remote control.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with theenvironment in mind. Always dispose of batteries inaccordance with applicable laws and regulations.
If the remote control does not operate correctly, or if the operating range becomes reduced, replacebatteries with new ones.
When necessary to replace batteries in the remotecontrol, always replace both batteries with new ones.Never mix battery types or use new and usedbatteries in combination.
Always remove batteries from remote control if theyare dead or if the remote control is not to be used for
an extended period of time. This will prevent batteryacid from leaking into the battery compartment.
1
Open the cover.
2
Insert batteries.
Make sure to match + and - on the batteries tothe marks indicated in the battery compartment.
3
Close the cover.
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PAUSEREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
18
2
3
20
19
21
23
25
2627
3334
32
22
30
28
29
31
3635
24
4
5
7
11
12
13
9
6
8
10
1415
116
17
TRACKINGDUBBING SELECTVCR DVD
VIDEO L R DV INL2 L3
23 feet (7m)23 feet (7m)23 feet (7m)
3030
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							13ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
 1. INPUT SELECTbutton  ppropriate input.2. OPEN/CLOSE A button DVD mode:  lose the disc tray. VCR mode:  pe from the cassette
compartment.3. Number/Character buttons
  gs in the main menu. DVD mode:  y.ess to enter title names. VCR mode:  /time search.4. SETUP button
  y the main menu.
  yback, press and hold for more than3 seconds to switch the progressive scanning modeto the interlace mode. (Thoughappears, the 
output mode switches to the interlace and“” will be displayed on the front panel 
display briefly.)  5.  DISC MENU button (DVD)    y the disc menu. To change original
and playlist on the TV screen. 6. CursorK/ L/{/ {B buttons    gs. 7. CLEAR button
  DVD mode:    password once entered, to cancel
the programming for CD, to clear the selectingmarker number in the display menu, etc.  VCR mode:    pe counter.  8.  INSTANT SKIP button (DVD)    yback, press to skip 30 seconds. 9. REVEbutton
  DVD mode:    yback, press to fast reverse playback.yback is in pause, press to slow reverse playback.  VCR mode:During playback, press to view the picture rapidly in reverse.    pe in stop mode. 10. PLAYB button    yback or resume playback. 11. SKIPHbutton (DVD)    yback, press to return to the beginning of 
the current chapter, track or file.    yback, press twice in quick succession to
skip to the previous chapter or track.    yback is in pause, press repeatedly to
reverse the playback step by step. 12. PAUSEFbutton
    yback or recording. 13. DUBBING button    plication
which you set in the main menu. 14. REPEAT button  DVD mode:    peat mode.  VCR mode:Press to set or release the Auto Repeat Playback. In the
Auto Repeat Playback mode, tape is played to its end, the
tape will rewind to the beginning and start playback itself. 15. TIMER SET buttonPress to set the unit in the timer standby mode. In the timer
standby mode, press to cancel the mode and to turn the unit on. 16.  HDMI  button (DVD)ess to set the HDMI video resolution. 17.II/yyON/STANDBYbutton    , or to turn the unit into the
standby mode. (To completely shut down the unit,you must unplug the AC power cord).
18. TRACKING/ buttons (VCR)  yback or in
slow motion of the cassette tape.hile playback is in still mode, you can stabilize the picture.19. SAT.LINK button  y 
mode.  y mode, press to cancel the 
mode and to turn the unit on.20. TIMER PROG. button
  y the timer programming list.21. AUDIO  button DVD mode:  yback, press to display the audio menu. VCR mode:  ying of a HiFi video tape, press to 
change the audio out setting to HiFi or mono.22. DISPLAY button
  y the display menu on or off.23. TOP MENU button (DVD)  y the title list.24. ENTER button
ess to confirm or select menu items.25. RETURN button  yed menu screen.26. TIME SLIP button (DVD)Press once to start recording the TV program you are 
watching. Press again to watch the content being recorded from the beginning while recording continues. (VR mode
DVD-RW with the recording mode of LP, EP or SLP only)27. 1.3x/0.8x PLAY button (DVD)  yback, press to play back in a slightly 
faster/slower speed while keeping the sound output.28. FWD D button DVD mode:  yback, press to fast forward playback.yback is in pause, press to slow forward playback. VCR mode:  yback, press to view the picture rapidly in 
forward.  pe in stop mode.
  yback is paused, press to view the cassette
tape in slow motion.
