Home > Toshiba > DVD Recorder > Toshiba Dvr5su Owners Manual

Toshiba Dvr5su Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Dvr5su Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21ENEN
    Disc 
    Management
    Recording
    Playback
    Introduction
    Connections
    Basic Setup
    Editing
    Function Setup
    VCR Function
    Others
    CONNECTIONS
     Connecting to a TV Using Component Video Input Jacks
    Connecting to a TV Using an S-Video Input Jack
    Supplied cables used in this connection are as follows:
     RCA audio cable (L/R) x 1Please purchase the rest of the necessary cables at your local store.
    Supplied cables used in this connection are as follows:
     RCA audio cable (L/R) x 1Please purchase the rest of the necessary cables at your local store.
    Y
    P
    B/CB
    PR/CR
    COMPONENT
    VIDEO OUT
    AUDIO
    OUT
    L
    R
    Y
    P
    B/CB
    PR/CR
    COMPONENT
    VIDEO IN
    AUDIO IN
    L
    R
    VIDEO IN
    DIGITAL
    AUDIO OUTAUDIO
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO I N  --- A U D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    (L1)
    RCA audio cable
    RCA
    component
    video cable
    rear of this unit
    (Green)(Green)
    (Blue)(Blue)
    (Red)(Red)
    AUDIO
    OUTS-VIDEO
    OUT L
    R
    S-VIDEO IN
    AUDIO IN
    L
    R
    VIDEO IN
    DIGITAL
    AUDIO OUTAU DI O
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO IN --- A U D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    (L1)
    rear of this unit
    RCA audio cable
    S-video cable
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							22ENEN
    CONNECTIONS
    Connecting to a TV Using Audio / Video Input Jacks
     Connecting to a TV without Audio / Video Input Jacks
    Supplied cables used in this connection are as follows:
    dio cable (L/R) x 1CA video cable x 1
    Supplied cables used in this connection are as follows:
    (L/R) x 1CA video cable x 1
     Please purchase the rest of the necessary cables at your local store.
    Note
     RF modulator is not supplied with this unit. You need to purchase it at your local store.The quality of picture may become poor if this unit is connected to an RF modulator.
    L
    RL
    R IN --- AUDIO --- OU T
    IN --- VIDEO --- OU T
    (L1)AUDIO IN
    L
    R
    VIDEO IN
    DIGITAL
    AUDIO OUTAUDIO
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO I N --- A U D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    (L1)
    rear of this unit
    RCA video cable
    RCA audio cable
    L
    RL
    R I N  --- AU D I O --- OU T
    I N  --- VIDEO --- OU T(L1)
    DIGITAL
    AUDIO OUTAUDI O
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    PB/CBPR/CRRL
    R S-VIDEO I N  --- AU D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT(L1)
    ANT. IN
    TO TV ANT. IN CHANNEL4 3VIDEO INAUDIO INL R
    ANT. INANT.OUTVIDEO OUTL RAUDIO OUT
    rear of this unit
    external tuner
    VHF / UHFantenna
    cable TVcompany
    or
    RF coaxial cable
    RF coaxial cable
    RCA audio cable
    RCA video cable
    RCA video cable
    RCA audio cable
    RF coaxialcable
    Set channel 3 or 4
    Set channel 3 or 4
    RF modulator
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							23ENEN
    Disc 
    Management
    Recording
    Playback
    Introduction
    Connections
    Basic Setup
    Editing
    Function Setup
    VCR Function
    Others
     CONNECTIONS
    Digital Audio Connection
    Coaxial Cable Connection
     HDMI  Audio Connection
    Setting in the Setup MenuActual Audio Output
    Audio Format (disc)Dolby Digital Settingof this unit(refer to page 87)
    DTS Setting of 
    this unit(refer to page 87)
    HDMI OutDigital Audio Out
    Dolby DigitalStream—Dolby DigitalDolby Digital
    PCM—2 channel PCM2 channel PCM
    DTS®—ONDTS®DTS®
    —OFFNo outputNo output
    LPCMStreamON2 channel PCM2 channel PCM
    PCMOFF2 channel PCM2 channel PCM
    Multi Channel Digital Audio Setting
    To set up “HDMI Audio”, refer to pages 84 and 91.
    To set up “Dolby Digital”, refer to pages 83 and 85 - 87.
    No supplied cables are used in these connections:
    Please purchase the necessary cables at your local store.
    COAXIALDIGITAL
    AUDIO OUTAUDIO
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO IN --- AU D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    COAXIAL(L1)digital audiocoaxial cable
    digital audio
    coaxial input jack
    rear of this unitDolby Digital decoder
    HDMI OUT
    HDMI IN
    DIGITAL
    AUDIO OUTAUDIO
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO I N  --- A U D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    (L1)
    AV receiver / amplifier with an HDMI input jack
    HDMI cablerear of this unit
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							24ENEN
     CONNECTIONS
    Note
     The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an 
    MD 
    or DAT deck.