29.SKIPG button (DVD)  yback, press to skip to the next chapter, track or file.  yback is in pause, press repeatedly to 
forward the playback step by step.30. STOP C button  yback or recording. DVD mode:ess to exit from the title list.31. DVD button
  put mode.32. VCR button  put mode.33. RECI button  g.  y to start the one-touch timer recording.34. REC MODE button
  g mode.35. ZOOM button (DVD)yback, press to enlarge the picture on the 
TV screen.36. SEARCH button (VCR)Press to call up the index or time search menu.
FUNCTIONAL OVERVIEW
Note
 If you turn off this unit,[OPEN/CLOSEA] on theremote control is not available.Be sure to use [AOPEN/CLOSE]or [EJECT/STOPA/C]on the unit.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							14ENEN
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you want
to operate with[VCR/DVD].
DVD mode
Press[DVD]on the remote control.
(Verify that the DVD indicator is lit.)
VCR mode
Press[VCR]on the remote control.
(Verify that the VCR indicator is lit.)
Note
You cannot switch to the other mode in the timer-standby mode.
 Playback will stop when you change the output mode.
 THE VCR / DVD RECORDER SWITCHING
TRACKINGDUBBING SELECTVCR DVD
VIDEO L R DV INL2 L3
SELECT VCR DVD
OPEN/
CLOSEINPUT
SELECTHDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIOTIMER
PROG.
DISC MENU
CLEAR RETURNTOP MENU WXYZ
SAT.LINK
JKL MNODEFTRACKING
ENTER
INSTANT
SKIP
PLAY
DVD VCR PAUSEREV
SKIP
STOPSKIP FWD
1.3x/0.8x
PLAYTIME SLIP
TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
VCR indicator
DVD buttonVCR button
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							15ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
On-Screen Display / Menu
 GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Disc Information / MenuThe on-screen display changes in the following order
as you press [DISPLAY].
OFF
Disc Information/Menu
Title Name Information
(on
ly when DVD+RW/+R, VR mode DVD-RW/-R, or
un
finalized Video mode DVD-RW/-R is in playback)
or
File Name Information
(only when a CD with MP3/WMA/
JPEG files is in playback)
MP3/WMA Tag Information
(only when MP3 or WMA file is in playback)
HDMI Information
(only for the images output through the HDMI output)
L1 (Rear)
1/   5 1/   5-RWVRORG0:01:00 / 1:23:45
SP 1:53
25
613
7444
* This is an example screen only for explanation.
1.Indicates a disc type and format mode.
2.Indicates a type of titles for VR mode DVD-RW .
3.Indicates a selected external input mode.
4.Indicates a recording mode and possible recording 
time left.
5.Indicates a title number / total number of titles, chapter 
number /total number of chapters, elapsed time and
total time of disc playback.
6. Each icon means:
:
: 
:
:
::
:
:
: 
7.Indicates an operation status.
DVD mode
Note
In some descriptions on this manual, only one disctype is indicated as an example.
Search
Audio
Subtitle
Angle
Repeat
Marker
Noise Reduction / Black Level
Zoom
Surround
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							16ENEN
Video Info.   :          480p  /  YCbCr
Audio Info.   :          Bitstream
21
333
1. Indicates the resolution of the HDMI output image.
2
.Indicates the HDMI video format.
3.Indicates the HDMI audio format.
  “- - -” will be displayed, when it does not have any
in
formation.
HDMI Information
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Title name information
Title NameMy Title
File name information
File NameMy File
Title/File Name Information
  First, track name will be displayed.
Track Name
  If you press [DISPLAY]one more time, artist name will be displayed.
Artist Name
  If you press [DISPLAY]one more time, album name will be displayed.
Album Name
  If there is no artist, track or album name, “Not Available” will be displayed.
MP3/WMA Tag Information
VCR mode
0:00:00 HIFI SP12:00AM
453
2 1
* This is an example screen only for explanation.
1.Indicates current video status.
2.Indicates the current time.
3.Indicates a recording or playing back mode.