     By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround 
    sound as heard in the movie theaters.
     By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
    original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
     Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
    For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
    If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select“Stream” in “Dolby Digital” setting (Refer to page 87).
     The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length)
    maybe limited by the device that is connected.
      Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
    with device such as this unit, audio signals are not output from the HDMI output connector.
    If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.
    Supplied cables used in this connection are as follows:
     RCA audio cable (L/R) x 1
    2 Channel Analog Audio Connection
    DIGITAL
    AUDIO OUTAU DIO
    OUTS-VIDEO
    OUT IN
    COAXIALL
    RL
    Y
    P
    B/CBPR/CRRL
    R S-VIDEO I N  --- A U D I O --- OU T
    I N  --- V I D E O --- OU T
    COMPONENT
    VIDEO OUTDVD/VCRHDMI OUT
    AUDIO
    OUT
    L
    R
    (L1)AUDIO INL R
    Stereo system
    RCA audio cable
    analog audio
    input jacksrear of this unit
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							25ENEN
    Disc 
    Management
    Recording
    Playback
    Introduction
    Connections
    Basic Setup
    Editing
    Function Setup
    VCR Function
    Others
    INITIAL SETTING
    When you turn on this unit for the first time, you need to follow these steps after you have completed all theconnections.
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    1
    After you have made all the 
    necessar
    y connections, press
    [I/yyON/STANDBY] to turn on the
    un
    it.
    2
    Turn on your TV.
    3
    Press the button on the TV’s remote 
    contro
    l that accesses the external
    input channel. It may be labeled
    “SOURCE”, “AV” or “SELECT” (refer to
    your TV’s user manua
    l). Or press “2”
    on t
    he TV’s remote control, then
    press c
    hannel down button
    repeate
    dly until you see the “Initial
    Setting” menu.
    Initial Setting
    Select the language for Setup display.
    OSD LanguageEnglish
    Français
    Español
    4
    Use [K /L] to select your desired
    lan
    guage, then press [ENTER] to set
    lan
    guage.
    5
    Press [ENTER] to activate “Clock 
    Settin
    g”.
    Initial Setting
    ENTER:     Set Clock.
    RETURN:  Exit Initial Setting.
    Clock Setting- - -  /  - -  /  - - - -  ( - - - )
    - -  :  - -  - -
    6
    Proceed to step 4 in “SETTING THE 
    CLOCK
    ” on page 26.
    ENTER
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							26ENEN
     SETTING  THE  CLOCK
    Set the clock before you try the timer programming.
    1
      Press [SETUP] and use [K /L] to
    select “General Setting”, then press
    [ENTER].
    2
     Use [K/L] to select “Clock”, then 
    press [ENTER].
    “Clock” menu will appear.
    3
     Use [K/L] to select calendar or time, 
    then press [ENTER].
    Clock Setting
    JAN / 01 / 2011 ( SAT )
    12 : 00 AM
    4
     Use [{/ {B] to select an item to set, 
    and use [K/ L] to select the contents 
    to suit your preference, then press
    [ENTER].
    Clock Setting
    JAN / 01 / 2011 ( SAT )
    12 : 00 AM
    Your setting will be activated.
    The clock start counting when you press[ENTER].
    5
     Press [SETUP] to exit.
    Note
    Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.
     For setting the day, year, hour and minute,
    [the Number buttons] can also be used.
    You can set the built-in calendar from the year 2009up to 2059.
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    ENTER
    SETUP
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							27ENEN
    Disc 
    Management
    Recording
    Playback
    Introduction
    Connections
    Basic Setup
    Editing
    Function Setup
    VCR Function
    Others
     SETTINGS FOR THE VIDEO INPUT
    You must let the unit know which video input jack you are using before making a recording.
    1
    Press [SETUP]. 
    2
    Use [K /L] to select “General
    Setting”, then press [ENTER].
    3
    Use [K /L] to select “Video”, then
    press 
    [ENTER].
    4
    Use [K /L] to select “Select Video”,
    t
    hen press [ENTER].
    5
    Use [K /L] to select the input jack 
    t
    ype to connect, then press [ENTER].
    If you want to use VIDEO IN jack, select “Video
    In”, then press[ENTER].
     If you want to use S-VIDEO IN jack, select
    “S-Video In”, then press[ENTER].
    General Setting
    Playback
    Display
    Video
    Recording
    Clock
    HDMI
    Reset AllProgressive
    TV Aspect
    Select Video
    Select Video - L1 (Rear)Video In
    S-Video In
    6
    Press [SETUP] to exit.
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    ENTER
    SETUP
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							28ENEN
     FORMATTING A DISC
    Choosing the Recording Format of a Brand-New DVD-RW
    When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will 
    always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recordingformat mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
    desired mode. You can also manually format a DVD-RW once it has been used.