4.Indicates a tape counter.
5.Audio status of the current cassette tape.
VCR Information
Note
VCR information does not appear on the screenwhen the unit is connected by an HDMI, Componentor S-Video cable, except during the playback.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							17ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
1. Format(DVD-RW, DVD+RW only):
  Allows you to format the disc.
2. Finalize:
  Allows you to finalize a disc containing recorded titles.
3. Disc Protect(VR mode DVD-RW, DVD+RW/+R only): 
  Allows you to protect a disc 
from accidental editing or
recording.
4.Delete All Playlists (VR mode DVD-RW only):
 Allows you to delete playlist.
5. Random Play:
  Allows you to activate the random playback feature.
6. Program  Play:(Audio CD only)
  Allows you to activate the program playback feature.
7. Music:
Allows you to make settings for MP3 / WMA playback.
8. Photo:
Allows you to make settings for JPEG playback.
9. Slide Show:(JPEG files only)
  Allows you to select the display time of the slide show
mode.
DVD Menu
Format
Finalize
Disc Protect OFF      ONDelete All Playlists
11223344
1
2
3
4


Press[SETUP]to display the main menu. Then use
[K / L]to select a menu andpress [ENTER] to display the 
menu. These menus 
provide entries to all main functions
of the unit.
1. General  Setting:
 To go to general setting menu.
2. Timer Programming:
 To program a timer recording.
3. Title List:
  To call up the title list.
4. DVD  Menu:
  To set up the DVD setting.
5. DISC  Playback Mode:
  To set up the disc pla
yback setting.
  layback Mode” is available only when an
audio CD, a CD-RW/-R with MP3 / WMA / JPEG files is 
inserted into the unit.
Setup
Timer Programming
Title List
DVD Menu
DISC Playback Mode General Setting
1122334455
12345
DVD Menu / DISC Playback Mode
General Setting Menu
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All12345234
1
2
3
4
5
6
71. Playback:
  To set up the unit to play back discs as you prefer.
2. Display:
  To set up the OSD screen as you prefer.
3. Video:
  To set up the video setting.
4. Recording:
  To set up the unit to record to discs as you prefer.
5. Clock:
  To set up the clock.
6. HDMI:
  To set up the HDMI connection setting.
7. Reset  All:
  To reset the setting to the factory default.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Main Menu
DISC Playback Mode
Music
Photo
Random Play
Slide Show3738
3539
When a JPEG / MP3 / WMA disc is inserted:
DISC Playback Mode
Random Play
Program Play125
6
When an Audio CD is inserted:
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							18ENEN
 FRONT PANEL DISPLAY GUIDE
Appears when data is beingrecorded on a disc.
Appears when a disc is loaded on the disc tray.
DVD
Appears when the disc tray is
opening.DVD
Appears when HDMI videoresolution (720p) is selected.
Appears when HDMI videoresolution (1080p) is selected.
Appears when HDMI video
resolution (480p) is selected.
Appears when HDMI videoresolution (1080i) is selected.DVD
DVD
DVD
DVD
Appears when the disc tray isclosing.
DVD
DVD
Display Message
PMBS CS DR CD
VCR
HDD DB
DVD1
4
2
3
1.
PM:  Appears in the afternoon with 
the clock display.
2. Title / track and chapter mark
:  Appears when indicating a 
title / track number.
:  Appears when indicating a 
chapter number.
3. Current status of the unit
:  Appears when playback ispaused.
:  Appears when playing back adisc.
:  Appears when the timer
programming or OTR has 
been set and is proceeding.
:  Flashes when all timer
recordings have beenfinished.
:  Appears during recordingprocess.
:  Flashes when a recordingpauses.
:  Appears when this unit is in 
DVD output mo
de and a disc
is in the unit.
:  Appears during duplication process.
:  Appears when this unit is in 
VCR output mode and a
cassette tape is in the unit.
:  Appears during duplication process.
VCR:  Appears when this unit is in 
VCR output mode.
:  Appears when the timer recording is proceeding in VCR.
:  Appears when VCR is in the 
timer recording standby mode.
:  Flashes when a program 
cannot be performed forsome reasons.
DVD:  Appears when this unit is in 
DVD output mode.
:  Appears when the timer 
recording is proceeding in DVD.
:  Appears when DVD is in the 
timer recording standby mode.
:  Flashes when a program 
cannot be performed forsome reasons.
DB:  Appears during VCR to DVD
duplication process.
:  Appears during DVD to VCR
duplication process.
4. Displays the following
yback time
filenumber
g time / remaining time
Clock
lected external input position
g time for one-touchtimer recording 

Selected HDMI video resolution
Note
Front panel display stays off whilethe unit is in the standby mode.This is a new Power Save (ECO) feature.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							19ENEN
Disc 
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
VCR Function
Others
 CONNECTIONS
1) Disconnect the AC power cords of the devices from the AC outlet.2) Make the connection as illustrated below.3) After  making all the connections, connect the AC power cords of the devices.
Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures 
may be distorted due to the copy protection system.
TV Connection Overview
Note
  Required cables and connecting methods differ depending on the cable/satellite box.For more information, please contact your cable/satellite provider.
 Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jacks or
HDMI OUT jack for connecting to your TV.
With this setup:
  You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on.
 You cannot record one channel while watching another channel.
Supplied cables used in this connection are as follows:
dio cable (L/R) x 1deo cable x 1
Please purchase the rest of the necessary cables at your local store.
After making the connection as described above, make sure to select the appropriate input type by following the
steps on page 27.
 Connecting to an External Tuner
VIDEO IN
AUDIO IN
L
RL
RL
R I N  --- AUDIO --- OU T
I N  --- VIDEO --- OU T
ANT. IN ANT.OUT
L RVIDEO OUT AUDIO OUT
ANT. IN
DIGITAL
AUDIO OUTAU DI O
OUTS-VIDEO
OUT IN
COAXIALL
RL
Y
PB/CBPR/CRRL
R S-VIDEO IN --- A U D I O --- OU T
I N  --- VIDEO --- OU TCOMPONENT
VIDEO OUTDVD/VCRHDMI OUT
(L1)
(L1)
RCA video cable
RCA audio cable
RCA video cable
RCA audio cable
external tuner
rear of this unitRF coaxial cableRF coaxial cableor
satellitedish
cable TV company
COMPONENT VIDEO IN
AUDIO INL RVIDEO IN
S-VIDEO IN
HDMI IN
ANT. IN
HigherQuality
StandardQuality
If Your TV has Refer toIf your device has onlyan ANT. IN jackpage20
page21
page21
page22
page22
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC








 
						

							20ENEN
 CONNECTIONS
Connecting to a TV Using an HDMI Compatible Port
HDMI Video Resolution and Actual Output Signals
Press[HDMI]to select the HDMI video resolution. The video resolution changes as follows every time [HDMI] is
presse
d.
Front Panel DisplayVideo Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both theplayer and the display device (or an AV amplifier)support a copyright protection system calledHDCP (high-bandwidth digital content protectionsystem). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supportsHDCP. Please read the operating instructions of your display device (or AV amplifier) for moreinformation.
*HDMI: High Definition Multimedia Interface
he HDMI mode that is not supported by display device will be skipped.
Note
 Some devices with an HDMI input may not operate properly with this unit. When using an HDCP-incompatible display device, the image will not be viewed properly. Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however this 
unit cannot be controlled by another device via the HDMI connector. The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bitlength) may be limited by the device that is connected.  Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector. When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI 
converter cable, the signals are output in digital RGB. When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please
check and set the HDMI setting again.
 HDMI video resolution cannot be changed when the unit is in VCR mode.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
HDMI OUTHDMI OUTHDMI OUT
HDMI OUT
DIGITAL
AUDIO OUTAU DI O
OUTS-VIDEO
OUT IN
COAXIALL
RL
Y
P
B/CBPR/CRRL
R S-VIDEO IN --- A U D I O --- OU T
I N  --- V I D E O --- OU T
COMPONENT
VIDEO OUTDVD/VCR
HDMI IN
HDMI OUT
(L1)
HDMI cable
rear of this unit
Do not tilt the connector when inserting it into the HDMI jack, and make surethe shapes of the jack and the connector are matched.
0.@&/@CPPL@WJOEC


0.@&/@CPPL@WJOEC