    1
    Press [SETUP].
    2
    Use [K/ L] to select “DVD Menu”,
    t
    hen press [ENTER].
    Setup
    Timer Programming
    Title List
    DVD Menu General Setting
    3
    Use [K/ L] to select “Format”, then
    press [ENTER].
    DVD Menu
    Format
    Finalize
    4
    Use [K/ L] to select “Format Mode”,
    then press [ENTER].
    DVD Menu
    Format
    Finalize
    Start
    Format Mode
    5
    Use [K/ L] to select “Video mode” or
    “VR mo
    de”, then press [ENTER].
    6
    Press [SETUP] to exit.
    7
    Insert a brand-new disc.
    Formatting will start.
    Formatting 90%
    8
    Formatting is completed.
    “100%” is indicated.
    Note
    The recording format setting is effective only forDVD-RW. You cannot change the recording format for a DVD-R and DVD+RW/+R.
    You cannot mix two formats on one DVD-RW disc. If you insert a disc that has been formatted before, the
    recording format is not changed if you select anotherformat in the “Setup” menu only. To reformat a disc(change disc format type), refer to “Reformatting aDisc Manually” on page 29.
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    ENTER
    SETUP
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							29ENEN
    Disc 
    Management
    Recording
    Playback
    Introduction
    Connections
    Basic Setup
    Editing
    Function Setup
    VCR Function
    Others
     FORMATTING A DISC
     Reformatting a Disc Manually
    If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for 
    either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
    Insert a recordable disc.
    1
    Press [SETUP].
    2
    Use [K/ L] to select “DVD Menu”,
    t
    hen press [ENTER].
    Setup
    Timer Programming
    Title List
    DVD Menu General Setting
    3
    Use [K/ L] to select “Format”, then
    press [ENTER].
    e.g.) VR mode DVD-RW
    DVD Menu
    Format
    Finalize
    Disc Protect OFF      ONDelete All Playlists
    4
    Use [K/ L] to select “Start”, then
    press [ENTER].
    DVD Menu
    Format
    Finalize
    Disc Protect OFF      ONDelete All Playlists
    Start
    Format Mode
    Selection menu will appear and prompt you to confirm.
    , use[K /L] to select “Yes”, thenpress[ENTER].
    5
    Use [K/ L] to select “Yes”, then press
    [ENTER].
    Formatting will start.
    If you want to cancel formatting, select “No”.
    Are you sure?
    Ye s
    No
    6
    Formatting is completed.
    “100%” is indicated.
    Formatting 100%
    Note
    When you reformat the disc, the contents of the discare erased.
    For DVD-RW, make sure that the recording format isset to the desired mode. (See steps 1 to 6 in“Choosing the Recording Format of a Brand-New DVD-RW” on page 28.)
    This unit may not be able to reformat a disc that is not previously formatted by this unit (e.g. DVD disc formatted by PC or another recorder).
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    ENTER
    SETUP
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    							30ENEN
     SETTING A DISC TO PROTECT
    1
     Press [SETUP].
    2
     Use [K /L] to select “DVD Menu”,
    then press [ENTER].
    3
     Use [K /L] to select “Disc Protect
    OFF ON”, then press [ENTER].
    e.g.) VR mode DVD-RW
    DVD Menu
    Format
    Finalize
    Disc Protect OFF      ONDelete All Playlists
    4
     Use [K / L] to select “Yes”, then press
    [ENTER].
    Protect this disc?
    Ye s
    No
    A disc will be protected.
    This operation may take
    awhile to be completed.
    To prevent accidental recording, editing or erasing the
    titles, you can protect them from “DVD Menu” menu.
    Note
    To cancel the disc protect:
     When you insert a disc protected with this unit, “Disc Protect ONOFF” will appear instead of “Disc Protect OFFON”.
    DVD Menu
    Format
    Finalize
    Disc Protect ON        OFFDelete All Playlists
    To release the protection for the disc, select “Disc Protect ONOFF” at step 3, then follow rest of theprocedures. 
    OPEN/
    CLOSEINPUT
    SELECTHDMI
    .@/: ABC
    GHI
    PQRS TUV
    SPACE
    SETUP DISPLAY AUDIOTIMER
    PROG.
    DISC MENU
    CLEAR RETURNTOP MENU WXYZ
    SAT.LINK
    JKL MNODEFTRACKING
    ENTER
    INSTANT
    SKIP
    PLAY
    DVD VCR PA U S EREV
    SKIP
    STOPSKIP FWD
    1.3x/0.8x
    PLAYTIME SLIP
    TIMER SET ZOOMSEARCH REPEATREC REC MODE DUBBING
    ENTER
    SETUP
    0.@&/@CPPL@WJOEC0.@&/@CPPL@WJOEC 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Dvr5su Owners Manual